The link didn't work but based on your description and the parts available for a 2023 Nissan Frontier I have listed the parts you will need below and added a couple of recommendations as well. I have also linked a couple of installation videos.
Draw-Tite Trailer Hitch Receiver item # 75282
T-One Vehicle Wiring Harness with 7-Way Trailer Connector item # 118266
Mounting Bracket and Installation Hardware item # PK12711U
Pollak 7 Pole to 4 Way Connector Adapter item # PK12716
You are... view full answer...
Yes it will. The Access TonnoSport Tonneau Cover item # A22030179 is compatible with a ladder rack and does fit the 5' bed of the 2019 Nissan Frontier.
For a ladder rack, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43001XT-603. This ladder rack attaches to your Frontier's stake pockets and mounts on top of the bed sides.
The Thule ladder rack system has a no drill installation and a 1,250 lbs capacity. The slotted crossbars accept a wide variety of accessories... view full answer...
The Karrier Wheel and Tire # AM32153 is the size ST205/75R14 mounted on a white wheel with a 5 on 4-1/2 inch bolt pattern that has an 81 mph speed rating. This would give you the larger size you are looking for as this will be a little over 2 inches taller. view full answer...
Yes, I was able to find your account and found that you purchased the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum # EM07705. This ladder rack has a maximum weight capacity of 800lbs. view full answer...
I spoke with my contact at Roadmaster and the ring on the Stowmaster tow bar, # RM-581, has an inner diameter of 2.5 inches and an outer diameter of 4.5 inches. I have included a picture showing these measurements. view full answer...
The etrailer hitch part # e98869 has a towing capacity of 5,000 lb total trailer weight and the weight of a 2004 Jeep Wrangler is between 3,200 and 3,700 lb so this hitch would easily have the capacity needed to flat tow it. Your Frontier has an even higher towing capacity of 6,200 to 6,700 so you'd easily have the capacity needed. view full answer...
I would be happy to! To add a hitch to your 2024 Nissan Frontier, I recommend the etrailer item # e98869. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight, which can be increased to 8,000 lbs and 800 lbs when used with a weight distribution system.
I really like the etrailer hitch item # e98869 because the crosstube mounts behind your rear bumper... view full answer...
To add a standard 4-way wiring harness to your 2002 Nissan Frontier XE, I recommend the Curt T-Connector Vehicle Wiring Harness item # C56FR. This custom-fit T-connector plugs into your Nissan's wiring harness, which is located under the vehicle behind the spare tire. It will allow you to control the lighting functions on your utility trailer.
If your utility trailer has brakes you will also need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes... view full answer...
Thanks for the picture! Yes, there are modifications required but all you will need to do to install the Draw-Tite item # 65075 on your 2022 Nissan Frontier is to remove the air damn or trim about 1/4 of it away. This piece will sit behind the hitch once installed so if you just trim it you won't be able to tell it was modified. The hitch does indeed mount below your front license plate holder. This hitch has a 2" receiver with a 500 lbs vertical load limit so it will work great with a... view full answer...
The Fastway e2 Weight Distribution Hitch # FA92-00-0600 weighs 74 lbs. This system has a tongue weight capacity of 250 lbs - 600 lbs and uses spring bars which create friction within their brackets to help control trailer sway. view full answer...
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs # AMSC2 is 3/4" thick where the ball mounts to the ball mount as shown in the included diagram. view full answer...
The center hole diameter of the brake assembly set part # AKEBRK-35R-SA that you referenced is 3 inches and the distance between the holes vertically and horizontally is 2-7/8 inches. view full answer...
It's hard to say exactly, but typically Halogen bulbs like the Putco PURE High-Performance 9007 Halogen Headlight Bulbs # P239007MW that you referenced will last around 2,000 to 2,500 hours. view full answer...
The length of the Access Custom Truck Bed Mat - Snap-In Bed Floor Cover # A25030179 at wheel wells of your 2019 Nissan Frontier is 33-1/4 inches. With the Access cover, I confirmed that there could be some trimming required at the corners of the mat with your sprayed-in liner. As far as the BedRug Custom Truck Bed Mat # BMN05CCD, I measured that in-house and it is 42 inches between the wheel wells and 56-3/4 inches at the widest section. With these two different fitments, I recommend the... view full answer...
I had our warehouse measure the RV Hand Pump Water Faucet # 37297025 you referenced and from the bottom of the of the chrome mounting plate to the highest part of the unit is 6".
I included a diagram of this measurement for you to take a look at. view full answer...
The Draw-Tite front-mount hitch # 65075 is a confirmed fit on your 2017 Nissan Frontier. From the tops of the frame brackets that contact the frame down to the bottom of the receiver tube the dimension is 6-inches according to my Draw-Tite contact. The bottoms of the frame brackets do extend approximately 1-inch below the bottom of the receiver so overall the hitch will be approximately 7-inches below the bottom of the frame rails.
Passenger and cargo load, as well as your specific tire... view full answer...
I contacted Thule, and they informed me that the Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks # 8523159001 has a length of 66.7mm, a width of 476mm, and a height of 88.9mm. view full answer...
I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item # C56225. This includes the necessary relays that Nissan leaves out when building their trucks. However, it does also include the wiring harness. We don't sell the relays separately and I wasn't able to find them online without the harness unless you go through a Nissan dealer.
I have linked an installation video below to... view full answer...