Risk Racing RR1 Ride-On Lift Stand for Dirt Bikes

Video Transcript for Review of Risk Racing Wheel Chocks - RR1 Ride-On Lift Stand For Dirt Bike - RR95QP

Hi everybody, Andy here with etrailer.com. And today we're gonna take a look at this Risk Racing RR1 ride-on lift stand for dirt bikes. Now, this lift is going to let you ride off of the track directly onto this stand without having to worry about possibly hurting your back in the process. Now, you're not gonna have to worry about any more lifting or grunting or trying to kick a motorcycle lift underneath your bike. Now, this is going to work with motocross bikes that range from 85cc to 450cc. And, unfortunately, I don't have a dirt bike in my studio with me today.

Typically, you're going to be using this on the ground or maybe on the floor of a, on the floor inside of a garage or a shop. But what I would like to do as best as I can while this is on my tabletop, is just to walk through the process of how easy this is to use with your dirt bike. I want to take a close-up view real quick on this end of the stand and show you that this does come with an included safety pin. So, you're gonna use this safety pin to keep it secure in whatever position you're gonna be using it in whether you have it flat or when, or whether you have it upright. This is going to be great to use when it's flat so you're not gonna have to worry about it unfolding or anything like that when you're transporting it.

And then I'll show you how to use that when you have this in the upright position. So to use this, you're simply going to ride your bike over this stand and when your front tire reaches this front plate, this lift is going to begin to rise just like that. And when that happens, you're gonna use your foot and push that pedal down all the way and then that is going to lift your bike off the ground. And then at that point you're just going to use the safety pin and run it through the hole right here. And then that's going to keep this in the upright position and you're not going to have to worry about that accidentally folding back down or going flat.

So, that's how easy this is going to be to use. And I want to put a photo on your screen just to kind of give you an idea of what your bike is going to look like when this stand is lifted up and it's lifting your bike off of the ground. Now, I want to give you an overhead look here and show you this riveted rubber traction top that's going to keep your bike from slipping off the stand. If you will notice there is an oil drain hole that's going to make changing your oil easier if your drain plug is on the bottom of your bike. I do want to point out that these rivets will not make contact with your bike.

They are down deep enough in the pad that the only thing that's going to be making contact with your bike is this very sturdy, durable pad. So, that's going to do a great job of holding your bike into place there. Now, I took some measurements of this pad earlier before our time together just to give you an idea of the size here. The overall length of the pad is about 9 3/4 inches long and the overall width is about 10 1/2 inches wide. Now, it's easy to get your bike lifted up on this stand and it's just as easy to remove. So, you're going to remove the safety pin here and then take your foot and just lift, put it underneath this pedal and lift your foot. And as you can see, that stand is going to come down just like that. And then you're just going to back your front tire off of the plate, turn it, and then just drive this off of the stand and you're ready to hit the track again with your dirt bike. Now, just to let you know what this is made out of. This is robust. It's very well built, very well designed, in my opinion. This is constructive, durable steel and it has a large, a large footprint that's going to give you a stable and sturdy stand. We have some rubber feet here that's going to give you some traction as well. And just to give you some overall dimensions while we have this flat to give you an idea of the size. The overall length from end to end, we're sitting at about 36 inches long. And then the overall width we're sitting at about 17 inches wide. And then the overall height, again when this is flat, is about 9 inches tall. Now, I mentioned that this does have rubber feet on the bottom but I would recommend checking out another item from Risk Racing and that is their factory pit mat. And you can see a photo of it there on your screen. This is going to be great, especially if you're going to use this stand on a shop or garage floor where maybe the floor is painted or polished and it kind of has a slippery surface to it. This pit mat is going to give you that added traction that you need so you can be confident that your stand is not going to slip in any way, especially when you're servicing your bike, this is going to be a great option for you to consider. So, on your screen, I am including our item number for Risk Racing's factory pit mat. You can just take that item number, put it in the search field of our website and it will take you to that mat. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.