The height from the ground to the top of the seat on the Dometic Full-Timer Boat and RV Toilet w/ Sprayer # DOM29FR is approximately 18" view full answer...
I would be happy to help!
The Valterra RV Toilet Gasket # Q23653VP you were looking at measures 4-3/4" wide x .770" tall with an inside diameter of 3-1/4" which you can see in the included diagram.
This is standard for RV toilets so it should be exactly what your Thetford toilet uses. view full answer...
The minimum distance required from the center flange mounting bolts to the wall is 11 inches in order to install the Full-Timer toilet, which is available in two different colors:
- Tan Ceramic: Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl # DOM27FR
- White Ceramic: Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl # DOM87FR
These toilets do indeed come with the flange bolts as well as the flange gasket. I have added some links below to video reviews... view full answer...
While we don't have anything for an RV toilet that would be considered bariatric. The Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic # DOM87FR has a capacity of 400-lbs. This would be the largest capacity toilet that is currently available from Dometic. view full answer...
The distance from the toilet seat, to the hump on the back of the Dometic 321 Full-Timer RV Toilet # DOM99FR is approximately 5".
The center of the flange bolts to the edge of the toilet is 16.9", and the entire length from the back flange to the front of the toilet seat is 22".
Attached is a diagram for you to check out as well. view full answer...
Yes, a hand sprayer can be added. You will want to use the Hand Sprayer Installation Kit for Dometic RV Toilets item # DOM75FR. I spoke to Dometic and this is confirmed to fit your Dometic 320 Full-Timer RV Toilet item # DOM87FR. view full answer...
The distance from the back of the toilet to the center of the bolt holes that secure the Dometic Part-Timer RV Toilet # DOM37FR is 14-3/4 inches. The center of the bolts is inline with the center of the toilet like what you see in the dimensional drawing I attached. view full answer...
The Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic Item # DOM87FR seat hole has a distance from front to back of 12" and side to side of 8" which falls right between a standard round bowl seat and an elongated seat so you'll feel like you're sitting on the toilet at home using this model. view full answer...
The lid for the Replacement Wooden Toilet Seat # DOM83FR that fits on a Dometic 310 RV Toilet # DOM57FR tapers to be narrower at the top of the lid. So it will be slightly narrower than the seat itself. I have included dimensions that show the widest points of the seat. view full answer...
The Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic # DOM87FR has a capacity of 400-lbs. This would be the largest capacity toilet that is currently available from Dometic; this is the same size as a full household toilet. For installation you will need 11" from the wall to center of mounting bolts in order for the bowl to sit in the correct spot over the hole in the floor. view full answer...
That's a good question, and it is specifically the lid that closes slowly on the Dometic RV Toilet Seat # DOM23FR.
The seat will still close at "normal" speed, if you will. This seat and lid is a replacement for a Dometic 310 or 311 Series RV toilet. I have added a link to a video review for you to check out as well of the Dometic RV Toilet Seat # DOM23FR. view full answer...
I reached out to Valterra for the dimensions of the Valterra RV Toilet Floor Gasket with Hold Down Bolts # Q23653VP, and they sent me the accompanying dimensional diagram.
It has an outer diameter of 4-3/4", an inner diameter of 3-1/4" and has a total height of just over 3/4". It is designed to be used with Replacement RV Toilet Floor Flange - 3" MPT # T05-0782 or Replacement RV Toilet Floor Flange - 3" FPT # T05-0784. view full answer...
The Standard Height models from Dometic are the tallest versions we carry and would be the same as a residential toilet. I've attached a dimensional diagram of the Dometic 320 Full-Timer RV Toilet # DOM87FR you were looking at to give you a better idea of what you'd be getting. view full answer...
From the furthest point on the back of the Dometic 320 Full-Timer RV Toilet # DOM87FR to the center of the flange bolt hole is 10-3/4". If you only had 11" from the wall to the flange bolts then you would only have a 1/4" of space between the toilet and the wall. view full answer...
I went out to our lot and found an RV with the Replacement Wooden Toilet Seat and Lid for Dometic Full-Timer RV and Sealand Toilets item # DOM25FR and took some measurements. The inside dimensions of the seat are 8-1/4" x 10-7/8". I have attached a diagram. view full answer...
The Dometic 311 Part-Timer RV Toilet - Low Profile - Round Bowl - Slow Close Lid - White Ceramic Item # DOM67FR that you referenced has a weight capacity of 400 lbs. view full answer...
In order for the Dometic Full-Timer RV Toilets like part # DOM99FR to function properly you will need at least 10-1/2" from the wall to the center of the mounting stud. view full answer...
The rear piece of the toilet sits just above the seat and seat cover so the overall height listed is from the ground to the top of this piece. The Dometic 311 Part-Timer RV Toilet - Low Profile - Round Bowl - Slow Close Lid - White Ceramic # DOM67FR, pictured below, has an overall height of 15.5" with the seat sitting approximately at 14" tall.
The Dometic 310 Part-Timer RV Toilet - Standard Height - Round Bowl - Slow Close Lid - White Ceramic # DOM57FR has an overall height of 20" with... view full answer...