For a 13-1109 slide out motor the correct replacement would be the Replacement Gear Motor Assembly for Lippert Electric Slide-Out # LC386327. view full answer...
Sounds like you're needing the Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9145ALV which is compatible with the popular lithium batteries and is also rated for 45 amps so it will be a great replacement for your WFCO WF-8845 converter. view full answer...
We have the needed replacement slide-out motor for you, Lippert Electric Slide-Out Motor Assembly # LC386322 will replace your P/N 521748.
Please note the linked product review video below. view full answer...
Most of the time, the numbers molded into a trailer lamp lens are numbers that state that the lamp meets certain DOT regulations, and isn't necessarily an identifier for the lamp. However, the PM 108-15 number you found DOES indeed identify your existing lamp as a 106A from Peterson Manufacturing. Peterson has confirmed that the # 108-15A is indeed the correct replacement lens. You can confirm this for yourself by examining the lamp housing itself. Look for either a '106A' or a '108WA'... view full answer...
The 2001 Fleetwood Mallard 26H travel trailer has a specified weight of 5690-lbs so it is likely to have two 3500-lb-rated axles. You can confirm this axle rating by checking the sticker or plate on the axle tube itself, or it could be included in your owner documentation. The available online data did not include axle capacity for your specific trailer but similar models have this axle capacity.
Leaf springs for 3500-lb axles appear on the linked page. These are offered in several lengths.... view full answer...
I don't have any replacement parts designed to fit TriMark latches since we do not currently carry any of their products, but we do have a number of available replacement latches if you find you need to replace the whole latch. Our most popular baggage door latch is the Global Link RV Baggage Door Slam Latch # 295-000015.
I have linked all of our baggage door locks for you. view full answer...
I checked with Yakima, there are no replacement parts for the Spare Tire Carrier for Yakima Roof Cargo Baskets part # Y07076. I don't think the j-bolt is something you can find locally either. It's mostly just all-thread rod with a bend in it. If you are absolutely opposed to a new carrier then try going to a hardware store for all-thread rod, heat the end section and try to put a bend in it. view full answer...
For your 2006 Fleetwood Jamboree Motorhome I recommend the HydroMax RV Fresh Water Pump # P25201. This has a self-priming design and works as a direct replacement for a 12V, 3 gallon per minute pump. It comes with a built-in check valve to prevent backflow and a strainer to keep debris out of the pump. The pump can mount in any position and comes with a 2-year warranty. view full answer...
Thanks for the pics! I confirmed with Lippert that the correct replacement motor for your 2007 Fleetwood Bounder Motorhome is the Replacement PowerGear RV Above Floor Slide-Out Motor # LC368417 based on the motor numbers you provided.
I've actually replaced one before on a 2007 Fleetwood Bounder so check out the video below to see how I did it. view full answer...
Thank you for all of the photos!
According to all of the measurements you took, I recommend the following from Global Link:
- Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019
Attached is a review video for you to check out! view full answer...
According to my available research, the NTP-95-4925 is the exact same part as the Replacement PowerGear RV Above Floor Slide-Out Motor - Double Shaft - Mid Torque # LC368417. This is a direct replacement if you have the Kwikee Slide-Out Base Motor 1510000006 on your system. In order to make sure this is the part you need, I recommend confirming the base motor number in your slide-out assembly.
I went ahead and included instructions on how to identify your base motor for your convenience. view full answer...
Yes, you can unscrew the old 16" x 16" door and swap it out with the Replacement Access Door for Furrion RV Tankless Water Heater - 18" x 18" # FR73FR. We also carry a 16" x 18" door # FR63FR if the 18" x 18" is too large.
I do highly recommend using some butyl tape # AL28FJ on the back of the door over the screw holes to form a watertight seal between it and the wall of your RV. view full answer...
The correct replacement slide out motor for the Power Gear 524276 Motor on your 2006 Fleetwood Expedition is the Lippert Components RV Slide-Out Motor part # LC368193. view full answer...
We do have a sliding door guide available from JR Products, the Replacement RV Pocket Style or Sliding Door Guide # 37220595. This guide has an adjustable feature that allows it to fit any door thickness, and includes mounting screws.
I have attached a review video for your reference. view full answer...
The Replacement Gear Motor Assembly DSMX with P Connector for Lippert Slide-Out Item # LC368190 is the replacement for your 523725 slide out motor view full answer...
Depending on the measurements of your existing microwave we may have a few options that work for you. I did some research and was unable to find measurements of your existing microwave.
The Greystone Standard RV Microwave w/ Trim Kit # 324-000106 is a built-in microwave that measures in at 23 3/8" wide, 15" tall, 14 1/4" deep and is 1,350 watts with a capacity of 0.9 cubic feet.
Or
You can go a little larger with # FMCM15SS which measures 29-15/16" wide, 16-3/8" tall 15" deep, is rated... view full answer...
We don't currently carry Trimark entry door locks so I wouldn't be able to get you a specific part for your current lock. I can however get you a replacement entry door lock if you can provide me with the cutout hole measurements.
For example, the Global Link RV Entry Door Locking Latch Kit # 295-000019 will fit a cutout hole 2-1/2" to 3" wide x 3-1/2" to 4" tall. view full answer...
If your old deadbolt had a key with a purple casing and "315" stamped on the key, then you've likely got a GlobalLink deadbolt. The Replacement Key for Global Link RV Locks - 315 - Qty 1 # 295-000041 would be the correct replacement for you. Entry door locks won't be RV specific and we don't have a database that tells us what manufacturer's locks are on specific coaches, so I don't know if you've got a GlobalLink for sure but it is one of the more popular brands. view full answer...
Thank you for that info and we do have the replacement for your Power Gear Slide-Out motor 1010001663; the correct part is the following:
- Replacement MT Gear Motor Assembly with Connector B for PowerGear Slide-Outs # LC46UD view full answer...
The correct replacement part is the Replacement Motor for Lippert Power Gear Electric Leveling Jack System - Right, part # LC89CJ, if your are replacing the right motor.
I have included a product description link and video demo link below. . view full answer...