Expert Answers about Audi A6

• Installing the Tekonsha Kit # 119178KIT on a 2007 Audi A6
• To install the Upgraded Circuit Protected Tail Light Converter Hardwire Kit # 119178KIT correctly to your 2007 Audi A6 you will simply need to use the included circuit tester to see which light functions you need to splice into. Since vehicle manufacturers are not always consistent with their wiring and since there is no standard for color wires to use this is the best method for installation. You will want to connect the following wires from the kit to the following functions on your...
  view full answer...


• Does C59496 Trailer Wring Come with Instructions for a 2006 Audi A6
• The # C59496 does come with a set of instructions, but they are not vehicle specific. They are a generic instruction of how to install the part, but you will need to locate the proper wires in the trunk yourself.
  view full answer...


• Does Curt Hitch C11423 for 2015 Audi A6 Require Fascia Trimming for Installation
• The light-duty Curt Class I hitch you referenced, part # C11423 for the 2015 Audi A6, does require some minor fascia trimming. I understand that since you are leasing the car you clearly do not want any issues when its time to turn it back in. You could simply remove the rear fascia and keep it until its time to return the vehicle. It is held on by 3 screws. I realize this may not be the most pleasing idea for aesthetic reasons but it does avoid the issue of having to deal with returning...
  view full answer...


• 2012 Audi A6 Trunk Liner Removal for Trailer Wiring Install
• From the research I did on your 2012 Audi A6 it looks like to remove the trunk liner you will need to remove the warning triangle that is in your trunk and then remove the screw that holds the emergency release handle in place. There are 10 panel clips that hold the trim panel in place. You can use a panel removal or gently pull on the panel to get it to remove.
  view full answer...