For the # PSEA20000340 Pro Series A-Frame Trailer Jack you referenced, you'd use the # PS1400700340 foot plate. If you click the provided links, you can see product description videos for both the jack and the foot plate. view full answer...
Yes. The 16K Reese 5th Wheel hitch will fit in your 2006 GMC Silverado 3500 with 8 foot bed. But a slider 5th wheel is not necessary for an 8 foot bed ,it can still be used of course! You can lock it in place if you wanted with Pull Pin Lock Plates, # RP58093.
You will need to install Fifth Wheel Trailer Hitch Custom Installation Kit with Brackets and Rails, # RP50064-58, if you do not already have an installation kit on the 2006 GMC. I have included a link to the instructions below.
You... view full answer...
The difference between 11.56 and 11.58 volts is pretty small relatively speaking. The truck SHOULD be putting a maintenance charge on the battery as you are towing, but the amount of voltage that circuit puts out isn't so large that it will make a huge difference.
Test the 1:00 pin of your 7-way for voltage with a circuit tester like part # PTW2993 to see if its active. view full answer...
Yes. The Dexter Trailer Idler Hub Assembly # 84545UC1-EZ can be used with the Timbren Heavy Duty Axle-Less Trailer Suspension # ASR2KHDS03 since they both use:
Bearings: # L68149 inner, # L44649 outer
Races: # L68111 inner, # L44610 outer
Seal: 10-19 part # RG06-050 (pair)
The # 84545UC1-EZ has a 5 on 4-1/2 bolt pattern and comes with the bearings, races, seals, grease cap, wheel bolts, and lug nuts included. view full answer...
Yes, the AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump # 341032 that you referenced is a confirmed fit for all models of your 2002 GMC Savana Van so it will work well for you! It does fit in the area behind the rear door and the rear seats like you mentioned with third row folded down. view full answer...
Thank you for all of the info!
There are a few different options for using your sliding Curt Q24 # C16546 with the puck system on your 2018 GMC Sierra 3500. If you have the short bed then you need the Adapter Rails # C16023 but if you have the long bed you can either use the Adapter Rails # DM6206 to retain the sliding feature (for future use) or you can swap out the slider for the Stationary Legs # C16025 which drops your Q24 straight into the pucks on your pickup.
I have attached review... view full answer...
If you have a hard folding tonneau cover that does not cover the stake pocket holes like the BAKFlip MX4 Hard Tonneau Cover part # BAK448130 which is a fit for a 2019 GMC Sierra 1500 with 5-3/4' bed then you can use the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4002965. The Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4002966 won't work as the uprights are angled therefore would hit the panels when folded back. The uprights on the Adarac Pro Series are straight... view full answer...
Tire manufacturers require that you fill to capacity when cold.
If you go with the Provider ST235/85R16 # TTWPRG235R16 you have to run it at 110 psi at all times otherwise you'll cause heat build up which causes tire failure. view full answer...
Unfortunately I see this happen a lot, where customers want to transfer their grille guards to a new truck using a different mounting bracket set and they're unable to. This is because grille guards are designed specifically to fit certain models of trucks and rarely do they crossover to different manufacturers; long story short, you're not going to be able to mount a grille guard for a Chevy truck on a GMC truck or a Ford truck.
It looks like the Replacement Mounting Brackets # 57-378PK... view full answer...
If your 2016 GMC Sierra 2500HD has D4C sockets only with a HID headlight kit then you can use these headlights part # P230400MF. The HID kit can be converted to halogen headlight bulbs if your HID system is aftermarket but you would need a HID conversion kit. If the HID system is OEM then there is not a way to convert it according to my research but you could call the dealership just to be sure. view full answer...
You can definitely carry the Thule EasyFold XT # TH903202 with a front mount hitch on your GMC Sierra 2500 Denali!
It looks like you input a 2019 GMC Sierra 2500 in as your vehicle. If this is the year that you have then we have 2 different front mount hitch options for you, the Draw-Tite # 65078 which sticks through your front fascia (cleaner look but cutting of fascia where the license plate sits) and the Curt # C31071 which hangs below your fascia (no fascia cutting but might reduce... view full answer...
According to my research the weight ratings your found for your 2015 GMC Sierra 2500HD Duramax Crew Cab 4WD are correct but it is always a good idea to confirm this with your copy of the owner's manual.
Since 5th wheel or gooseneck towing places the tongue weight (or pin weight) of the trailer almost directly on top of the rear axle it is extremely common to see higher weight ratings for 5th wheel/gooseneck towing than bumper pull towing.
If you'd like to tow a 5th wheel/gooseneck trailer... view full answer...
The custom trailer hitches we have available for your 1995 GMC G20 Van, such as the Curt Class III # C13016 that you were looking at, do indeed feature pre-drilled holes that are designed to line up to existing holes in the van's frame rails and bumper.
If your van doesn't have the existing bumper bolts and nuts that are used to secure the front of the hitch you will need to drill into it (and obtain the necessary hardware) to make this connection. I really can't recommend passing this... view full answer...
While we do have underbed fifth wheel rails for your 2006 GMC Sierra 3500, the Under-Bed Rail and Installation Kit for Reese Elite Series does not fit; rail kits are specific to vehicle frames which are going to be different depending on their length. Though there are some underbed kits which fit both short and long beds, the Elite Series does not.
For your '06 Sierra 3500, to allow full bed access when you are not towing you will need the following:
- Custom Underbed Installation Kit... view full answer...
Thanks for the picture of your wheel and valve stem setup. I'd recommend 135 degree valve extenders like the part # WM8029135 as this will put the valve stem at a better angle than a 180 degree kit. These will work great with your current wheel setup as well that uses rubber valve stems. view full answer...
The shaft diameter of the Replacement Anti-Wear Shoe Assembly and Runner # 3371303100 is exactly 1 inch. I have attached an image to assist. view full answer...
Sometimes fifth wheel adapters like the # CAB-C5G void the warranty of the trailer they are installed on. That said, we've not had any issues on trailer frames caused by adapters like this so I'd doubt you'd ever have a problem but it's maybe not the most ideal solution for a full-timer.
I attached an install video for this for you to check out as well. view full answer...
Yes, the K-Source Custom Extendable Towing Mirrors # KS62075-76GE will work regardless of if you have heated mirrors currently or not. That feature just wouldn't be active. view full answer...
Thanks for the purchase and to answer the question about replacing the radiator on your 2006 GMC Yukon Denali XL, that is not something we recommend because the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504 you got is an accessory cooler that works in conjunction with your factory cooler. Also keep in mind you do need Derale Snap-In Radiator Adapter Fitting for GM # D13035 to install this cooler on your Yukon.
In regards to the line on the old cooler, what you need to do... view full answer...
The Thule Portage Canoe Carrier # TH819 is a fit for the factory roof rack on your 2007 GMC Yukon Denali XL. It is pretty much the only canoe carrier confirmed to fit your factory roof rack. But it is a great option. I have linked a video review of it for you. view full answer...