bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chrysler


  • Will Roadmaster Rollaway Trailer Hitch Protector Fit my Chrysler Town and Country 2 Inch Hitch
  • The Roadmaster Rollaway Trailer Hitch Protector is a universal fit item. It is designed to fit most 2 x 2 inch Class III and up hitches. We carry 2 different 2 inch hitches for your 2009 Chrysler Town and Country. They are Draw-Tite part # 75579 and Curt part # 13364. I got one of the Roadmaster RM-050 from the warehouse and tested on those 2 hitches and it fit both. If you have one of these 2 hitches, it will fit fine. If you do not have one of those hitches, it will probably fit. You...
    view full answer...

  • Trailer Wiring Recommendation for 2002 Chrysler Concorde
  • Sounds like you are trying to install trailer wiring on your 2002 Chrysler Concorde. The best solution I can provide for you is the install harness part # C55364 which is custom fit for your vehicle. It would just be a matter of installing the connectors between the taillights of the vehicle. Your vehicle's taillight circuits are slightly different than what trailer wiring circuits have so an adapter is needed, but this harness comes with the adapter wired into it already.
    view full answer...

  • Will a Trailer Wiring Harness Work if the Ground is Weak or Disconnected on a 2005 Chrysler Pacifica
  • Yes, a weak or absent ground connection will prevent the trailer wiring harness # 118303 from working properly if at all. On some vehicles there may be a screw nearby that you can remove, put through the ground wire ring terminal, and then reinstall. As long as the ring terminal is making a connection to a bare metal surface (no paint or coating) then it will work as a ground location. Otherwise it is recommended to use a self-tapping screw such as # 1172904 directly in the metal of the...
    view full answer...

  • Does Flex A Lite Radiator Fan # FLX180 Fit 2002 Chrysler Prowler
  • Flex A Lite test fit the fan part # FLX180 that you referenced and found that it fit and worked well in a 2002 Chrysler Prowler like yours. This is a single speed fan though that moves 3,300 CFM when on.
    view full answer...

  • How to Pick Out Replacement Trailer Hub Seal
  • The seal number you gave me does not cross reference with any of the seals we offer. You will need to measure the diameter of your spindle where the seal rides and the inner diameter of where the seal installs in your hub to pick out the correct replacement.
    view full answer...

  • Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
  • The distance from the center of the hitch pin hole of the Curt Hitch part # C12264 to the furthest point out on the rear bumper of your vehicle would be right at 5 inches. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
    view full answer...

  • Trailer Breakaway Kit For Small Utility Trailer
  • Breakaway kits aren't fits for any specific trailer, and while it doesn't look like the trailer you mentioned has electric brakes, if you were somehow able to add them, then for a breakaway kit the best option is the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load # 3802308. I have added links below to a couple video reviews for you to check out as well.
    view full answer...

  • Parts Needed for Flat Towing My 2007 PT Cruiser Behind a 2002 Chevrolet Suburban
  • Yes, you can use the Tow Ready Adjustable Tow Bar, item # 63180, to tow your 2007 PT Cruiser Turbo convertible. Keep in mind that this tow bar is rated for towing speeds of 45 miles per hour or less. A better tow bar option would be the Blue Ox Adventurer Tow Bar, # BX7322 , which is designed for towing long distances and more frequently. You will need some other items along with the tow bar to complete your towing setup. First, a base plate kit for the PT Cruiser is needed. The Blue...
    view full answer...

  • Fit of Thule OutWay Trunk-Mount Bike Rack # TH45JV on 2014 Chrysler Town and Country
  • The Thule OutWay 2 Trunk-Mount Bike Rack # TH45JV that you referenced is indeed a fit on your 2014 Chrysler Town and Country van. I verified this with Thule and within our own fit guide. This premium-quality trunk rack includes a cable lock to secure your loaded bikes, road-dampening technology (RDT) to help absorb road shock and minimize vibration and the patented FitDial mounting system that makes installation easy. Do note that when a trunk rack is installed your rear wiper cannot be...
    view full answer...

  • Availability of Replacement Crossbar for Roadmaster Falcon Tow Bar
  • The Falcon crossbar is different from the Tracker crossbar as it has quick disconnects built into it. If the Falcon you are buying somehow didn't include the crossbar you can replace it with the part # 910021-00.
    view full answer...

  • Adding a 7-Way Trailer Connector on a 2007 Chrysler Town and Country for Trailer Lights Only
  • If you use a 4- to 7-Way adapter, such as # 37185, then you will just have the lighting functions on the trailer (minus reverse lights). On the adapter, you will have to ground the white wire to the vehicle frame, otherwise it will not work. The blue wire is for electric brakes which you said you do not need. The black wire is for 12 volt power if the trailer uses any. If those functions are not needed you can just cap off those wires and stow them out of the way. The last wire would...
    view full answer...

