With a 3 wire system:
If your Rabbit has combined stop and tail lights AND has an additional tail light wire independent of the stop light wire, here is what you will need to do. Attach the red stop light wire from the harness to the combined stop and tail light circuit. Then attach the brown wire from the harness to the independent circuit. Turn signal functions will need to be tapped into at the front of the vehicle at the headlight assemblies.
If the vehicle has a 2 wire system:
The... view full answer...
If your 2007 VW Rabbit has a 3-wire system, your vehicle would have a combined stop and tail light circuit. To wire this system on your vehicle, you would need to attach the red stop light wire from part # 119250KIT, to the combined stop and tail circuit. Then attach the brown wire from the harness to the independent circuit. The wires for the turn signals will need to be wired in at the headlight assemblies at the front to the vehicle.
If your vehicle has the 2-wire system you will need... view full answer...
Go To Results