Expert Answers about Monaco
- Correct Steering Stabilizer for 2008 Monaco La Palma XL
- It looks like the 2008 Monaco La Palma XL was built on a Roadmaster Chassis so if this is what you have then you'd need the Roadmaster Exact Center Steering Stabilizer part # RM75RR which comes with both the steering stabilizer as well as the bolt-on mounting brackets. This will be an excellent upgrade for your motorhome allowing the steering wheel to return to center much faster and easier.
view full answer... - Available Sliding Cargo Compartment Storage Trays for RVs
- We do not offer the MorRyde brand but we do have sliding cargo storage trays for RVs, including part # LC370782 that you referenced. These are available in a range of sizes and you can see all of them by clicking on the linked page.
view full answer... - Replacement Fan and Motor for Create-A-Breeze Fan-Tastic Vent Fan
- It sounds like you might have a Create-A-Breeze B8100 model fan, which is a Fantastic Vent series fan. The correct replacement for the fan and motor on 8000 series units is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 you were looking at.
If you can provide a photo of the spec sticker with your model number or the motor part number I can confirm this for you.
view full answer... - Will Roadmaster Reflex Steering Stabilizer RM-RBK6-RSSA Fit 2011 Monaco Knight Motorhome
- If the Spicer front axle has air bags then yes the Roadmaster Reflex Steering Stabilizer part # RM-RBK6-RSSA that you referenced will fit. If you do not have the air bags then this kit will not work.
view full answer... - Replacement Shroud For Dometic 630035.331 Air Conditioner
- I was able to verify the correct replacement shroud for your Dometic 630035.331 air conditioner, which is the following part number:
- Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006
view full answer... - Replacement Kwikee Step for 2004 Monaco Dynasty
- The replacement step you need for your 2004 Monaco Dynasty is the Lippert Components Kwikee 35 Series Single Electric Step # LC3691462 based on the number you gave. Let me know if you have any further questions.
view full answer... - How to Install a 6-Way Trailer Connector To Front of Flat Towed Vehicle
- It appears you are connecting your tow vehicle wiring to a 6-way connection like the RoadMaster 6-Wire Flexo-Coil Kit # RM-146. Making these connections is not difficult and I've attached a video and photo as well as linked an article to assist with these connections.
You won't use the blue brake controller output location, but I do recommend connecting the 12V power using the Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 to maintain your battery while towing.
view full answer... - Size of Tubing on Stromberg Carlson RV Exterior Ladder # LA-401
- The tubing on the aluminum uprights for the Stromberg Carlson RV Exterior Ladder # LA-401 that you referenced features an outer diameter of exactly 1 inch. I have attached a short video demonstration that you can also check out.
view full answer... - Is The Valterra Shower Drain Compatible With PVC Threads?
- The threads themselves on the Valterra Shower Drain # A01-2012VP are not made from PVC however this drain is compatible with ABS plastic and PVC.
This drain has a 2-1/2" stainless steel flange, and will fit into a 1-3/4" drain hole and 1-1/2" P-traps.
view full answer... - Which Tow Bar Cover for the Blue Ox Avail BX7420 Tow Bar
- The correct cover for your Blue Ox Avail tow bar # BX7420 is the Blue Ox Tow Bar Cover - Ascent and Avail # BX88309. The cost of this item is available on the product page, which can be accessed by clicking on the part number link.
view full answer... - Steering Stabilizer for a 2009 Monaco Safari Cheetah on Roadmaster Chassis
- I checked with Roadmaster Inc., manufacturer of the steering stabilizer and not the chassis, and found that for the 2009 Roadmaster Monaco chassis the correct steering stabilizer is # RM-RBK6-RSSA.
view full answer... - Replacement Step for 2001 Monaco Signature Series 40 Foot Motorhome
- The Lippert Kwikee 38 Series Electric Step - 1 Step - 4" Drop/Rise - 24" Wide - 300 lbs # LC3723383 are the replacement for the original 38 Kwikee steps you mentioned. You will just want to confirm the step dimensions of 24 by 10-3/4 inches and the mounting dimensions of 25-3/4 wide by 5-3/4 tall by 11-3/8 inches deep.