  • Troubleshooting Trailer Wiring Harness Shorts Out Every Couple Years on 2003 Chrysler PT Cruiser
  • What usually causes taillight converter wiring harnesses like the part 118462 to break is a short on the trailer wiring or they get overdrawn. They have discontinued that particular harness because I believe they were having that overdrawn amperage issue. Before you replace your wiring harness I would recommend you make sure that the wiring on your trailer isn't damaged anywhere which would cause a short and fry the converter. Look for corrosion or exposed wire and fix as necessary. Also,...
    view full answer...

  • Why Do I need a Stabilizer Strap to Use a 2 Bike Hitch Rack on a Curt # C11132 Hitch
  • The purpose of the stabilizer straps is to prevent the bouncing and jarring that bike racks usually experience when hitting bumps from damaging the hitch. The strap you would want is the Curt Bike Rack Strap, part # 18050. The reason you want to use a stabilizer strap is that you might twist your the hitch up or damage the frame of your 2001 Chrysler PT Cruiser. If you use the stabilizer strap you would have no problem carrying two bikes on a hitch mounted bike carrier. For a bike rack...
    view full answer...

  • Brake Controller Recommendation and How To Install it in a 2003 Chrysler Town and Country
  • First let's start with a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that will apply the trailer brakes at the same intensity as the tow vehicle brakes are applied. Unlike a time-delayed controller like the # 5504 that you referenced that always will apply the brakes at the same intensity...
    view full answer...

  • Recommended Trailer Hitch and 4-Bike Swing-Away Rack for a 2017 Chrysler Pacifica
  • The trailer hitch I recommend for a 2017 Chrysler Pacifica is a etrailer Trailer Hitch Receiver part # e98903 which is an excellent easy to install, bolt-on option. Then for a swing-away 4-bike rack I recommend the Thule Apex Swing XT 4 Bike Rack part # TH9027XT as our best option. It has lock for security and it comes with an anti-rattle hitch pin. This combo will work very well together and allow for full access into the hitch without issue. In regards to installation, these are really...
    view full answer...

  • Install Instructions for etrailer Hitch e98903 on 2019 Chrysler Pacifica Hybrid
  • The installation of the etrailer.com Trailer Hitch Receiver # e98903 will be the same as the Curt Trailer Hitch Receiver # C13383 for your 2019 Chrysler Pacifica Hybrid and I have attached the installation instructions of the Curt hitch for you so you can see exactly how to install the hitch on your Pacifica (the only difference between the two hitches is the matte black powder coat finish of the etrailer.com hitch compared to the gloss black powder coat finish of the Curt hitch). The...
    view full answer...

  • How To Install a 7-Way Trailer Connector On a 2018 Chrysler Pacifica
  • The towing capacity of a 2018 Chrysler Pacifica is 1,500 lbs if you don't have the factory tow package or 3,600 lbs if you do have the factory tow package. The use of electric trailer brakes is pretty common nowadays and I recommend looking for a trailer that has them as it's going to equate to a safer overall towing experience but this is not required. I have attached parts you will need for both options below. etrailer Trailer Hitch Receiver part # e98903 T-One Vehicle Wiring Harness...
    view full answer...

  • Converting 4-Pole on 2005 Chrysler Town and Country to a 7-Way Trailer Connector
  • Your best bet for an easy install would be to use the 4-pole to 7-way adapter, part # 37185. The adapter will plug directly into the 4-pole supplied by your T-One connector, leaving 4 remaining wires. The white wire would be grounded to the vehicle frame, the purple wire would tap into the reverse lamp circuit (if needed), the black wire which supplies a 12-volt accessory power circuit to the trailer if needed is ran to the battery and the blue wire carries the output voltage from a brake...
    view full answer...

  • Replacement Installation Hardware for Curt Trailer Hitch and 2007 Chrysler Aspen
  • For replacement hardware to install Curt trailer hitch # 13702 on your 2007 Chrysler Aspen you will need # RHK. Enter the hitch number and manufacturer where indicated on the RHK page. I have also linked a video showing installation and the instructions incase you need those as well.
    view full answer...

  • Best Grease to be Used with Bearing Buddies
  • According to Bearing Buddy the best grease to use is a high quality, multipurpose # 2 grade lubricant. They also recommend not mixing different types of grease. I recommend using LubriMatic # L11465.
    view full answer...