Expert Answers about Viking

• Potential Replacement Keys for a 1988 Palomino Stallion Popup Camper
• There is a good chance that the Valterra 751 Replacement Keys for RV Hatch Doors # A524VP are what you are needing. These are going to be the standard CH751 key set that's going to go with most RVs. They come from the factory with this 751 locking core. Since you have an older popup the likelihood of this being the right key is very high even though I can't completely guarantee it. If you have a number on the lock core, you can take a look at that to try and find the right key. If you...
  view full answer...


• Replacement Trailer Jack for Viking Legend Pop-Up Camper
• What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton # FXP100W0301 and the # P9012-00 bracket. This is a swivel jack, so when the pop-up is hitched to the tow vehicle, pull the pin and swing up the jack so it stores parallel to the trailer frame. This prevents the caster from hitting anything while towing and getting damaged, which from...
  view full answer...


• Replacement Idler Hub For 2004 Viking Epic 1906ST Pop Up Camper
• To verify which hub will best fit your 2004 Viking Epic 1906ST popup you are going to need to disassemble a hub to check the bearings and seals. The only information I could find is you have a 2,200lb AL-KO torsion axle. This should use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K which uses the same inner and outer Bearing # L44649(1.063" inner diameter) and a Grease Seal # 10-9(1.500" inner diameter). It has a 5 on 4-1/2" bolt pattern which you can verify is stamped...
  view full answer...