I have a potential solution for you, but there is no gasket made specifically for the Optronics LED Trailer Clearance or Side Marker Light # MCL44RB1.
You could potentially use the Foam Gasket for MC32 Series Lights # A32GB. The MCL32 series measures 4" x 2" instead of the 4" x 1-1/2" that your MCL44 series measures. So you could trim off the extra foam from the height and the wire is located in a different spot so there may need to be some fabrication there as well. But, without there... view full answer...
Yes, for Dexter part number K08-247-1G you'll need the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # 84546UC3-EZ. view full answer...
The best option for lifting your torsion axle and getting a better ride quality would involve changing over to a Timbren Heavy-Duty Axle-Less Trailer Suspension. They have a couple options that will incorporate a lift right in the spindle. A 2" Lift # TASR35HDS07 or a 4" Lift # ASR3500S06. These utilize a rubber suspension system that each work independently of each other. This will offer you a better and smoother ride quality.
We do not carry any type of shock kits for torsion axle's... view full answer...
You are correct, as far as tire and wheel combos that come pre-mounted with a load range D 225/75-15 radial tire on aluminum wheel that has a 5 on 4-1/2 bolt pattern, we don't have any. A larger selection can be found with the more common 6 on 5-1/2 bolt pattern for the 225/75-15 tire/wheel assemblies.
Keep in mind that nitrogen filled tires can be topped off or filled with regular air if that's what you prefer. Although, nitrogen does maintain tire pressure much longer than standard... view full answer...