As long as the frame where a scissor jack like the etrailer.com # TJSC-24 has room to be mounted, there should be no issue replacing your current jacks. The base of the # TJSC-24 will measure 10-1/4" long by 3-1/4" wide, so as long as you have that kind of space you will be good to go.
However, it should be noted that this jack is designed to stabilize a portion of your trailer's weight and not to support the full weight of your trailer. Do not use this jack to lift your trailer or RV.... view full answer...
From what I've found on Winnebago's website, your Winnebago 1700bh Micro Minnie has a 3700 lb GVWR and is said to have a 4000 lb capacity axle which would use an L68149 inner and a L44649 outer wheel bearing.
I'd recommend checking the inner and outer wheel bearing cages to ensure those reference numbers are engraved on them. If you do indeed have the L68149 and L44649 bearings, you'll want to use the # BK2-100 bearing kit you'd looked at. The kit includes the inner and outer bearing,... view full answer...
To ensure you get the correct parts for your 2004 Winnebago Minnie Winnie Motorhome, first we need to identify if your steps have already been updated to the IMGL. If you still have the original motor and control unit you will likely need the Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145. You can identify if you already have had this kit installed by comparing your control unit. They changed the shape of the control unit for the IMGL steps.
If you already have the IMGL upgrade... view full answer...
From what I understand from your question, you are needing a replacemet tail light for a Demco Kar Kaddy 260. We have that in Replacement 4-1/2" Round Tail Light for Demco Kar Kaddy Tow Dolly, # DM35MV. This replaces the 4-1/2" round, enclosed tail light for Demco Kar Kaddy tow dolly models KK260 or KK360. view full answer...
If you are just straight up replacing the part with the Replacement Damper # BCA0472-00 then it will perform the same as your old one which means it will probably be making that flapping noise when you're on the highway.
Normally there is some way to keep the damper stationary so I would look for any places where a tab has been broken or something like that so you can repair it and keep the damper stationary during travel. view full answer...
I spoke with Lippert and they told me that the Lippert Components Kwikee Large Rectangle Door Switch Kit part # LC379406 is indeed correct for your 2008 Winnebago Access Motorhome as it has a normally closed circuit. view full answer...
For your 2003 Winnebago Motorhome, if you do not have a Kwikee Step with the IGML, then there is another motor you can still use as a replacement/upgrade.
It's part # LC379608. This is designed for steps made between 1999 and 2006 that do not have the IGML. I've linked to a video review of this motor for you to look at. view full answer...
The Optronics Trailer Clearance or Side Marker Light part # MC57AB can be used with or without a grommet it is a standard size type light that can be utilized many different ways.
As for the pigtail as you said in theory should be there but it always varies and in some cases it won't be there. I would pick one up and add it regardless just to make changing it in the future much easier if need be. The Right Angle 2-Wire Pigtail for Optronics Trailer Lights part # A46PB is the one to use. view full answer...
Yes, the # MA10-20281K-1AF is a replacement operator mechanism needed. It will also work for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents. view full answer...
Since you can't fold in the steps on your 2018 Winnebago Minnie I recommend the MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps # MR85HR. The mounting bracket for these steps attaches on the outside below your door.
Since they are removable they can still be stored to keep them protected just like fold in steps. They are also adjustable so they will remain sturdy even on uneven land. These steps are designed for an entry height of 21-1/2" to 27-1/2". view full answer...
The Jensen RV Stereo # JWM60A is a great option to replace your the Jensen AWM960. They feature very similar dimensions and capabilities but the connectors are not exactly the same so it won't be a plug-and-play replacement. However, it is still an easy install and I have attached an image from the installation manual showing the wiring functions that you can use for reference. I have also attached a few product review and installation videos that you might also find helpful. view full answer...
For your 2008 Winnebago View, it sounds like you want to replace the plastic shroud on your AC unit. If this is the case, then you have a Coleman Mach system and the correct replacement shroud is the MaxxAir TuffMaxx Replacement Shroud - White # MA00-325001.
If this is not what you were referring to let me know and give me some more info so I can be of further assistance. view full answer...
We do carry RV water pumps. The Seaflo Diaphragm Pump for RVs # SE24FR is a self-priming, automatic-demand water pump with a 5-Chamber diaphragm that provides high-volume water flow with reduced cycling.
It has overall dimension of 8-1/2" long x 5-3/4" wide x 5-3/16" tall and mounting dimensions of 2-1/4" long x 3-3/16" wide. The hose barbs attach to 1/2" tubing which is most likely what you have in your RV. view full answer...
We have a way to get the replacement U-bolts for the Roadmaster Steering Stabilizer part # RM42RR with the part # RM-RBK22 which includes all of the mounting hardware but we do not have just the U-bolts by themselves. view full answer...
We can certainly point you in the right direction, although I do not have a way to look up exactly what model converter/charger you currently have in your 2017 Winnebago Micro Minnie. If you can provide the brand and model number of your current battery charger/converter I would be happy to confirm the correct replacement. For example if your current battery charger/converter is rated for 45 amps the Progressive Dynamics 9300 Series RV Converter Charger # PD69RR which is compatible with... view full answer...
According to Progressive Dynamics, their # PD4645V Replacement 45A converter would be the proper replacement for your Parallax 7345 power converter. The unit is designed as a direct replacement for the converter in your existing power center/electrical panel. view full answer...
We have the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001 (for white) or # MA00-335002 (for smoke). These lids replace old or damaged dome lids on your roof vent. They have a No-drill installation on Ventline Ventadome's or a universal-fit hinge and hardware included for other vents.
If you know the make and model of your current vent, we do have some vent covers that are specific replacements. If you provide me with the make and model number, I would... view full answer...