Expert Answers about Audi Allroad

• Installation Instructions for the Curt Hitch # C11195 on a 2014 Audi Allroad
• We don't have an install video yet for the Curt Hitch part # C11195 for your 2014 Audi Allroad, but I did attach a set of detailed installation instruction in a link to the right for you to check out.
  view full answer...


• Is Install of Stealth Hitch on 2016 Audi Allroad Same Difficulty as Other Hitch Brands
• The trailer wiring that Uhaul would install would be basically the exact same thing as what comes with the Stealth hitch kit that fits your 2016 Audi Allroad with part # 391AUDA4A5S5T. I'd have them just install what comes with the kit as it's the same concept as what they have. The install is nothing crazy at all and any shop similar to them would have no problem installing the kit.
  view full answer...


• Trailer Wiring Harness for a 2011 Audi Allroad
• There is a chance that the wire colors and functions are the same between a 2013 Audi Allroad and a 2011 Audi Q5 but I would not chance it. You would want to test the wires using a circuit tester. The proper wiring harness for the 2013 Allroad is # 119250KIT. It comes with a little circuit tester. I do believe that on the connectors somewhere the slots are numbered. But this may not be true for all vehicles.
  view full answer...


• Low Clearance Tire Chain Recommendation for 2014 Audi Allroad with 245/45/R18
• For low profile tire chains that fit your tire size of 245/45/R18 I would highly recommend the Thule Easy Fit tire chains part # TH04115104. These chains are my favorite because they only require 9 mm of inner clearance, they have a 5 year warranty, but mainly because of how easy they are to install. Some chains are somewhat difficult to install, which is a pain when you consider the weather conditions you will be in when needing to install them. These chains on the other hand install...
  view full answer...


• How Long Will Installation of EcoHitch 306-X7324 Hitch on 2013 Audi A4 Allroad Take
• According to the folks at EcoHitch, the installation for their # 306-X7324 is fairly involved. It would require temporary removal of the rear bumper cover as well as trimming the fascia and heat shields under the vehicle. EcoHitch estimates that a professional installer would take approximately 2 hours to complete the installation. If your customer is planning on towing with the hitch, they'll also need a trailer wiring harness like # C59236, a ball mount like # 2753 and a trailer ball...
  view full answer...