I spoke with my contact at Westin and they told me the Westin Trailblazer Rear Bumper, part # 42-3005 weighs 50 lbs. This features 2 inch steel tubing and has a 2 inch by 2 inch receiver opening.
You will want to check your owners manual or with the dealership to make certain you do not exceed the manufacturers suggested towing weight capacity for your vehicle. view full answer...
The mounting bolts that secure the Draw-Tite # 75193 to the side of your 1999 Jeeps TJ's frame will be 1/2-13 x 1.75 Grade 5 bolts. As a side note, the bolts that are secured to the bottom of the frame can vary. These will either be 7/16-14 x 1.50 bolts or M12 x 1.75 x 40mm bolts. Due to this, the # 75193 will come with both sizes.
I included an install video we did on a 1999 Jeep for you to check out as well. view full answer...
I spoke with Hopkins and they confirmed that the Brake Buddy Stealth # HM39530 can only be used with the included brake controller. view full answer...
According to my contact at Bestop, their 2-piece Mirror Set # B5126201 for the 2000 Jeep Wrangler TJ has flat mirror surfaces. These are a correct fit for your 2000 TJ with OE half-doors. view full answer...
I have attached a helpful article that explains what lights are needed for trailers. Putting lights on a trailer are based on the width, length, and Gross Vehicle Weight Rating (GVWR). To find the GVWR you can look on the trailer tongue or frame for a sticker or tag that lists the rating. Here is a list of the lights and markers required for your trailer if it has a GVWR less than 10,000 lbs. Each of the items list their features and sizes that you can use to determine what you want to... view full answer...