view full answer... - Replacement Kwikee 909506000 Controle Module
- I spoke with my contact at Lippert regarding your older Kwikee step assembly with the 909506000 control module. He stated that in order to replace the control unit all you need is the part # LC379606. This is designed for pre-IMGL step units like yours that were manufactured between 1999 and 2005. You do not need to replace any other components.
view full answer... - Etrailer Preferred Parts to Flat Tow a 2015 Jeep Wrangler Unlimited
- I believe I have found the helpful article section you are referring to and have attached a link towards the bottom of this answer page.
For your 2015 Jeep Wrangler Unlimited the Etrailer Preferred parts are the following:
Roadmaster Base Plate Kit - # RM-521448-5
Roadmaster Nighthawk All Terrain - # RM-676
Hopkins Custom Tail Light Wiring - # HM56200 (cut off 4-Way connector and wire to tow bar connector)
Air Force One - # SM99243
Tow Bar Cover - # RM-055-3
Brake-Lite Relay Kit - # RM-88400
Tow...
view full answer... - Can 7-Way Trailer Plug be Wired with Separate Brake Light Circuit
- There isn't a standard way to wire up a 7-way like part # PK12706 with a separate stoplight, but the center pin is typically an auxiliary or reverse light circuit that you could use as the stoplight if no reverse light is needed.
view full answer... - Clamps to Mount Vertical Sunscreen to RV Awning
- The Valterra Awning Buddy # A30-0300 is a set of two rubberized clamps intended to tighten a sagging awning or to prevent one from flapping in the breeze, but they also sound like they'd be perfect for your similar application to secure a vertical sunscreen to the same awning structure.
I expect that you would need a total of at least 4 clamps (so that means two complete kits) for the top of a 10-foot screen but more may be needed depending on the weight of that screen material. You will...
view full answer... - Availability of Replacement B Linkage for Lippert Kwikee 28 Step for Motorhome
- We do have the linkage kit that matches what you said you have as part # LC379648. This is the Kwikee Electric Step "B" Linkage Repair Kit is designed for series 28, 29, 31 and 39 Kwikee electric steps. The kit comes complete with everything but the step and step frame. This is Kwikee part number 909533000. I attached a picture of what this looks like installed for you to check out and compare to what you have.
The Lippert Components Kwikee 28 # LC3747453 that you referenced would be...
view full answer... - Can I Control the Heat Strip on Advent ACM150 Unit with Carrier Air V Controller
- It sounds like you're trying to control the heat pump on your Advent # ACM150 with your existing thermostat, which is not possible, but I do have a solution for you. The Carrier remote does not have a heat function on it, so there's no way for your existing unit to control the heat function.
The Electric Heat Strip for Advent Air Conditioners # ACMHD can only be operated with the Air Distribution Box w/ Built-In Thermostat for Advent Air RV Air Conditioners - White # ACDB (non ducted only)...
view full answer... - Recommended Steering Stabilizer for 2013 Monaco Knight RV
- Based on my research, it looks like your new 2013 Monaco Knight RV is built on a Roadmaster Monaco chassis. I do recommend verifying this as it's possible you have a different submodel.
If this is the case, I do have a solution for you, however your existing Roadmaster RBK9-RSSA Steering Stabilizer will not fit your new motorhome. This particular stabilizer is designed only to fit certain model Ford chassis RVs, which is why it worked so well on your Thor Ace RV.
For your Monaco Knight,...
view full answer... - Troubleshooting Kwikee RV Electric Steps That Will Not Stay Out
- Did replacing your controller solve the issue temporarily or were the steps still closing when the door is shut? If there was no change the control module isn't the cause of the issue. Typically a bad ground connection can cause steps like these to act out but I know we've talked about this in the previous question you asked so I'm assuming you already checked yours and it's still giving you problems.
From there it could honestly be the lock out switch. The internal contacts of the switch...
view full answer...
Go To Results