There's really no set hard and fast rule on the interval of time at which trailer brake assemblies should be replaced, but once the friction material on the brake pads gets down to about 1/16 of an inch or the magnet gets grooved or worn to the point where the copper wire inside of it is visible, that's the point where you'll want to replace them.
If the face of the magnet has grooves worn in it, take a good look at the armature surface of the brake drum where the magnets ride against.... view full answer...
The etrailer 3,200-Watt Portable Inverter Generator part # 333-0003 has a two year warranty for residential use and a 180 day warranty for commercial use. The warranty of the Firman inverter generators can vary depending on where it is purchased. view full answer...
Sounds like you're using a pneumatic grease gun. I'd be leery of using a pneumatic gun to grease my wheel bearings, as it's easy enough to overfill them with a manual gun and blow out the grease seals which means you'll need to tear down the hub to replace the seal. You'd be best served by taking the cautious route and filling the hubs manually. A product like the # ALL940798 you'd looked at would work perfectly. view full answer...
Go To Results