I don't believe we have the 4 screw plastic hitch cover plate you are referring to. I've attached all of our hitch cover options for 2 inch hitch receivers to assist.
If you are looking for a hitch mounted license plate holder, we have the steel # C31002 and # 5443. Both of these are welded to the receiver shank. We do not carry a plastic version of this. view full answer...
I believe you are looking for the Replacement Weather Proof Cover for Swift Hitch Camera, # PB04. This is a clear molded cover that covers the power button and antenna. view full answer...
To replace the lost covers on your 2019 Ford F-350 you need the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails # 58199. If you need the gooseneck cover as well you can use the # RP30136. view full answer...
Yes, you can buy a replacement key hole cover for the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome # e98880. Replacement Dust Cover for etrailer Hitch Locks - Rubber - Qty 1 # e98923 is what you are looking for. view full answer...
The correct replacement rubber cover for a Curt EZr Double Lock Underbed Gooseneck Trailer Hitch is the Replacement Rubber Cover for Curt Underbed Gooseneck Trailer Hitch part # C66165. view full answer...
We have a thin foam gasket that you could use, # AMG-FM. with a 2 inch hitch cover. They are thinner than the gasket that came with hitch cover # CR-007 so you may need more than 3. view full answer...
For the magnetic cover for a Hide-A-Goose trailer hitch, you will need to use # 58389. The cover does not come with the replacement ball # 19309. view full answer...
We don't have the LED version of the Light-Up Trailer Hitch Receiver Cover - Brake, Tail, Turn - 2" Hitches # CR-007. However, we do have the Flint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches # FHG72VR as an alternative.
I attached a review video of the # FHG72VR for you to check out. view full answer...
Sounds like what you are looking for is the part # 58389. This is the replacement magnetic cover for the Draw Tite Hide a Goose hitches like what you have. view full answer...
We do carry a standard hitch pin like # PC3 that works with the Chevy Colorado Hitch Cover # CHAAHC-12 but the exact replacement for that part is not available. This fits any 2" receiver, installs easily and secures the receiver cover to the hitch. You also don't have to worry about it locking up in the future and preventing it from functioning properly.
For added security I recommend the Deadbolt Receiver Lock # e98880. Not only will this serve the same purpose as the bolt that you're... view full answer...
While we do not have a replacement magnet for the Undercover Access Hole Cover # 306-X7223 you should be able to find a suitable replacement from a local hardware/craft store. view full answer...
Assuming you have the Ford factory puck system we do have covers available for your 2012 Ford F-350 Super Duty. The Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails # 58199 will work for the puck holes and for the gooseneck hole you will want the Rubber Hole Cover for Reese Elite Series Under-Bed Gooseneck Trailer Hitch # RP30136.
These will also work for rails by Draw-Tite and Reese. The puck covers are right about 1-5/8" long x 1" wide and the gooseneck cover... view full answer...
I went out to the warehouse and pulled a Brake Light Trailer Hitch Receiver Cover, # CR-007. The correct replacement bulb is an automotive style bulb 1156. It also fits a 2005 Volkswagen Jetta. view full answer...
If all you need is covers for the Ford hitch prep package pucks that you have on your truck all you would need is the part # 58199.
If you need the trim rings you would want the part # RP58458 which comes with 4 rings.
Unless you need the service kit part # 58253 for a damaged puck I wouldn't recommend it for you. view full answer...
The replacement puck plug covers you can use are part # 58199.
These come with two in the package so you will need to adjust the quantity you order for the 4 puck holes you have in the bed of your truck. view full answer...
We definitely have what you need to keep debris out of your pucks and gooseneck ball hole. The Draw-Tite Magnetic Cover # 58389 will work, but I am not a huge fan of the magnetic style covers as there is always a chance that it can fly off. With that said, I recommend going with the Reese Rubber Hole Cover # RP30136. From what I could find, it looks like the factory gooseneck hitch for your 2016 Ford F-250 was either sourced through Reese, or very similar to it. Either way, we have found... view full answer...
I have a solution for you, You can use the Replacement Lock Housing for Thule Snug Tite Hitch Receiver Lock and Thule Hitch Bike Racks, Item # 753-3725-02. Check out the video to make sure this is the part that you are seeking. view full answer...
They do not offer a replacement lens for the Light-Up Trailer Hitch Receiver Cover part # CR-007 which means your only option would be to replace the entire unit. view full answer...