The hitches for the 2017 and 2018 Jeep Grand Cherokee will be the same fit. The Curt Hitch # C13182 will be a great fit for your Grand Cherokee.
If you plan on using your hitch to haul a trailer, you will need a trailer wiring kit. If your Jeep is equipped with a factory tow package you can use # 118384. If it is not, you will need # 118727. view full answer...
We have a really nice selection of rear cargo mats specially designed for your 2004 Jeep Wrangler, which I have linked below. I specifically recommend the custom replacement liners like the BedRug # BTTJ97R or the carpeted # BRTJ97R that will allow you to restore the floorboards of your Jeep while providing an easy-to-clean, waterproof liner that will do a great job of protecting the interior. view full answer...
Since you said you want the best and lightest weight tow bar for your flat towing setup the Roadmaster Nighthawk part # RM-676 is the way to go. It's about 20 lbs lighter than the competition, is very easy to use, and comes with safety cables and and an umbilical wire kit.
The correct base plate kit you'll want that fits your 2016 Jeep Wrangler and this tow bar is the Direct Connect kit part # 1444-3.
Since we don't have any plug and play tow bar lighting kits the best option is the... view full answer...
The Draw-Tite Trailer Hitch Receiver # DR64FR you were looking at will not fit for your 2020 Jeep Gladiator Rubicon due to your vehicle having the supports welded on to the bumper that block the hitch from being able to contact the frame of your vehicle.
Due to this you will need to go with the Curt # CU74FR instead as it mounts in a different way which allows it to work with these supports.
If you will be towing a trailer with your Gladiator you will also need a vehicle wiring harness... view full answer...
The T-nuts of the Yakima Landing Pad 1 part # Y00221 are big enough to fit into the opening of the Rhino Rack RTC Tracks # RTC14 without requiring you to remove the end caps. view full answer...
The actual length of the Adco SFS AquaShed RV Cover for Toy Hauler Travel Trailer, # 290-52272 is 294" (24'-6"). Simply use the cinch ropes at front and rear of cover to remove slack and reduce billowing. The weighted straps with buckles secure cover under vehicle to prevent the cover from blowing off. view full answer...
Basically all of the roof racks aside from the ones offered by Thule have been rated for 165 lbs for your 2019 Jeep Compass. Since you'll be going off-road I recommend going with the Yakima roof rack system that utilizes HD bars:
Yakima 55" HD Crossbars - # Y01156
SkyLine Towers - # Y53TR
HD Bar SL Adapter - # Y03541
Landing Pad 19 - # Y00245 (these mount to the sides of your raised rails as opposed to inside an opening like what you mentioned)
This roof rack is on the higher-end when... view full answer...
The Redarc Tow Pro Liberty # RED24FR does not have the ability to function in the manner that you're seeking but the Tow Pro Elite # RED44FR does with its user controlled mode-which is what the knob is used for. The Tow Pro Elite gives you the best of both worlds in terms of providing you with the proportional braking that's easy to use and applies the trailer brakes in proportion to the deceleration of the tow vehicle and the user controlled braking mode; the Tow Pro Liberty will only... view full answer...
We do have replacement base pins and clips for your Roadmaster Nighthawk Tow Bar # RM-676; the correct replacement pins are the following:
- Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars # RM-910029 view full answer...
Thanks for the information!
Based on the numbers stamped on your AL-KO brakes you have 10" x 2-1/2" braking assemblies, but that is not a size carried any longer. The closest option would be the Dexter Electric Trailer Brake Kit w/ Parking Brakes # K23-086-087-00 which measure 10" x 2-1/4" and have the parking brake assemblies you like you need. You will however need to confirm that the brake mounting flange on your axle has a bolt pattern that measures 2-7/8" apart, and 4" apart diagonally... view full answer...
The distance between the inside points on the Roadmaster Direct-Connect Base Plate Kit, # RM24VR, is 24" center-to-center. Please note the attached drawing. view full answer...
The Thule Helium Pro # TH9043PRO will work with your 2021 Jeep Wrangler, but the spare tire may cause an issue. You could get this swing away adapter # SAR36VR which will allow you to swing the rack away when you're trying to access the back of your jeep. This is a PERFECT product for Jeep owners. The Thule Helium seems to fit a stock tire on a Wrangler but if you've already upgraded wheels/tires then you may need the swing away adapter. view full answer...
The custom mounts for the Detail K2 Rampage II Elite Snowplow # K2RAMP8219ELT have to be purchased separately. For your 2009 Jeep Wrangler, the part you need is the Custom Mounting Brackets for Detail K2 Snowplows # K284219. view full answer...
The first thing you need to flat tow your 2021 Jeep Cherokee Trailhawk is a base plate kit confirmed to fit the vehicle like the easy to use Roadmaster Direct Connect kit part # RM-521451-5 which I attached an install video for.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the... view full answer...
Yes the Curt Echo Mobile brake controller # C51180 is perfectly compatible with the Tuson Asymmetric Sway Control # 335TSC-1000 that you referenced. view full answer...
The Universal Installation Kit # ETBC7 will allow you to connect to the 4-way flat connector on your 2017 Jeep Wrangler Unlimited Rubicon. It provides the wiring needed to install a charge line and Redarc Tow-Pro Liberty Brake Controller # RED52VR. I prefer the Redarc in the small compartment of your Jeep as you will be able to mount the small control knob where it is easy to reach and will not take up as much room on your dash as a larger Controller # 90195. view full answer...
The Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at Roadmaster he confirmed that we need to go with a different tail light kit for your setup.
I recommend the Universal Hy-Power Diode Wiring Kit # RM-154 if the brake and turn signal are combined on your 1999 Jeep Cherokee Sport, or the Universal Wiring... view full answer...
The center-to-center measurement for the T-Slots on the Yakima LockNLoad Platform Rack # Y05044-39 is 5" (see attached).
Attached is a review video for you to check out! view full answer...
For your 2021 Jeep Wrangler Unlimited Rubicon 4x4 with the diesel engine, factory steel bumper and warn winch the Roadmaster Crossbar-Style Base Plate Kit # RM84VR and Roadmaster Direct-Connect Base Plate Kit # RM24VR are the only baseplates that are confirmed to fit. If you already have a set of tow bars you are using let me know and I will find you the correct adapter, otherwise the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 is the one I recommend. This will work directly... view full answer...