bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Bison


  • Availability of Replacement Shroud for Coleman Mach AC Model 8333-8669
  • Based on my research it looks like you have an older Coleman Mach AC unit that precedes the Mach 1, Mach 3, etc models. The current version of your particular AC is the Coleman Mach 3. With this in mind the MaxxAir TuffMaxx Replacement Shroud # MA00-325001 should fit your AC but I do still recommend taking a few measurements on your existing shroud to be certain. The MaxxAir Shroud features overall dimensions of 41-5/8 inches long, 29-3/8 inches wide, and 12-3/4 inches tall. I have attached...
    view full answer...

  • Replacement Shroud for Coleman RV AC 6749R707
  • According to what I found online, the Coleman 6749R707 is one of their Mach 3 models. The MaxxAir TuffMaxx Replacement Shroud we offer, part # MA00-325001 is indeed a fit for that Coleman AC unit. The shroud includes the necessary stainless steel hardware, foam pieces and foam tape needed to complete the install. I've linked to the install details and a product description video for you.
    view full answer...

  • Lift Kit for Dexter 6k Torflex Axle
  • Since you have a Dexter Torflex 6k axle on your trailer the lift kit you referenced part # K71-725-02 is a confirmed fit and would give you a lift of 3-1/8 inches like you are looking for.
    view full answer...

  • Troubleshooting In-Dash Error Codes When Using A Furrion 7-Way Power Adapter For RV Camera Systems
  • Most likely the relay inside of the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR isn't showing the same amperage draw that your vehicle is used to causing the computer to think that your tail lights are out and is throwing up an error on your dash. With this being so new and not having a chance to test it on multiple trucks we haven't seen this error yet. The one I tested in the attach video had no issues so if this remains a constant issue Furrion...
    view full answer...

  • Diameter of the Base on the Lippert Components 360 Siphon RV Holding Tank Vent Cap LC389381
  • The roof vent on your trailer is most likely for black water tank. The Lippert Components 360 Siphon RV Holding Tank Vent Cap part # LC389381 has a base with a 4" outer diameter. The holes most likely won't line up with your existing roof vent but you can drill new ones, jut make sure to seal everything up with part # 34427034145-1. The Lippert Components 360 Siphon RV Holding Tank Vent Cap is designed for a 1-1/2" or 2" diameter vent stack which is a standard size so as long as this is...
    view full answer...

  • Dimensions of the Adapter Brackets for the RV Propane Gas and Carbon Monoxide Detector # RS54FR
  • The 2-Wire RV Propane Gas and Carbon Monoxide Detector # RS54FR comes with 2 different mounting brackets. I have included the measurements to both brackets and a video that includes these measurements beginning at the 1:10 mark of the video. The long bracket measures 7-1/4" wide, 3-3/8" tall and hole to hole measurements of 6" (center of hole to center of hole) The short bracket measures 5-3/4" wide, 4-1/2" tall and hole to hole measurements of 5-1/4" (center of hole to center of hole)
    view full answer...

  • Recommended Quad Step MORryde StepAbove with Strut Assist For 30 Door
  • The MORryde StepAbove entry steps install inside your camper's doorframe, measure between the door frame flanges to determine your doorway width. The doorway threshold will be used as the mounting point, measure from the mounting point to the ground for entry height. If the width of your doorway is at its narrowest, 30", and you want a four step model, that would be the MORryde StepAbove, # MR28RR. However, this does not have the Strut-assist feature. The best fit with Strut-assist...
    view full answer...

  • Are Replacement Handle Grips for the Polar Cam-Action Door Latch Available for Replacement?
  • The handle grip for the Replacement Handle Assembly for Polar Cam-Action Latch Kits # 158-100 is not offered separately, unfortunately. So if you have these handles and you need new grips, you'd have to replace the entire handle.
    view full answer...

  • Could Stromberg Carlson Base Pad Extreme for Campers and Trailers # SC88VR be Used with Motorhome
  • The Stromberg Carlson Base Pad Extreme for Campers and Trailers # SC88VR has a weight capacity of 6,000 lbs per pad so as long as you'd be using enough of these for the overall weight of your motorhome they could work. Most of the time these are used as a base for leveling or stabilizer jacks which in these situations would not be taking the full weight of the camper.
    view full answer...

  • Should Vent Stay Open on Spaceport Adjustable A/C Ceiling Vent
  • First of all, I greatly enjoyed the phrase "cat fuzz" - that was awesome. Sorry to hear about the trouble you are having with the Spaceport Adjustable A/C Ceiling Vent# A10-3357VP although there isn't a method that is used for the slats to stay open, because they should simply do so on their own, as you can see at about the 1:30 mark of the linked video review of this product. It sounds like yours is not functioning properly, so you can replace it with another. If you don't want one with...
    view full answer...

  • Difference Between The Alpha Systems 1021 and 5121 Self-Leveling Sealants
  • Both the Alpha Systems 1021 Self-Leveling Sealant for RVs - White - 10.3oz - Qty 1 # AL98KV and the Alpha Systems AlphaThane 5121 Self-Leveling Sealant for RVs - Gray - 9.8oz - Qty 1 # AL45KV are good for use on TPO roofing and will allow you to re-caulk your roof accessories for a water tight seal. The only difference between these two sealants is that the 5121 has a longer drying time which will allow you more time to get it exactly how you want. Also, the # AL45KV is gray while the AL98KV...
    view full answer...

  • Dexter EZ Flex Kit that Fits Trailer with 35 inches Between Axles
  • Since you have a distance of 35 inches between your axles measured on center the EZ Flex you'd want is the part # K71-653-00 which has an axle capacity of up to 8,000 lbs. It will work great on your 3,500 lb axles.
    view full answer...