You are in luck, one of our co-workers happens to have a Hollywood bike rack for Class II hitches and I checked several of the hitch pins that we have available to see if they would work with bike rack. I found that the SportRack Anti-Rattle Bike Rack Hitch Lock, # SR0901, has the same thread size and pitch to work correctly with this brand of rack. I also found that the Yakima replacement hitch bolt and clip, # Y8890176, will also work with this rack and can be used with the Yakima HitchLock,... view full answer...
You will need the Reese Replacement 7-Way RV-Style Trailer Connector # A10-7072VP on your 2000 Oldsmobile Bravada if you have the factory wiring connector behind your bumper. If your Bravada does not have the factory tow package wiring you will need the Universal Wiring Harness w/ ModuLite and Brake Controller Harness - 7-Way Trailer Connector # 22551. Both of these will give you a 7-way connector which you can then use an Adapter # 37385 when you have a trailer with a 4-way or 5-way flat... view full answer...
There are 5 items needed to flat tow a vehicle. But first, you will want to consult the vehicle owners manual for your 2003 Oldsmobile Alero for specific information on flat towing it. In my research I found that there is a 65 mile an hour speed restriction and there may be some fuses that have to be pulled so the battery does not drain while towing.
You already have one component, the tow bar, so next you will need base plates. Roadmaster base plates # 194-3 are compatible with the Falcon... view full answer...
The Curt Trailer Hitch # C12044 Per the manufacturer, the distance from the pin location to the end of the receiver tube is 2 inches and is confirmed to fit your 2006 Buick Lucerne.
The trailer hitch has a bolt-on installation. I recommend this hitch over other hitches because it has a gloss black powder coat finish and will show less scratches. The trailer hitch has a maximum gross trailer weight up to 3,500 pounds, and has a maximum tongue weight up to 350 pounds.
I attached an installation... view full answer...
We have a Reese Trunnion Bar Weight Distribution System, part # RP66540 that will handle a range of tongue weights between 200 and 600 lbs. When used with the optional Bolt On Weight Distribution Chain Hanger Kit, part # RP58305, this system would be exactly what you need. The brackets actually bolt to the side of the trailer, as seen in the photo. view full answer...
Go To Results