For your NuCamp Boondock XL, the best option available is the Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for R Pod Trailer Up to 16-1/2' Long # CA80198. With the Deluxe PolyPro III, you will have some extra room in the cover to accommodate your Yakima setup with the Slim Shady awning like the # Y56VR.
However, with the Yakima Rack and Slim Shady Awning, there is the potential for these accessories will stretch and damage the cover. The absolute safest option is to remove... view full answer...
There should be no issue adding brakes to your 2017 NuCamp T@G, but you will need to verify a few things, like weight capacities, wheel bolt pattern, and bearings, to make sure they will fit properly. With that being said, a few of these will be examples and again, will need to be verified before ordering. I did also include an article we have on adding brakes to a trailer for reference.
To start with, you will need to contact NuCamp with your VIN to see if they can tell you your bearing... view full answer...
Your best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry.
We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702. view full answer...
I have the perfect RV cover for your 2021 NuCamp TaG Travel Trailer!
The Classic Accessories PolyPro III Deluxe RV Cover for R-Pod Trailers # CA80198 will work great for your 2021 NuCamp TaG Travel Trailer. Doing some research it shows your trailer's exterior length is 13 foot 7 inches long. This cover fits R-pods from 13 foot 7 inches to 16 foot 6 inches long.
The cover is weather-resistant, has a 3-pply PolyPro top panel that eliminates interior buildup of condensation. The cover... view full answer...
The Maxtrax Flat Rack Mount for MKII Recovery Boards # MA32PR will work just fine with the Yakima LockNLoad platform rack.
These mounts will just slide into the top channels on the LockNLoad using the included t-bolts. view full answer...
Go To Results