The Hopkins Vehicle Wiring Converter, part # HM48915, is used for a vehicle that will have a 3-wire system, which means it would have separate stop and turn signals, to plug into a trailer with a 2-wire system, which has the stop and turn signal combined.
Your 2000 Plymouth Neon will have a 2-wire system, so the # HM48915 converter is not needed. To get a 4-way on your Neon you can use the Draw-Tite Wiring Hardwire Kit, part # 18252. Using the included circuit tester these wires will tap... view full answer...
The Curt # C13362 will fit perfectly if your 1998 Plymouth Voyager as long as it isn't a sport model. Once installed, the hitch won't interfere with the spare tire, although you might need to push the spare toward the front of the vehicle while raising or lowering it.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # C55334, a # 2753 ball mount and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
I've linked to an install video for the hitch. view full answer...
The great thing about the Everchill Refrigerator for RVs # 324-000110 is that it is a universal design so you can definitely use it with your older Sea Ray Sundancer, just note the external dimensions of 17-1/2" wide x 17-3/4" deep x 19-1/2" tall so that you know it will fit.
To get this to work with 12V power you just need an inverter. You can use the Go Power Inverter # 34280173 which is rated for 225 watts and then instead of using the alligator clips use the installation kit # 342GPDCKIT1... view full answer...
We don't have a custom fit trailer hitch receiver for your 1979 Plymouth Volare. We are a retailer and not a hitch manufacturer, so we don't make the hitches we sell. I'd suggest you consider having a local fabrication shop help you fabricate an option utilizing something like the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames, # UF35-946403. There will need to be special fabrication to fit your vehicle, but this hitch will get you started. You will also need a ball... view full answer...
If you have theDraw-Tite Max-Frame Trailer Hitch # 75119 on your 1998 Plymouth Grand Voyager, you will be happy to know that it does fit your 2007 Dodge Grand Caravan as well, providing your Dodge does NOT have the stow and go seating.
If your Dodge DOES have the stow and go seating then the Curt Trailer Hitch # 13389 is the correct hitch for your minivan.
Hitches can be swapped out between vehicles, however, the attachment hardware is not meant to be reused under any circumstances. Replacement... view full answer...
As long as the bolt pattern (5 on 4-1/2 inches) and offset (+.5 inches) fit then it should work. I would certainly double check your measurements and keep in mind that this wheel is for 14 inch tires. I have also attached an article on determining bolt patterns that will help. Otherwise, you should be good to go.
Additional information and video attached. view full answer...
It depends on the hose. The part that you came from, # T0778500, is a fitting. Hose for high temperature engine applications such as # D15799 would work with engine oil just fine. This is 25 feet worth of hose. It is available in different lengths:
8 feet # D15740
5 feet # D15701
All of these lengths have a 1/2 inch inner diameter. view full answer...
Go To Results