The only company that makes a plug and play 4-way compatible with backup sensors is Curt and it is the # C63NR. I'm guessing you already found this and saw it is only compatible with LED tail lights. You can either splice-in the # 18252 or swap out the tail lights for LED to use the Curt. Unfortunately, nobody makes a plug and play wiring harness that will work with the backup sensors and incandescent lights. view full answer...
Hey Frank, thanks for reaching out again!
The Yakima ShowDown # Y04081 needs the crossbars to extend at least 3-1/2" out past the towers for proper fitment, and Yakima states not to use these with roof racks that clamp to a roof so you wouldn't be able to use the ShowDown with the naked roof on your 2010 Honda Accord Crosstour.
If you're wanting some help loading the kayak up to the Yakima Kayak Roof Rack w/ Tie-Downs # Y04083-04082 you previously asked about, I recommend checking out... view full answer...
The Curt Trailer Hitch Receiver # C88VV only fits the 2019 - 2024 Lexus UX 250H. There are no hitches available for the UX 200. If you would like to add one to your UX 200 the only option would be to take the # E17 to a fabricator and have them fashion a custom hitch for your vehicle. view full answer...
HI Kevin,
The Curt Front Mount Trailer Hitch Receiver # 31108 will not fit your 2004 Chevy Silverado with a grille guard installed. This is true of any front hitch though, so if you do want to use the hitch you'd have to take off the grille guard. view full answer...
Hi Kim,
Yes, the MORryde RV Door Latch Extender # MR22JR would be a compatible fit with an RVLock branded entry door lock. You'll just want to double check that you have enough clearance based on the steps listed below. view full answer...
Unfortunately the Manik is not a brand we carry. So I have no way to know what mounting hardware would work for that grille guard. We do have the Hardware Kit # AA89DQ which is custom fit for the Aries Grille Guard # AA3048 for your 2003 Ford Explorer Sport Trac. This may be able to be work but would likely require some modification. view full answer...
Yes, it does. The T-One Vehicle Wiring Harness # 118763 has been confirmed to fit both the hybrid and standard models of the 2023 Toyota Camry LE. view full answer...
It sounds like you are asking if a Reese weight distribution system head will fit on a Draw Tite weight distribution shank which the answer to that is yes. view full answer...
Yes, if you use the extension # Y07016 with the Yakima SkinnyWarrior Roof Rack Cargo Basket # Y07014-16 it will work fine with your 2023 Toyota Tacoma. view full answer...
Hey there Jeff, good question, and I think you were referring to the Patriot as there isn't an 18,000 lb Companion. And the answer to your question is an unequivocal yes, a 12,000 lb 5th wheel like your Montana High Country can absolutely be pulled using the 18,000 lb B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270.
You made a great choice with the Patriot, as not only is the weight rating correct, but there just isn't a better overall value for a 5th wheel hitch, in my opinion.... view full answer...
Hi Dave,
The etrailer Invisible Base Plate Kit # e98948 and Blue Ox Base Plate Kit # BLU53FR are designed slightly different, but both are compatible fits for your 2023 Jeep Gladiator. The # e98948 is going to be an easier installation since you won't have to cut into the frame rails and shows as a compatible fit with Blue Ox tow bars without the need for an adapter. view full answer...
Great question Roger, we actually don't have any feedback from users regarding to a kickstand so I'd assume it works just fine without one since no one's called to that directly.
Also, the Malone Traverse # MAL29AR does have an adjustable bunk height ranging from 16" to 18", and can be widened from 3 1/2" to 16", so you'll get plenty of customizability to fit your application.
If you feel like you need a kickstand, the Malone ClipperTRX Deluxe Kayak/Canoe Cart with No-Flat Tires # MAL68FR... view full answer...
Hey Mike, you have a good eye so it was definitely smart to check. I went ahead and checked directly with WeatherTech for you and while there are front floor mats that fit your 2022 Hyundai Tucson Plug-In Hybrid, the part you mentioned is not a fit - those are for the standard hybrid. Instead, the correct front floor mats for your Plug-In Hybrid are the following:
- WeatherTech Front Auto Floor Mats # WT66ZQ
I verified these are the only front floor mats for the Plug-In Hybrid version... view full answer...
Hi Joseph,
The Pace Edwards Switchblade # PE46QJ unfortunately will not work with the Ram Boxes but Pace does have the JackRabbit # 311-M-JRD87A08 and BedLocker # 311-M-BLD87A08 as compatible fits. The JackRabbit has built-in stops every 12" so that you can lock the cover partially open. The BedLocker has an electro-magnetic brake that can stop and lock the cover at any point along the rails. view full answer...
Yes, your black spare that you have is one that is compatible with the etrailer hitch part # e98844. It's only the aluminum wheels that won't fit and what you have is not the aluminum one Nick. view full answer...
The Superchips programmer part # SU3845 does fit your 2008 Chrysler 300 that has the 3.5 liter engine and it does have ability to make changes to some transmission settings like shift points and shift firmness but it does not have ability to do any Chrysler updates. view full answer...
To extend your 7-Way wiring connector we have the TorkLift Wiring Harness Extension for 42" SuperTruss or Cannon Hitch Extender # TLW6042 and you can secure it to your extender with the mounting bracket # PK12711U.
The safety chains are specifically designed for TorkLift extenders so you'll have to pick up a set like the 44" long Tow Ready Safety Chain Kit with Clevis Hooks # 49150 and modify them for your application for that part of your towing setup.
Attached are some review videos... view full answer...
Yes it sure does; the Curt Trailer Hitch Receiver # C12030 does fit a 2015 Hyundai Tucson.
Also wanted to note that if you have this hitch and plan on transferring it from an '11 to a '15 Tucson that hardware cannot be reused as it is unsafe to use again. So if you do happen to need new hardware you can get that with Replacement Hardware Kit for Trailer Hitches # RHK. view full answer...
Hi Steve,
We do indeed have fat tire wheel trays for your Swagman E-Spec Bike Rack. The correct part for your rack is the following:
- Fat Tire Adapter Kit for Swagman G10 and E-Spec Bike Racks # S64679 view full answer...