Sounds like you need the Replacement Bent Towing Receiver, part # SP325 for your Swagman Traveler XCS, part # S64664.
The # SP325 fits over 2 inch square ball mounts and includes the mounting hardware. view full answer...
What you could use to raise up the Flint Hill Goods Cargo Carrier part # FHG77ZR that you have is the Curt Multipurpose ball mount # D210 which will give you additional vertical height and would be rated for the weight of your scooter and the carrier. view full answer...
We do not have any conversion kits, but the Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 4" x 6" - Aluminum - High Beam # HLL79HB-2 according to the manufacturer is a 2 prong setup that should be compatible. It has a green wire that goes to ground and a red wire that goes to power. view full answer...
Yes, the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle # K71-652-00 is the perfect replacement for your # TREQ356 equalizers. These are actually compatible as a replacement for equalizers that measure between 5-1/4" and 6-1/4" between the horizontal bolt hole centers (see attached photo). This equalizer has a vertical bolt hole distance that is 1/4" shorter than your current application but that is acceptable for this application. view full answer...
Yes, the Replacement Key # GL49FR will work on your EF320 lock cylinders. The key fits FIC 320 lock cylinders with HF, EF and CF codes. view full answer...
I spoke with my contact at Dexter regarding the axle on your 2000 Four Star Trailer. Using the serial number that you provided (thank you!) she was able to verify that this is a Torflex 3,500 pound axle. The spindle uses the # L68149 inner bearing and # L44649 outer bearing.
There are a few possible bolt patterns that could be on your hubs, so you will just need to find a hub and drum assembly that matches your existing bolt pattern. If you are unsure what this is, I have attached a great... view full answer...
I do see the etrailer Trailer Hitch Receiver # e98902 you purchased for your 2020 Mazda CX-5 will also fit your new 2023 Mazda CX-5. The Replacement Hardware Kit # RHK will provide you with new hardware for the this receiver. Be sure to enter this hitch number when ordering the hardware kit to ensure you get the correct hardware. You will find the instructions for the receiver linked below. view full answer...
Great choice on the Kuat Beta # B202-2!
To keep the front tire stable you can use any kind of strap really. The Snap-Loc Cam Buckle Cinch Strap # SLTC103CR is a simple solution or I've even used a bungee cord before - it doesn't have to be anything fancy. view full answer...
You are correct that the process of removing old grease seals can distort their shape and make it tougher to measure their inner and outer diameters. Part numbers from the originals are the preferred way to find replacement parts but the other option is to measure your spindles at the various points where the seal and bearings ride. The linked diagram shows you these points on the spindle that you can measure with your digital caliper. This is more reliable than measuring the old parts... view full answer...
You will need to order the Replacement Hardware Kit # RHK and in the box labeled Hitch Item Number you will need to put the Draw-Tite Trailer Hitch Receiver # 76138. view full answer...
We do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 this is the clip and the contact pad for the Yakima roof rack systems and will come with two 130 clips and the appropriate pads.
I do not have them available seperately. view full answer...
Though we do have K-Source replacement driver side mirrors (Heated/Electric # KS66048M and Electric # KS66046M), they currently do not offer just the replacement glass at this time. With that said, if you already have the glass and are just needing to get it installed, it looks like you may need to pop the back panel off the mirror housing. I included an image of what I mean by this as well.
If you do not already have the glass, the only option we will have is to replace the whole mirror.... view full answer...
I have good news for you! This particular Yakima Replacement Sleeve # Y8890342 will work with your Yakima HighLite2. It was only the Yakima DoubleDown hanging racks that were made before 2014 that will not work with this adapter. view full answer...
I spoke with my Yakima contact, and was unfortunately told that the 8890230 adapter sleeve is no longer available, but the # Y8890342 which is still available will work. view full answer...
The hand knobs which secure the ramp to the etrailer Motorcycle Carrier part # e98873 are M10 bolts per the instructions. I don't have the exact specs further than that unfortunately but a trip into the hardware store should have what you need. view full answer...
The Replacement Bolts for Thule Fit Kit for Podium Style Foot Pack # 7524498001 are not the same style of bolts needed to secure a Thule roof rack to your 2021 Mazda CX-5 flush rails.
I took a look at the instructions for 183160 fit kit designed for your vehicle and it looks like the correct replacement bolt is part 50435 but since this fit kit has been discontinued (as of May 2023) this isn't a part that's readily available.
I imagine Thule will eventually come back out with a fit kit... view full answer...