To install a trailer brake controller like the excellent prodigy P2 # 90885 in your 2008 Nissan Armada that does not have the factory tow package you will use a quick-connect harness # 3050-P. This plugs in between the controller and the port under your dash as shown in the linked video.
You'll also need 7-way and Relay Kit # N40975 which includes the trailer socket and the three relays that activate your wiring harness. An install video is linked for you. view full answer...
Whether or not your 2005 Nissan Armada has a factory-installed 7-way socket at the rear bumper it will also have a brake controller connection port under the dash. This is usually found above the emergency brake but the connector may be tucked in and hard to spot. You can use a quick-connect wiring adapter # 3050-P to install a Tekonsha controller like their highly-rated Prodigy P3, part # 90195. If you do not have the factory 7-way you will also need a 7-way/relay kit # N40975. view full answer...
We would need to know how big the current brakes are. 10x2-1/4 or 12x2 etc.
Sometimes you can re-use the drums from hydraulic brakes for electric brakes, sometimes not. If you are going to go ahead and replace the drums, we would need to know inner and outer bearing numbers. These are stamped right on the bearings. We would also need the bolt pattern of the drums. I have added a link to a wheel page that shows you how to measure bolt pattern at the bottom. Wheel diameter is important as... view full answer...
It sounds like you are missing the fourth relay that is needed to complete the running light circuit on your 7-way. You will need one of the blue relays that is included in the Curt Relay Kit # C57000, this product installs under the dash to the left of the steering column next to the brake controller connection point. view full answer...
Yes, to complete the installation of a brake controller such as the Tekonsha Primus IQ Trailer Brake Controller # TK90160 in your 2012 Nissan Armada you will use both a quick-connect adapter harness # 3050-P and the 7-way kit with relays, part # N40975. Written instructions are linked for you as well.
Please refer to the linked photo that illustrates the relays positioned in the power distribution box. view full answer...
We do have circuit breakers available, depending on what you need, such as the Pollak 40 amp In-Line Circuit Breaker # 9510, as well as the 20 amp # 9506P and 30 amp # 38630. I have added a link to our page with each of our circuit breakers for you.
If you happen to be referring to the relays that are necessary for Nissan models which do not have factory tow packages, you would need the Curt Relay Kit for Nissan Aftermarket Tow Package # C57000. You may also need relay 38666-1 for running... view full answer...
The relay kit, # C57000, will fit your 2005 Nissan Armada. On some Nissan vehicles, including the Armada, there is an additional relay needed in the in-cab fuse panel inside the vehicle. You will need to consult the vehicle owners manual for all of the fuse and relay locations related to trailer wiring. The extra relay can be obtained at a Nissan dealer.
If you want to add the complete wiring package, minus the extra relay required, use # N40975. I have included a video that should help... view full answer...
If you installed a trailer wiring harness on your 2013 Nissan Armada and the running lights are not working, then you may need to install an additional relay under the driver's side dash. You can use one of the blue relays from the Curt Relay Kit # C57000 for this. For some reason Nissan included the running light relay on some models but not others, even if they did not come with a tow package.
The location for the running light relay is behind the drivers side dash to the left of the... view full answer...
The Firestone Coil-Rite Air Helper Springs # F4150 will work with your OEM air suspension on your 2018 Nissan Armada as long as the air bags are not installed in the coil springs.
The air bag kit has a load-leveling capacity of at least 500 pounds (at most 1,000 pounds). It has an adjustable air pressure of 5 psi to 35 psi.
The air bags are made of a durable , elastic polyurethane.
I attached an installation video link below. view full answer...
While we do not have any towing mirrors that are confirmed to fit your 2021 Nissan Armada; the K-Source Universal Towing Mirrors # KS69ZR is a universal clip on mirror that will fit most applications spanning from 4-1/2" tall to 11-1/2" tall, and is likely to fit your mirrors.
If your mirrors fall in that range, then these mirrors will work for you. view full answer...
We have wiring harness kits for the 2017 Nissan Armada for both the versions with or without the factory tow package wiring. All appear on the linked page.
If you want a basic 4-pole wiring setup and there is no tow package wiring you will need to use the universal-fit hardwired 4-pole kit # C59496. This will splice into your tail light wiring using the supplied quick-splice connectors. This kit operates totally independent of any tow package wiring items and it will work on all Armadas.... view full answer...
Go To Results