Yes, so long as your Rack & Roll trailer is from 2015 or newer, you can replace the lever's locking pin assembly so you don't have to get the entire Replacement Center Frame Rail # 8880727. The correct replacement part is the following:
- Replacement Tail Block Locking Assembly # 8880334 view full answer...
The spring bar retainer pins do come included with the Replacement Head for Blue Ox SwayPro, like the # BXW4012. Unfortunately, for the Blue Ox SwayPro models they are not available separately. view full answer...
Considering that you've flushed the brake lines, we can rule out a clog causing this issue and because you've already replaced the master cylinder, it's not outside of the realm of possibilities that the actuator just needs to be replaced. You could check the actuator bolt/shock on the coupler mechanism as that might be what's sticking and creating this issue, but as you've seen, replacement parts for Atwood couplers are difficult to come by.
For this reason, I do recommend simply replacing... view full answer...
Based on the photo, I don't believe you have a Westin Grille Guard # 45-3540 because they have a different top bar and don't have the same bend or number of bars at lights. I believe what you have pictured is the Aries Grille Guard - 1 Piece - Polished Stainless Steel # AA5058-2. For the replacement bracket you will need the Replacement Bracket Kit BRKT-5058 and you can only get those from the manufacturer.
We do have the Replacement Installation Hardware Kit for Westin Sportsman Grille... view full answer...
The magnets you have been using with the yellow wires should be the correct units for your Dexter 12-1/4 x 4 inch shoes. When replacing them I recommend sticking with the same assemblies. The Replacement Magnet Kit (with yellow wires) # BP01-301 that you referenced are designed to work with Dexter electric brake assemblies that have either the 12-1/4 inch x 3-3/8 inch or 12-1/4 inch x 4 inch dimensions, which is why you also saw them recommended for 3-3/8 inch assemblies.
Going with a... view full answer...
We have a couple of possibilities for brackets that will work, but you do have to know the exact manufacturer and model of your Ram's nerf bars in order to get the correct brackets. The 5" oval nerf bars that fit your 2018 Ram 1500 Crew Cab are manufactured by Westin, and I'll list the name of the bars, their part numbers, and the replacement hardware for you.
- Westin PRO TRAXX Oval Nerf Bars - 5" - Polished Stainless Steel # 21-53560 or Black Powder Coated Steel # 21-53565 use Replacement... view full answer...
The correct Replacement Mounting Hardware Kit for Westin PRO TRAXX Oval Nerf Bars part # 21-23565 on a 2018 Ram 1500 Crew Cab is the part # 21-2356PK. view full answer...
If your 2015 Ram does not have RamBox then the Lo Pro QT you have is part # TX546901 and the replacement cover is part # TX546901-CVR.
If your truck does have RamBox then you have part # TX547901 on your truck in which case you need part # TX546901-CVR instead. view full answer...
The Replacement Load Stop Assembly for Erickson Aluminum Truck Bed Ladder Rack, part # EM57705. is what you need for the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum, part # EM07705.
I have included a product description link below. view full answer...
The correct replacement tarp for your Extang BlackMax # EX2425 (DISCONTINUED) is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1425. view full answer...
The Roadmaster End Link Kit # RM-590147-00 contains 2 end links which are 11" from center to center. These include polyurethane bushings and mount using the included 1/2" hardware. view full answer...
Replacement mounting hardware kit # 21-2352PK is designed for Westin PRO TRAXX nerf bars # 21-23520 or # 21-23525 which are for the 2009 - 2014 Ford F-150 SuperCrew or 2011 - 2014 Ford F-150 Raptor SuperCrew. They will not work on a 2015 Ram 1500.
The Westin PRO TRAXX nerf bars for the 2015 Ram 1500 Crew Cab are # 21-23560 or # 21-23565. And for those bars you would need replacement mounting hardware kit # 21-2356PK. view full answer...
Your Magic Tilt Boat trailer likely has very standard leaf springs so you would just need to verify the style (double-eye or slipper), the width and length of the spring, and the axle capacity in order to find the correct replacement. When measuring your leaf springs you'll want to jack up the trailer by the frame to take the weight off of the springs first, otherwise you'll end up with the wrong measurement. Depending on the wear and tear on the springs they could also have flattened out... view full answer...
For a set of snap-on tow mirrors that are a confirmed fit for your 2020 Ram 1500 we have the K-Source Tow Mirrors part # KS80730 as a confirmed fit that would work great. These install easily and provide a stable and wider view behind you when towing.
I attached an install video link to this page for these mirrors on a 2020 Ram 1500 just like yours as well. view full answer...
I believe you are referring to the rubber rail seal kit. If so the correct replacment rail seals for your BAKFlip F1 Hard Tonneau Cover part # BAK72207RB is the Replacement Rubber Rail Seal Kit for BAKFlip Truck Bed Tonneau Covers part # PARTS-326A0010. This product is the only replacement rail seal BAK offers at this time.
If this is not the part you are referring to please let me know and I would be glad to point you in the right direction. view full answer...
We used to have a Curt A16 hitch with a universal rail kit as part number C16121 but we decided to change the part number configuration. So instead you'd need the rail kit part # C16200 and then the Curt A16 by itself # C16120 and you'd have the same configuration. view full answer...
We sure do!
You will need to use # RHK and enter the hitch item number for your trailer hitch receiver which is 14374 and in the manufacturer drop down select Curt.
I included a video of the Curt Trailer Hitch Receiver # 14374 being installed on a 2015 Ram 1500 for you. view full answer...
The Westin Replacement Step Pad # 23-0001 does measure approximately 21 x 3-inches but it is intended for the 3-inch E-Series bars like # 23-3545. I checked all Westin step fits for your truck, shown on the linked page, and no 4-inch round steps are offered currently.
But if you refer to the photo I linked you can compare the spacing of the mounting posts to your pads to see if this will still fit your steps. view full answer...
If you have a Reese weight distribution system then we have replacement bolts and washers # 58133. The bolts are not stainless steel or chrome. For that you would have to get some locally rated grade 8.
If you want just the washers use # 58024. view full answer...