The Yakima OnRamp Bike Rack for 2 Electric Bikes, # Y36FR fits bikes with a maximum tire width of 3.25" and maximum wheelbase of 50". If your Aventon ebike fits these within these measurements, it will work. The padded clamps with ratcheting straps hold bikes securely by the frame or seat post. The Hollywood Racks Bike Frame Adapter, # HRBA-PRO can be used for alternate frames to provide a contact point for the clamps. The Yakima OnRamp, # Y36FR has a weight capacity of 66 lbs. per bike. view full answer...
There are no running boards which fit both a 2008 Chevy Silverado and a 1998 Chevy Blazer.
For your 4-door Blazer I recommend checking out the Westin Sure-Grip Running Boards # 27-6125-1105; these are 72" running boards that are 6" wide and have non-slip rubber pads. They are a bolt-on installation and you can even install a LED light kit # 27-6000 for some added style. There is also the option of using the Gap Strip for Westin Molded Running Boards # 27-9901 so you can conceal gaps between... view full answer...
The snow socks that will fit the 235/75-15 tires on your 1997 Chevrolet Blazer are ISSE Hybrid Snow Socks # TCH72. These snow socks have carbon steel rivets to offer traction and will simply stretch over the tire; they also come with a tote bag when you want to store them. view full answer...
The Draw-Tite Max-Frame Trailer Hitch, part # 75079 will fit all models Chevrolet Blazers from 1995 to 2005.
This is a Class lll trailer hitch and it has a 2-inch receiver opening.
This hitch will also fit 1996 through 2001 Oldsmobile Bravada and 1995 to 2001 GMC Jimmy. view full answer...
Yes, the CURT Trailer Hitch, # C13300, will fit your 2002 Chevy Blazer, 2-door, 4x4 model. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag.
For trailer wiring use 4-Pole Hardwire Kit Including Circuit Tester, # 18252. I have included a link to a video showing a typical installation of this wiring harness. view full answer...
Yes, the Landing Pad 19 # Y00245 are compatible with the SkyLine Towers for Yakima Crossbars # Y53TR. This will allow you to mount Yakima crossbars like the Yakima JetStream Crossbars # Y00425 on your 2023 Chevrolet Blazer S. view full answer...
I do have an option to obtain both a 4 and 7-way trailer connector on a 2019 Chevrolet Blazer but all of the plug-in-play harnesses like the T-One Vehicle Wiring Harness part # 118276 only come with either a 4-way or 7-way, not both. However, all you need to do to obtain both is purchase one of the plug-in-play 7-way trailer wiring harnesses and then replace the plug on it with the 7- and 4-Pole Trailer Connector Socket part # HM40975.
In regards to brake assist, there will be no additional... view full answer...
The Draw-Tite Class III hitch you'd looked at, part # 76023 fits the 2017 - 2019 GMC Acadia, the 2020 - 2021 GMC Acadia AT4, and the 2019-2021 Chevy Blazer.
The hitch will work perfectly on your Blazer. If you'll be towing with the hitch, you'll need a few other items to complete your towing system. You'll need a trailer wiring harness like # 118720 for a 4-pole connector or # 118276 for a 7-way trailer connector. You'll also need a # 2923 ball mount and # 19261 for a 1-7/8 or # 63845... view full answer...
I checked with CURT and this hitch will install with a spare tire mounted to your 1997 Chevy Blazer.
If you plan on doing some towing you may be interested in the following products to complete your towing setup:
Draw-Tite Wiring # 18252 (installation video attached)
Ball Mount # D-4
Hitch Ball with 2 inch Diameter and Medium Shank # 19247
Hitch Ball with 1-7/8 inch Diameter and Medium Shank # 19260
Pin and Clip # PC3 view full answer...
As long as the Jeep Wrangler has Roadmaster base plates installed, the Falcon tow bar will work. The Falcon tow bar is compatible with all Roadmaster base plates. If the Jeep has base plates from a different manufacturer, then an adapter will be needed. If you can tell me what brand the base plates are, then I would be happy to recommend the correct adapter.
If the Jeep does not have base plates yet, then I would just need to know the exact year and I will be happy to recommend a set... view full answer...
The best class III hitch for your 2023 Chevy Blazer is going to be the etrailer Trailer Hitch Receiver item # e36YR. This hitch is custom fit and bolts directly to your Blazer with included hardware.
I really like the etrailer item # e36YR hitch because it installs directly behind your rear bumper cover and can be completely concealed when it is not being used. This hitch has a 750 lbs tongue capacity so it will have more than enough strength for your Thule bike rack.
I have linked... view full answer...
The Curt trailer hitch # C13020 that you referenced fits:
1995 - 2005 Chevrolet Blazer
1996 - 2004 Oldsmobile Bravada
1995 - 2001 GMC Jimmy view full answer...
The 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e46SR was designed to be used without bushings so it does not come with any. A mono leaf and a multi leaf pack don't have a performance difference that's notable. They both can and work great. A mono leaf will affect ride height the least compared to the much thicker multi pack leaf springs. view full answer...
Yes, the Draw-Tite trailer hitch # 75079 will fit your 2004 S-10 Chevy Blazer!
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains... view full answer...
The Curt trailer hitch # C13020 will not interfere with the stock gas tank on a 2001 Chevy Blazer. It bolts to the sides of the frame so the gas tank should not be in the way when installing the hitch. I have linked a couple of videos showing typical installations and a link to the instructions for you to view.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And if you need to... view full answer...
For the easiest to use solution I would still go with the hitch mounted bike rack and just live without having a completely unobstructed view with the camera, because the alternatives are problemsome. A "trunk mounted" bike rack does not position the bikes any better. The SeaSucker suction cup mounts will not work properly in the back as there is not a flat area where the rear tires would go.
If you must use the camera unobstructed then this leaves you a roof mount option. You should... view full answer...
The best hitch for a 2023 Chevy Blazer is the Draw-Tite item # 76023. This hitch is custom fit and bolts to your Blazer with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight.
I really like the Draw-Tite Hitch item # 76023 because it installs behind your rear bumper cover and can be completely hidden when you are not towing. I have linked an installation video below so you can see how to get this hitch... view full answer...
Thanks for the additional information! For your 2023 Chevy Blazer, I recommend the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes item # HLY66ZR. This bike rack has a 70 lbs per bike capacity and fits tires up to 4-1/2" wide. The Destination uses padded clamps that grip your bikes by the downtubes or top tubes. This mounting method is perfect for bikes with step through frames. The clamps will slide up and down and rotate to fit almost any bike.
I really like the Destination... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit part # 108-1 which is a fit for a 1990 Chevrolet Blazer is designed for use with Roadmaster tow bars like the Roadmaster Tracker Tow Bar part # RM-020 which is our most cost effective option.
The Curt Tow Bar with Adjustable-Width Arms part # C19745 is designed to be a direct mount. view full answer...
The 5XM5 Universal Cross Member for SnowBear Snowplows # SB324-060 that you referenced is not vehicle specific as it fits Snowbear plows. The SnowBear plow brackets that fit your 1994 Chevy Blazer is the part # SB397-000. view full answer...
Go To Results