Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it - I am unable to tell from your parts list if the drawing of the equalizers are your measurements or referencing something else) apart from bolt hole to bolt hole you can use the Road Armor Shock Absorbing Equalizer Kit # LC696740 with the MORryde... view full answer...
I do have some options for you to replace the Dometic 56-2281-10/03 but I was not able to find any specs for this. That said, if you simply measure the unit and compare this to the sizes we offer below via the link, you should be able to get a pretty close match to your original microwave. The Greystone Standard RV Microwave part # 324-000105 for example could be a suitable replacement measuring 19" wide x 13-1/2" tall x 14-1/4" deep without the trim kit and 23-3/8" wide x 15" tall with... view full answer...
The latch that you have referenced is the Lippert Components Slam Latch Baggage Door Handle part 305288. However, this latch is obsolete and there are no direct replacements for this. If you like, you can use the Lippert Components Slam Latch Baggage Door Handle part # LC227214 and enlarge the cutout but other than that you would need a new door according to Lippert. view full answer...
The best option I have for you to mount the frame brackets on the trailer frame for the Pro Series Weight Distribution System without interfering with the battery box would be with the Chain Hangers for Reese Weight Distribution Systems part # RP58305.
I would not have any shorter bolts that secure the standard frame brackets to the frame on the above weight distribution system. view full answer...
Yes, you can replace the current Firestone standard duty compressor you have now with the part # F9284 and you'd be set. It would easily bolt right up and wire in place. view full answer...
For a replacement leaf spring the part # e84SR would work great as this is a 2,000 lb axle leaf spring with exact dimension you have of 2-3/8 inches. For replacement shackles we have the part # TRSL313 which is the size you need of 3-1/8 inches. For wet bolts you'd want the part # 126B2 and then for cushioned equalizers you could use the part # LC279687. view full answer...
Go To Results