bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Prevost


  • Replacement LCI RV Step Module for 164889
  • Is it possible the module number is 164889? That cross referenced with our part # LC301702 but the 164989 that you referenced does not match anything I can find.
    view full answer...

  • Recommended Long Rectangular LED Tail Light That is 15 Inches Long and 2 Inches Wide
  • I may have a solution for you, but there is not a tail light that has those exact dimensions. However, if you've measured from the mounting holes on your existing lights, the Bargman # 47-54-001 might be the best option since the mounting holes are 14-1/2" apart and the overall dimensions are close at 15-7/8" x 2-1/4". The only other option that is close would be the LED Tail Light for RVs Under 80" Wide - Stop, Tail, Turn - Weatherproof - 20 DIodes - Red Lens # DG52435VP, which is 12-3/4"...
    view full answer...

  • Is Curt Echo Bluetooth Brake Controller a Good Fit for a Class A Motorhome
  • The Curt Echo # C51180 is kind of hit or miss when it comes to a motorhome on a Class A chassis because of both the length and the amount of solid things that can get in the way of the signal. With that being said, the Echo is designed so that if there is any interference it will stick with the last known settings you were using so you really only lose the manual override function when it disconnects. Since there really isn't a defining way to know if it will work well with any specific...
    view full answer...

  • Option For Hitch With at Least 10k Capacity For 2000 Prevost H345
  • There are no custom-fit hitches for your 2000 Prevost H345, so the only thing you may be able to do is use a universal, weld-on hitch, such as the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 62" Wide # C97CR. This will work with frames that are between 18 inches and 62 inches wide, and has a 20,000 lb capacity. I have added a link below to our entire list of weld-on hitch options. Then for a 24 volt brake controller you'll need the Redarc Tow-Pro Elite Brake Controller...
    view full answer...

  • Recommended Trailer Hitch And Wiring For A 2005 MCI D4000 Bus
  • Since there isn't a custom fit hitch you'll need to use an adjustable width hitch like # 41990-16 and weld it to the frame. Your next step would be the wiring, for this you'll need to splice into the tail lights of your 2005 MCI D4000 bus with the 4-Pole Hardwire Kit with Circuit Tester # 18252. From there you can install the Universal Installation Kit for Trailer Brake Controller # ETBC7 to give yourself a 7-way for your tow bar wiring from your towed vehicle to connect into.
    view full answer...