In order to have this option, you will have to go with a retractable tonneau cover. The TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black, part # TX1473301, cannot be driven partly closed. You can drive with it completely open or closed. There is no "in between".
For example, the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails - Aluminum and Vinyl - Black, part # PE76CV, can be secured at 12" intervals. It is a tonneau cover that... view full answer...
The Adarac Aluminum Series Custom Truck Bed Ladder Rack # A49ZR only works with inside-the-rail tonneau covers. Since your current tonnea cover covers the rails it is not compatible with this or any other ladder rack. If you want to use both a ladder rack and tonneau cover, your only option would be to replace your current tonneau cover.
For a simple roll-up cover you could use the Access TonnoSport # A22050269. For a more premium option that will also work with this ladder rack you could... view full answer...
The Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black, part # 311-SWFA30A61, does not lock. The integrated pull strap is underneath the tonneau cover, so when your tailgate is locked you cannot retract the tonneau cover. Since it has an aluminum shell underneath the vinyl, you cannot cut the top of the tonneau cover to gain access to your truckbed. view full answer...
We do have an option for a tonneau cover that locks at different intervals, but the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWD77A01 that fits your 2018 Ram 1500 with a 5-1/2 foot bed is not a locking tonneau cover, and can't be stopped at points along your bed.
What I recommend instead is the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRD77A01.
Like the Switchblade, this is a manual, retractable tonneau, but it does lock at any point along your... view full answer...
The toolbox that I assume you are referencing is the BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, Roll-X, and BAKFlip Tonneau Covers BAKBX92333 listed in a question for the BAK Revolver X4 Hard Tonneau Cover.
I called my contact at Pace Edwards, and they said that some customers cut the rails of the Pace Edwards Switchblade Hard Tonneau cover # 31-SWFA19A45 from the cover in order to shorten the length near the cab. While this is an option, I would strongly suggest getting... view full answer...
We do carry tonneau covers similar to the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWD7936 for your 2017 Ram 3500 with an 8 foot bed that can be locked at different spots, but the Switchblade is not a lockable tonneau cover.
Instead I recommend the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRD7936 (Black) or # 311-M-JRD7936 (Matte Black).
The JackRabbit is like the Switchblade in that it is a manually retractable tonneau cover but has a lock which... view full answer...
The Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FMF1507 does partially cover the top of the stake pockets. All of the retractable tonneau covers partially cover the top of the stake pockets but the one that fits your 2004 Ford F-250 long that covers them the least is the RetraxPRO MX part # RT80323. view full answer...
I do have a truck bed tool box designed to work with the BAKFlip MX4 Hard Tonneau Cover part # BAK48120 for your 2017 GMC Sierra 1500 but the TruXedo TonneauMate Truck Bed Toolbox part # TX1117416 will not work as it is only designed to be used with TruXedo tonneau covers not BAKFlip tonneau covers.
For a toolbox that is confirmed to work with your BAKFlip MX4 Hard Tonneau Cover, I recommend the BAKBox 2 Collapsible Truck Bed Toolbox part # BAK92120. This toolbox is 10" wide x 10" deep... view full answer...
In regards to the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5755, the base pads will be removed with the towers as well as the t-bolts if taking it off the truck completely. That said, the system is designed to stay in place and the tonneau cover is still functional with the rack installed. view full answer...
Since you do not need to install any rails for the Extang Trifecta ALX Soft Tonneau Bed Cover - Folding - Vinyl, part # EX42TR, installation and removal is really simple. This tonneau cover is a traditional tri-fold design that rests on top of the bed rails. When it is time to remove this tonneau cover all you have to do is the following: fold the tonneau cover, slide the clamps toward the center of the truck bed, and undo the torque knobs at the bulkhead of the truck bed. It weighs just... view full answer...
The tailgate of your 2014 Ford F-150 with a 5-1/2 foot bed will open and close independently of TruXedo Lo Pro QT Soft, Roll-Up Tonneau Cover # TX597601 being open or closed.
To open the tonneau you will need to open the tailgate, so if you have a locking tailgate you will essentially have a locking tonneau cover. view full answer...
The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV does not come with great instructions.
In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV, you will need to start with the tonneau cover completely open. You'll then remove the tonneau railing caps or stop blocks, remove the 2 hex screws at the tailgate of the tonneau rails and remove the rear clamps. You'll then want to lift the end of the rail... view full answer...
No you cannot replace the front clamps of the Extang Trifecta 2.0 Soft Tonneau Cover # EX92430 with the Replacement Tail Clamp Assembly # EX31003005. The front and tail clamps are different in order to keep the tonneau cover securely in place and thus not interchangeable. view full answer...
The Leer Hard Tonneau Cover, part # LE79FR, does not have a locking function of its own.
However, because the opening latch is under the cover, if you lock your gate, there will be no way of accessing that latch. In effect, this locks the entire tonneau cover because the gate will block the latch.
I've linked to a video review of this cover that shows how it works. view full answer...
Actually the correct tonneau for your 2013 Honda Ridgeline would be the # BAK126601. This is one of the nicest covers on the market that would work well for you. view full answer...
To use the Craftec Tonneau Cover # 654517 you would have to cut away the part of the bed liner that covers the tops of the bed sides. Otherwise it would not install or fit properly. This is going to be the case with most if not all tonneau covers. view full answer...
The over-the-rail types of bed liners are problematic for tonneau covers but your idea of trimming the bed liner (so that it ends up under the bed rails) is absolutely perfect and will allow you to install a tonneau cover on your 2008 Dodge Ram 1500!
I have included a video featuring the TruXedo TruXport tonneau cover # TX248101 for you. view full answer...
The tonneau covers that do the best job at keeping the contents of the bed dry are ones that have drain systems to direct the water to the outside of the bed like the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRHA17A43.
We have the roll up # BAK39602 which is a hard cover that does not require drilling. view full answer...
You do not have to open or roll up the Truxedo tonneau cover # TX297601 in order to open or close the tail gate on your 2013 Ford F-150. You can keep the tonneau cover closed and still open/close the tail gate. The tail gate would have to be open to open the tonneau cover. If you want the cargo to remain secure you would keep the cover closed and then close and lock the tail gate. I have included a link to the installation details for you. view full answer...
The BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK52FR (and all BAK tonneau covers) cannot open unless the tailgate is open. However, the tailgate can open when the MX4 is in the fully covered position. view full answer...