I reached out to our contact at Redline and he informed me that the Front/Center/Rear Hanger # E4139 is rated for axles ratings up to 7,000lbs. So you will be able to use these on your 2019 Grand Design Reflection 5th wheel. view full answer...
I am not sure how you are measuring the amps draw of the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 but it sounds like you might actually be seeing the milliamp draw instead of the amp draw. Which 74 milliamps is .074 amps and 133 milliamps is .133 amps which would be about right for just turning the unit on. view full answer...
The weight of 1 of the Stromberg Carlson Base Pad Extreme for RVs and Trailers # SC33VR is approximately 4.5 lbs.
If you were wanting to know the weight capacity, it is 6,000 lbs. individually or 3,500 lbs. when 2 are stacked together. view full answer...
The trailer wheel part # LHSL311 was designed to be used with a standard center cap like the part # 425EZ. I am not totally sure what type of wheel you are looking for but if you could get me the size, bolt pattern, and a picture of it I can see what the closest match would be. view full answer...
I confirmed with Yakima that the maximum overall weight capacity of the LongHaul 4 Bike RV Rack # Y02476 is 150 pounds. However, it is important to note that you should not exceed the per-bike weight capacity of 37.5 pounds on the Range 4. For example, if you wanted to load a single bike that weighs 40 pounds on the rack, the rack cannot support that bike even though it falls under the overall weight capacity of 150 pounds.
If you are planning on using women's bikes, children's bikes,... view full answer...
The standard diameter for trailer leaf spring bolts is 9/16 inch which is why the part # E4139 and all similar options have this hole size. We don't have anything with a smaller diameter but my guess is what you have is actually 9/16 inch. view full answer...
I consider the Hollywood Racks RV Rider Bike Rack item # HLY64FR a pretty easy rack to install and remove from a hitch receiver but I can't speak to your experience to say for sure. One of the main issues you will have is the weight of the rack itself as it weighs 77 lbs. You said we, so I assume you'll have someone to help you get the rack on and off the receiver which is what I recommend for people with concerns like yours. The second person can help line up the shank with the receiver... view full answer...
We do!
I recommend going with the Aluminum Viking Series Valhalla Trailer Wheel # TA75FR which is compatible with up to 100 psi but you'll need to swap out the rubber valve stem (only rated for up to 80 psi) to the Americana Metal, Bolt-In Valve Stem # AM20906.
The metal valve stem can handle up to 200 psi so you can be confident in the performance and safety of this wheel and valve stem setup. view full answer...
The sticker on the Dexstar Steel Mini Mod Trailer Wheel # AM20742 has it rated for 3,520 lbs so it will work great for your application! view full answer...
We do not currently have a dimensional drawing of the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1716 - 16,000 lbs Item # RP94716-61301 on a Ford F-350 however, a 2017 Ford F-350 inside bed height is 21.1" and inside bed width of 66.9". From the bottom of the trailer nose to the bottom of the pin box where the ball inserts is approximately 27.64". With an inside bed height of 21.1", that leaves you with approximately 6.54" of clearance from the top of the... view full answer...
Those are nice bikes and you will definitely need an adapter bar with that deep of a step thru frame. You will want to use two of the Swagman Bike Frame Adapter Bar item # 64005. You can disregard the 35 lbs weight limit. Your e-bikes will just be held in place by the bar, so you won't be putting all the weight on the adapter bar like you would if this was a hanging rack. They fit bikes with a 22-1/2" - 30" gap between the handle bars and seat posts.
The Swagman E-Spec Bike Rack for 2... view full answer...