The length I'm seeing for a 2020 Forest River Rockwood Mini-Lite 2104s Travel Trailer is 22.33ft so I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer - Up to 24' Long - Gray # AD67ZR. The Olefin HD travel trailer cover works best for long-term storage in all climates. The top panel constructed of Olefin HD fabric blocks harmful UV rays that can cause cracking and fading, beads water on contact, prevents dirt and dust particles from reaching trailer surface, and... view full answer...
The specs for your 2019 Forest River Rockwood Mini Lite 2109S Travel Trailer I'm seeing show 22.33' in length. If that's correct for your trailer then I recommend the Adco Polypropylene Storage Lot RV Cover for Travel Trailer - Up To 24' Long - Tan Item # 290-74842
This cover will protect your trailer from UV rays, dirt, wind, and snow and has vents that help prevent damage to the cover in high wind conditions. The UV-treated 4-layer polypropylene breathes to prevent moisture build up... view full answer...
For your 2016 Forest River Rockwood Mini Lite Travel Trailer the Curt RV Bumper 2" Trailer Hitch Receiver Item # E-100 would be a perfect receiver however the Kuat Sherpa 2.0 is not rated for use on travel trailers due to the stress and movement caused by a less sophisticated suspension system.
I recommend the Swagman Original - 4 Bike Rack for 2" Trailer Hitches Item # S64400 as it is RV rated with a weight capacity of 140lbs and can also be used on your car/truck/suv hitch if needed. view full answer...
Yes, the Adco Olefin HD RV Cover # AD47ZR is the correct size for your 2021 Forest River Rockwood Mini Lite 2205s. This cover is designed for travel trailers with a box 20'1" to 22' long. I see the overall length of your camper is 23'10" with a roughly 2'6" tongue that puts the box at 21'4". view full answer...
The # TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.
Please note, the handle is sold separately as part # TJSC-24-HD but it's included if you purchase the pair as part # TJSCHD-24 for the 4 jack set as part # TJSCHD-24-4.
If you click the produced link, you can see a product demonstration video featuring the... view full answer...
The Forest River Rockwood 2507S measures 25'10" end to end but if you subtract the tongue you'll end up with about 23' long therefore the correct Adco Polypropylene Storage Lot RV Cover is part # 290-74842. There are no panels on this cover for entry so you'll have to lift the cover near the door. If easy entry is important to you then you might want to go with the Classic Accessories PolyPro III Deluxe Travel Trailer Cover part # 052963733631 which has zippered panels over the doors. view full answer...
Since you have a Coleman you'll have a 9-pin connector and would need a wire harness adapter so you would need the Advent Air Replacement RV Air Conditioner for Coleman Setup # ACCOL150. view full answer...
The SolidStep Manual Fold-Down Steps part # LC791572 is designed for an entry threshold height between 27" - 36". It will also require an entry width between 25" - 28-7/8". Therefore, so long as you are within the range for each measurement there will not be any fit issues. It does not matter is you only clear by 1/4" just so long as you are within the range listed. view full answer...
The correct hub/drum for a Dexter 4,000 Lb Axle is the Dexter Trailer Hub and Drum Assembly part # K08-426-91. Then for the brakes, you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469. The hubs/drums for a 3,500 lb axle are slightly different. view full answer...
The Reese Weight Distribution System part # RP67509 is a very good, cost effective weight distribution system for a Forest River Rockwood Mini Lite 1905. It is rated appropriately for the weight of the trailer which will ensure you get the best performance and it comes with everything that you need for the exception of a hitch ball, the 2" Hitch Ball part # A-90. The Reese Weight Distribution System is super easy to setup and use. For setup; just clamp on the spring hanger brackets, insert... view full answer...
Correct, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step # TL32SR is the right size for your 25-1/2" wide doorway.
However, you'll also need to verify your entry height as well. You'll want to measure from the mounting point to the ground, and use the chart I've attached to verify the correct steps for your 2017 Forest River Rockwood Mini Lite. view full answer...
The Gustafson 12V RV LED Ceiling Light # GUS54FR is only designed to be used with a switch, which is why you're hearing that buzzing noise.
We have some other lights with this diameter for the interior of an RV but unfortunately none of them are designed to work with a dimmer switch. view full answer...
Yes, the Low Profile LED RV Tail Light # RVSTLB60 is all you will need on the drivers side of your 2012 Forest River Rockwood travel trailer since the license plate has been relocated. The only difference to the Low Profile LED RV Tail Light # RVSTLB61 is the base for holding the license plate and the clear lens at the bottom of the cover for the license plate light. There is no additional wiring used with this light.
Be sure that your license plate does have a light on it when operating... view full answer...
For some unknown reason stabilizer manufacturers love to just make each stabilizer's mounting holes slightly different than the rest. While we don't have an exact match to the dimensions you stated you luckily can still use almost any other stabilizer scissor jack because the mounting brackets can just be removed from the old jack and bolted onto the new jack so that it bolts right up without having to drill new holes.
I've attached a diagram of the # UF48-979006 mounting holes as well... view full answer...
The Roadmaster # RM-2450 Comfort Ride Shock Absorbers for Tandem Axle Trailers is designed for 3500 lb axles. A 3500 lb axle would typically use a 2-3/8 inch diameter axle tube. I don't have any way to confirm which axles your travel trailer uses, but if it has a 2-3/8 inch diameter axle tube, and uses an L68149 inner/L44649 outer wheel bearing, you definitely have a 3500 lb axle.
From your description, it sounds like your leaf springs sit under your axle. Roadmaster confirms that the... view full answer...
You are on the money about the Adco cover that fits your 2016 Forest River Rockwood Mini Lite 2304KS; I can confirm the right fit is the following:
- Adco SFS AquaShed Cover for Travel Trailer # 290-52241
This is a great choice because this cover is designed to offer protection against all the elements, including snow, and even protects your trailer from heavy exposure to the sun and wind. view full answer...
Yes, the Torflex Lift Kit # K71-707-02 will indeed fit your 2020 Forest River Rockwood Mini Lite 2109S with Dexter #10 3,000 lb axles. This kit is made specifically for the #10 Torflex axles rated between 2.3K-4K, so it will be exactly what you need to add 2-5/8" of lift to your trailer.
We installed this kit on a 2018 Rockwood Mini Lite and we made and install video. I have linked this video as well as our review video below if you want to take a look. view full answer...
The best cover for your 2016 Rockwood Mini Lite 2502KS is one from Adco, with the correct fit being the following:
- Adco Polypropylene Storage Lot RV Cover for Travel Trailer # 290-74843
This cover is a fit for travel trailers that measure 24'1" - 26' long (not counting the trailer tongue) so it is the perfect size for your Rockwood Mini Lite. The reason I like this cover more than any other is that it is designed for all types of climates; it has four layers of polypropylene, which... view full answer...
The Swagman Trailhead 4-Bike Rack part # S63381 can indeed be used on the back of a trailer with 2" hitch because it has a fixed shank which means it can hold up to the abuse a bike rack experiences on the back of a trailer.
The Replacement Anti-Sway Cradles for Swagman Titan or Trailhead Bike Rack part # SP499 is correct for the Swagman Trailhead 4-Bike Rack part # S63381. view full answer...
The Patrick Distribution RV Hand-Held Shower Set with Shut-Off # 277-00002 has female threaded ends (one of which is for the shower head) and you can use the accompanying photo to see if this connection will work for your trailer.
There's actually no way for us to know the shower you have on your trailer, and the Shower Set # 277-000029 is not a fit for any specific trailer, so what I can offer is the connections it has and you can use that to determine if it will fit.
I have also added... view full answer...
Go To Results