Yes, the RV interior light part # 328-001-902XPW that you referenced is the standard style of RV interior light you are referring to. The most similar light we have to it is the part # RVIL22. view full answer...
We offer quite a few different interior light switches like the Single RV Switch # 37213435, and RV LED Light Side-Slide Dimmer Switch # 37205-12325.
I included a link to all of the interior light switches we offer for you to take a look at. view full answer...
I recommend the 1141 LED Bulb - Single Contact Bayonet - 360 Degree - 2.4 Watt # DI85VR for your RV's interior lights. This will give you 360 degree lights with a white color that is preferable for interior lighting in most cases. The brightness of this bulb is comparable with a lumen output of 210 to an incandescent bulb and is dimmable. view full answer...
The Optronics LED RV Interior Light with Switch - 9 Diode - Surface Mount - White Housing # RVILL33 does not have a replacement lens available. The pricepoint makes the entire unit a very affordable replacement part. view full answer...
The RV Euro Style Interior Single Ceiling Light # RVIL21 would be an excellent choice for you. The bulb style that is in this unit is a 921 bulb. The correct LED replacement bulb would be the # DI68VR. This has a warm white color that would be great in the interior of your RV. view full answer...
The Gustafson RV Interior Light part # 277-000330-331 is 12 volt DC since it's intended for an RV application. If you need AC power your best option would be to look at standard interior lighting. view full answer...
The Bargman 89-Series Interior RV light 30-89-007 is a 12V square incandescent ceiling light with a switch and that measures approximately 6 1/ 4 x 5 1/2 x 1 3/4-inches. We do not have this particular light but we do offer a wide range of RV interior lights and some are close to this light's dimensions. Others that are larger give you the opportunity to upgrade your interior lighting.
For example we offer the Gustafson RV Pancake Light # 277-000340 which has high-efficiency LEDs instead... view full answer...
I'd imagine that your interior lights are currently powered by either AC or DC power and when the camper switches from 120 AC to 12 DC there is actually a converter in play that keeps the power source the same voltage for your lights as this is a common setup.
If the lights you have currently are 12 volt then the Optronics LED RV Interior Light with Switch # RVILL34 would work well as a replacement. Nearly all campers use 12 volt lighting like this. view full answer...
The Gustafson RV Pancake Light, Item # 277-000340, has three settings: off, one light, both lights. Based on my research, dimming the lights is not an option. How many lights you need would depend on how much light you want in your van interior. I recommend going with 3-4 lights depending on your needs.
Contact us if you have any other questions. view full answer...
Yes, the LED panels are included with the Optronics LED RV Interior Light with Switch # RVILL34. They are also already installed so all you need to do is wire up the assembly and you'll be ready to use it. view full answer...
The Optronics RV Interior Double Dome Light with Switch # RVIL22 should be a good replacement for your Bargman RV light that starts with 30-93, although it is not an exact match in terms of size.
It is similar though, with the Optronics measuring 12" long x 4-1/4" tall x 1-13/16" thick and based on my research the Bargman is 11-1/2" x 4-7/16" x 1-3/4" so unless there is a reason the different sizes will not allow you to install the Optronics light it should work for you.
I have added... view full answer...
I spoke with my contact at Command regarding the LED RV Interior Light # 328-K-1050Q9 referenced in your question. The LED unit has a draw of 0.26 amps.
I have attached a short video demonstration for this light that you can also take a look at. view full answer...
The LED RV Interior Light, # ILL31CB, would have to be wired to a switch to turn off an on. If the old lights were wired to a separate switch, like on the wall, this light would wire in the same way. If you needed a switch, you could use something like # BL0108-00. Power from the trailer would go in to a terminal on the switch and the power wire to the light would also connect to the switch. view full answer...
The Optronics LED RV Interior Light # ILL31CB could work well for you as a replacement light. I have attached the dimensions of this light for you. You can measure your existing light to see if the ILL31CB has comparable measurements. This light will need to be connected to a switch in order to turn it off and on.
Another great option, and the light I recommend, is the Optronics LED RV Interior Light with Switch # RVILL33. This light will allow you to turn the light on and off by a switch... view full answer...
While the Optronics Opti-Brite RV Interior Strip Light w/ Switch # ILL70CBSBAWN referenced in your question has a sealed, waterproof construction, it is designed primarily for interior use or as a porch light on a covered porch. It is not necessarily built to withstand heavy rain and harsh weather.
A porch light like the Optronics RV Rectangular Porch and Utility Light # RVPL1C, which is specifically designed to be an exterior light, might be a better option. This light features a molded... view full answer...
We have many different LED lights for the interior of an enclosed trailer, though I'm not 100 percent sure what you are referring to by shop-type lights. But we have lights such as the Opti-Brite LED RV Dome Light # ILL10CCB and Gustafson 12V RV LED Puck Light # 277-000489.
I have added a link below to our entire selection of LED lights for the interior of an enclosed trailer. view full answer...
Hi Ronda,
We offer a small selection of recessed lighting for RV interiors. If you'd like to send me some pictures of the light you're wanting to replace I can try to see if we have a similar offering. view full answer...