Expert Answers about Oshkosh

• Will Roadmaster Reflex Steering Stabilizer # RM-RBK8-RSSA Fit on 1995 Winnebago Diesel Motor Home
• To determine the line of Oshkosh chassis that is on your 1995 Winnebago Diesel motor home you will need to give a Winnebago dealer the vehicle identification number (VIN) off of your motor home and have them determine what chassis model is used on your motor home. The manufacturer can identify the chassis by the VIN number. The VIN is usually stamped onto a metal strip or plate, and mounted on the driver's side door (or door jamb) on Class C motor homes, or near the steering wheel on...
  view full answer...


• Suspension Enhancement for 1993 Oshkosh X-Line
• We do not have a steering stabilizer available for the 1993 Oshkosh X-Line but we can help with suspension enhancements such as the Timbren Front Suspension Enhancement System, # TOSHFV and Timbren Rear Suspension Enhancement System, # TOSHRV. These hollow rubber springs help to stabilize and level your Oshkosh X-Line by absorbing road shock and improving roll stability. On the rear of the vehicle, the rubber springs will set on top of the axle to provide additional support. This added...
  view full answer...


• Timbren Rear Suspension Enhancement System TOSHRV Height for 1994 Oshkosh X-Line
• The combined height of the Timbren Rear Suspension Enhancement System item # TOSHRV for your 1994 Oshkosh X-Line is 6 3/8". The spring height is 4 3/4" and the bracket height is 1 5/8". The system has a max compression of 2 1/4". Timbren also recommends a 1/2" to 1-1/2" of clearance between the axle and frame after the timbren is installed, so the ideal space between the top of the axle and the bottom of the frame should be 7"-8".
  view full answer...


• Steering Stabilizer Recommendation for 1995 Winnebago Luxor on Oshkosh Frame
• For your RV built on a 1995 Oshkosh chassis we have the Roadmaster Steering Stabilizer part # RM-RBK8-RSSA which will fit and work well. We do not have a front sway bar or bushing though.
  view full answer...


• Weld-On Gooseneck Coupler Recommendation for 3-1/2 Square Stock Tube
• The Bulldog Coupler Repair Kit BD0287740300 is designed for a round coupler so if you have a square tube you'll have better luck with the Gooseneck Coupler Head Kit # GC-HEAD. This is designed around etrailer and RAM round and square gooseneck couplers but since it's a weld-on installation you shouldn't have any issues getting this installed. Attached is a review video for you to check out.
  view full answer...


• Steering Stabilizer Recommendation for 1991 Mallard 25 Sport Class A
• I spoke with my contact at Roadmaster and we are fairly certain we have a fit for a steering stabilizer. Everything can find on your 1991 Mallard 25 Sport indicates that you have a 1991 Oshkosh M-Series chassis and would indicate that you would need the part # RM-RBK8-RSSA. There are also several other Series made by Oshkosh in that year that would also use this stabilizer as a fit. My contact at Roadmaster told me to have you check the plate up by the driver seat where the VIN and chassis...
  view full answer...


• Motor Upgrade Kit And Air Springs For A 1995 Oshkosh X-Line
• I spoke with Lippert, and they said since you have a 1995 step, you are going to need to order the Motor Upgrade Kit for Kwikee Electric RV Steps # LC29VR, which includes a new motor, controller, and door switch. This is because around 2006 Kwikee changed/updated their electronics on these steps, so the old parts are now obsolete. They also did mention that you can also purchase a new set of steps If you'd rather do that instead. Additionally, you can absolutely install an air ride...
  view full answer...


• How Do Namsco Wheel Liners NA7195D0 Install
• The Namsco Wheel Liners # NA7195D0 fit the front and rear dually wheels on your 1994 Oshkosh X-Line and they mount as shown in the linked diagram. Lug nut covers are included but not the actual lug nuts; you'll use yours. The rear dual liners are held in place by some of your lug nuts and the hub covers are held by the others. Once you have tightened all the lug nuts to spec to secure the liners and hub covers, you'll apply the included lug nut covers. For valve extenders that mount on...
  view full answer...


• Which Namsco Wheel Liner Covers Can fit 22-1/2 inch Wheel with 10 Lug Bolt Pattern
• We have wheel covers that could fit but it depends on the amount of hand holes your current wheels have which is correct. Part # NA228H52J is for if you have 5 hand holes per wheel, part # NA228H20J is for if you have 2 hand holes, and part # NA228EM0 is for if you have 10 hand holes.
  view full answer...