The Pop and Lock # PAL5500 does come with the slot available for the backup camera, but does not replace the factory camera or add one to your vehicle. This part is a confirmed fit on the 2011 Toyota Tacoma. If you wanted to add a power locking mechanism you would want to use part # PAL8525 in addition to the PAL5500.
There is not currently a tailgate lock that we have available that would add the tailgate camera to your Tacoma if you don't already have it present. view full answer...
Yes, there are gaskets/seals between the valve portion of the Valterra EZ Valve Electric Waste Valve # E40B-8 and the 3" hub sections. Just use ABS Solvent # A05-0303 when you install this to 3" spigots and you won't have to worry about any leaks! view full answer...
The Access LiteRider Soft, Roll-Up Tonneau Cover # A36039 is a fit for your 2019 Honda Ridgeline. You will see the Z shaped brackets in the attached video and the tonneau will come with everything needed to install including those brackets. There is not a separate purchase necessary. The Ridgeline simply has a different style frame rail than the traditional truck bed rails that they use the c-clamps for. The Z-brackets shown in the video is what will come with this part number for installation... view full answer...
Yes, the Omega RV Double Dome Light # 328-001-902XPW includes the two 921 incandescent bulbs. The rear of the light (please see the linked photo) shows the back of the included on-off switch and also the two pigtail wiring leads for making your 12V power hookup.
If you ever want to replace the standard bulbs with high-efficiency LEDs that will use less power you can do so using an item like # DI74ZR, which is sold as a pair. This LED emits a pleasant warm white light and uses only about... view full answer...
With the tire size 235/55 that you included, I cannot confirm for sure if the Thule Spare Me 2 Bike Rack # TH963PRO will fit your non-standard spare tire for sure. This is because I need the last number of the tire size (the wheel's diameter). However, I can confidently say the rack will most likely fit your wheel's diameter because the maximum diameter that is compatible with the Spare Me 2 is 33 inches (which is a pretty large tire). Although, I can 100% confirm that the 235mm width... view full answer...
Since the door in question does not already have a window in it then Valterra Frame Assembly and Glass for RV Entrance Door - 12" x 21" Item # A77051 provides the frame and glass as well as 8 screws for installation. Any sealant such as # 0160297 you would want to use is not included.
The frame is two halves and the glass so it can come apart so you can switch out the glass. Or you can use # A77008 which is just the frame and no glass or hardware. view full answer...
The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5755 includes the brackets, uprights, and bars, to install the OverHaul HD on the rails of your truck bed. These parts are for the installation of the ladder rack and do not include any hardware for the tonneau cover itself. With the hardware provided, it allows you to install the OverHaul HD (which is compatible with the Retrax XR tonneau cover). I went ahead and attached a picture of all the hardware that... view full answer...
The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A61409 does come with a weather seal that goes in front of the toolbox and there is also a weather seal that goes behind the toolbox to prevent water, snow, and dirt from entering the truck bed. You do not need to buy anything else for installation, as everything including the seals will be included with this tonneau cover. I attached a demonstration video for more insight on this cover. view full answer...
The Thule Xsporter Pro Mid Overland Truck Bed Ladder Rack # TH34RR that you referenced comes with everything needed to install including the crossbars. view full answer...
For a set of custom fifth wheel rail brackets confirmed as a fit for your 2008 Ford F-250 you'd want the part # RP50082 as this is the bracket kit of the # RP50082-58 which is the correct fit for your truck.
Since the hardware that attaches the rails to the brackets is only designed for one time use you would also need the part # 58164. view full answer...
I am attaching a link to the product page for the head assembly of the B&W Companion # BWRVK3370.
The head assembly can be found on our site listed as part # BWRVC3006. You can find the current pricing listed on the product page. view full answer...
The Timbren Rear Suspension Enhancement System # TDRTT1500 you were looking at for your 2017 Ram 1500 are indeed sold as pairs and includes everything you need to install them on your truck.
I included a video of the # TDRTT1500 for you to take a look at. view full answer...
No. The K-Source # KS70608T does not have a turn signal on the mirror glass or on the back of the housing; it will only provide power movement and heated mirror functioning. view full answer...
Replacement Thumb Turn Cam Latch Cylinder # 295-000013 does not come with an offset latch. We have others that do including # CAM44323 (7/8 inch thick) and # CAM44333 (5/8 inch thick). view full answer...
The Equa Flex Equalizers like the # LC314336 that you referenced actually come with Never Fail bushings installed in them already. Your best option would be to put the old bushings back into the equalizer as long as you didn't damage them.
Normally if there is an issue with the Never Fail bushings of the Equa Flex equalizers it's a warranty claim since they have a lifetime warranty. If yours are damaged I can check to see what Lippert recommends. view full answer...
Yes, 2 fishwire are included to help install the 1/2" bolts for the etrailer.com Trailer Hitch # E98845 on your 2016 Dodge Journey.
Attached is a sample installation video and the written instructions for you to check out. If you let me know what you will be using the trailer hitch for I can make additional recommendations if necessary. view full answer...
The SumoSprings Solo Custom Helper Springs # SSR-121-54 will include 2 sets of M10-1.5 bolts for mounting in place of the factory bump stop. The lengths are going to be 55mm and 80mm to account for the different height spacers that you may need. view full answer...
The 12" Balloon Tire Beach Wheels for Malone Clipper or Xpress Kayak Cart # MPG516 do not include any shims or parts for mounting to the Cart. You will need to reuse or source the appropriate shims if you have lost them. view full answer...