We've got 2 different axle lift kits that you can use on your Grand Design, and it really just depends on how much of a lift you're wanting and how your axles are currently configured.
The Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 is a simple installation and the more cost-effective option but it requires that your axles are currently sitting on top of your leaf springs. This will raise your trailer the eight of your leaf spring stack plus the 3" diameter of your axles.
The... view full answer...
Hey Dan, so Furrion doesn't offer just the module you are looking for so only option would be a front panel like the part # FR83RV. view full answer...
No, the Correct Track Trailer Alignment and Lift Kit # RR55QX that you referenced are not the Never Fail bushings. The picture is correct and the kit has 16 brackets and 16 correction plates. view full answer...
The hyper flashing issue you are referring to is not typically found on trailers and is more of a vehicle issue. Since the power sent to the trailer gets its signal from the vehicle the trailers lights like the # CE86FR are going to flash at the same rate as the vehicles lights flash. This happens on the trailer regardless if they are LED or Incandescent. An issue some newer vehicles have is they sense the LED lights as a bulb out issue. These would require a Adapter # 20142 if you have... view full answer...
Hi Jim; I'm sure there is a slide-out awning that will fit your 2020 Crusier RV Shadow Cruiser but a 6" extension on each side wont' be possible. To find the right slide-out awning you will need to measure the width of your slide-out as seen in the picture below.
For example, the # LCV000163273 you were looking at fits slide-outs 57"-61" wide. The awning fabric is 61" wide so the side overhang will depend on the slide-out width. A larger awning would not fit since the arms that attach... view full answer...