The Entegra Coach Vision is built on a Ford F-53 Chassis which means there should be a pre-wired brake controller port under the dash. The exact location of this port can vary but most likely it will be on the left side of the steering column support which you can see shown in the attached photo. If you don't already have a brake controller in mind, the Tuson DirecLink Base Model Trailer Brake Controller part # 335DL-100 gets my approval as it is one of the most advanced controllers on... view full answer...
Not that we know of, but that doesn't mean it doesn't exist. Brake controller manufacturers only check the most popular vehicles for that kind of thing and since most people don't drive around an F-650 it's possible they haven't even seen one. Regardless, we will be able to get your controller installed so I recommend using the Tekonsha Prodigy P3 # 90195 as it is super easy to use and can be configured to a few different trailers so it's easy to change your settings.
What you'll need... view full answer...
You should be able to install the Tekonsha Prodigy P3 # 90195 on your 2019 Ford F-750 Super Duty by splicing into existing wires under your driver-side dash, but you'll need to use a circuit tester like part # PTW2979 to do so as I haven't been able to find a wiring diagram to show what wires are for what function. Below is a list of the wiring connections that need to be made with the pigtail that comes with the P3:
Black - 12V Power
Blue - Brake Controller Pin on 7-Way
White - Ground
Red... view full answer...
Since the Buyers Products 2" Pintle Hook Mount - 6 Position - 12-1/4" Shank item # 337PM812 is just a mounting plate with no specific attachment installed it doesn't have a listed rise or drop. Considering the 12-1/4 inch tall mounting surface has vertical hole spacing of 1-3/4" and the 2 inch shank, I estimate you could see somewhere between 8-10 inches of drop.
I recommend the Curt Pintle Hook - Bolt On - 10,000 lbs item # C48205. view full answer...
To install a brake controller on your 2017 Ford F750 you will need to hardwire it as there are no factory plugs under the dash. There will be some wires located under your dash that are located on the driver side. You will simply need to use a Circuit Tester # PTW2993 to test them although sometimes manufacturers will label the wiring.
I recommend installing the Tekonsha Prodigy P3 # 90195 as it is very easy to install and features a user-friendly LCD screen that doesn't use codes like... view full answer...
Go To Results