The Thule Elite Van XT 2 Bike Rack for Ram ProMaster Rear Door part # TH302013 is an excellent option for a 2018 Ram Promaster Van. That said, it is designed to be used with the factory rear windows. Therefore, you would not be able to open the rear windows unless you were to first remove the rack portion but you could still leave the track installed. view full answer...
I would recommend the same as SumoSprings. The temptation is to go with the highest rating as it seems like that would be the most supportive, but in reality you want to go with the best matched capacity which balances ride quality and support. Going with too high of a capacity will give you a harsh ride quality that you wouldn't like. So the kit you'd want then is the part # SSF-106-40 which is the correct fit and capacity. view full answer...
The length I'm seeing for your 2023 Pleasure-Way Ontour 2.2 Class B motorhome is 21' 10" so the Classic Accessories PolyPro III Deluxe RV Cover # CA80104 would be a compatible fit. This cover fits Class B motorhomes from 20' to 23' in length. This cover has straps and cam buckles to help tighten up the excess slack and has zippered panels on the rear and passenger side so that you can still access the motorhome without removing the cover. view full answer...
After doing some research I found out that your LT 215/35 R16 tire has a 21.9 inch diameter. You will need The Classic Accessories Custom Fit Spare Tire Cover # 052963751000.
This cover has an elastic back hem that gives it a fast and adjustable fit. It has a rugged wipe-clean vinyl with a soft, non-scratch backing. The cover is also water-repellent and resistant. The cover has a 3-year warranty.
I attached a review video link below. view full answer...
We do have SumoSprings for your 2023 Pleasure-Way Ontour 2.2. According to SumoSprings, the # SSR-121-47 you were looking at will fit your motorhome, our guide just isn't updated for the 2023 yet. These have a capacity of 1,500 lbs and help reduce sway while smoothing out your ride. view full answer...
From my research it looks like what you have right now is a High Pointe microwave that has overall dimensions of 20.5" W x 13.19" H x 20.4" depth, has an output of 1,000 watts and a 1.1 cubic feet oven capacity.
The recommended replacement, the High Pointe RV Convection Microwave # HP49ZR has overall dimensions of 20-1/2" wide x 14-3/4" tall x 18-11/16" deep, an output of 1,000 watts, and the same 1.1 cubic feet oven capacity, making the replacement only 1.5" taller and 1.71" less deep... view full answer...
Hello, we actually have a couple options available for you. While we do not have the exact same regulator available, Fairview GR-9959, we have two options from different manufacturers that are similar specs and either will work well as a replacement for your current GR-9959.
The first is the item you linked to that is a great product, the JR Products Horizontal Low Pressure 2-Stage RV LP Gas Regulator, # 37207-30385. But we also have my preferred option, the MB Sturgis Horizontal 2-Stage... view full answer...
Yes, the spout on the Phoenix Faucets 8" Single Handle RV Kitchen Faucet part # PF231321 does indeed swivel for use with double bowl sinks. The aerator on the end can be removed to flush the lines so I don't see any reason why you could not install a filter so long as the threads match which they should. view full answer...
I have a seat cover that will work great but there are no custom fit options for bench seats on your Pleasure-Way Plateau Motorhome. I recommend the Aries Automotive Seat Defender Bench Seat Protector item # AA3147B. This black cover is 63" wide x 58" tall. It has two covers that go over the headrests with hook-and-loop straps. It also has cutouts that will open so you can access any seat belts.
I have linked a review video below so you can see what this cover looks like and how to set it up. view full answer...
I can assure you, as I did verify the fitment directly with the manufacturer, TorkLift. So the EcoHitch front hitch will definitely fit your 2021 Pleasure-Way Ascent motorhome on a Mercedes Sprinter 2500 chassis, with the correct part number being the following:
- EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7352
As far as trimming, you will just need to trim a 5" x 3" rectangle under the front bumper fascia to allow the hitch receiver to protrude. view full answer...
It would be perfectly fine; there are no issues to be aware of connecting the Optronics LED Trailer License Plate Light with Bracket # LPL56CB. view full answer...
From the hitch pin of the Thule # TH9037 to the very top measures 4.3 inches and for the Kuat # PVP20B the same dimension is 5-3/16 inches so it would have a little less rear door clearance. view full answer...
The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80104 that you referenced fits Class B motorhomes 21' - 23' in length so you'll actually want the Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80103 instead.
This cover fits models up to 20' in length and will give your 2012 Pleasure-Way Plateau TD Class B Motorhome a nice snug fit. RV cover manufacturers do leave a bit of excess to fit spare tires or AC/vents on the roof of... view full answer...
Yes, the WeatherTech Front Auto Floor Mat - Gray # WT4610631 will fit your 2012 Pleasure-Way Plateau TD motorhome since it's a Mercedes-Benz Sprinter cab. If you would like the floor mat in black you would need part # WT4410631. view full answer...
I'll start out by saying that if the manufacturer of the vehicle states a 220-lbs tongue weight limit, then that is the safe limit they've tested for the frame; there may be other items at the rear of your coach that will also put stress on this portion of the frame. You will always be limited by the lowest rated component in any hitch/vehicle/accessory combo and in this case the vehicle's frame can only handle 220-lbs of tongue weight, so what the hitch is rated for won't matter.
In... view full answer...
Yes we do! The Roadmaster Rear Anti-Sway Bar # 1139-178 is designed specifically for the 2-wheel drive E-350 chassis that your 2008 Pleasure-Way Pleasure Way Class B is built on. It features a 1-1/2" diameter bar which is much more effective than the OEM bar or any of the competition. view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225 pivots down 90-degrees as shown in the photo, but specific rear door clearance on your RV would depend on several factors so we cannot guarantee your rear doors would still be able to open. The things that matter are the tire size on the RV and of course the spare, the hitch height and the RV's own stance above ground, which is a function of the total load in it.
My contact at Roadmaster hears customer comments all the time on... view full answer...
We've checked with SumoSprings in the past with this question and they have told us that between 1/2 inch and 1 inch is standard clearance between the frame and the SumoSprings like the part # SSR-121-47 that you referenced. view full answer...
Yes, both the handle and spout parts of the Phoenix Faucets 8-Inch Single Handle RV Kitchen Faucet # PF231421 rotate or swivel side to side.
The faucet handle swivels to allow convenient one-hand selection of the water temperature and the faucet spout swivels left-right to allow you to choose where the water flow is directed in your sink. This means that if you have a double-bowl sink you can direct the water flow in one or the other as needed.
This lead-free faucet features an attractive... view full answer...
The Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier # Y34ZR when swung away is going to line up with the passenger side corner of the vehicle and would allow for full access to the driver's side door and only partial access of the passenger side door. I've attached a picture below of a Sprinter van with this rack installed to give you a better idea of how this would sit on your 2023 Pleasure way Ontour 2.2 motorhome. view full answer...