bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Monaco


  • Replacement Gear Pack for Slide-Out on 2002 Monaco Dynasty Trailer
  • We do have a nice selection of replacement slide-out gear packs available from Lippert. I wasn't able to verify the type of slide-out you have on your 2002 Monaco Dynasty Trailer, so you will want to try and verify that it is in fact manufacturered by Lippert and then simply match up the gear pack to the tubing size the room slides on. For 2 x 2 inch tubing you will use # LC281331 for a replacement gear pack. There is also a 2-1/2 x 2-1/2 inch tubing option # LC123356 for the heavy duty...
    view full answer...

  • Replacement Monitor For Zone Defense Camera Monitor On a 2011 Monaco Diplomat 43DFT
  • Based on the information I could find it appears the Zone Defense monitor on your 2011 Monaco Diplomat RV motorhome connects to 4-pin cameras. This would require the Buyers Products RV Backup Camera System # 3378883010 as the Rear View Safety System # RVS-6139Q you found connects to 5 pin cameras.
    view full answer...

  • Replacement Kwikee Step for 2004 Monaco Dynasty
  • The replacement step you need for your 2004 Monaco Dynasty is the Lippert Components Kwikee 35 Series Single Electric Step # LC3691462 based on the number you gave. Let me know if you have any further questions.
    view full answer...

  • Replacement Kwikee 909506000 Controle Module
  • I spoke with my contact at Lippert regarding your older Kwikee step assembly with the 909506000 control module. He stated that in order to replace the control unit all you need is the part # LC379606. This is designed for pre-IMGL step units like yours that were manufactured between 1999 and 2005. You do not need to replace any other components.
    view full answer...

  • Replacement Step for 2001 Monaco Signature Series 40 Foot Motorhome
  • The Lippert Kwikee 38 Series Electric Step - 1 Step - 4" Drop/Rise - 24" Wide - 300 lbs # LC3723383 are the replacement for the original 38 Kwikee steps you mentioned. You will just want to confirm the step dimensions of 24 by 10-3/4 inches and the mounting dimensions of 25-3/4 wide by 5-3/4 tall by 11-3/8 inches deep.
    view full answer...

  • Replacement Fan and Motor for Create-A-Breeze Fan-Tastic Vent Fan
  • It sounds like you might have a Create-A-Breeze B8100 model fan, which is a Fantastic Vent series fan. The correct replacement for the fan and motor on 8000 series units is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 you were looking at. If you can provide a photo of the spec sticker with your model number or the motor part number I can confirm this for you.
    view full answer...