Risk Racing ATS Magnetic Adjustable Dirt Bike Stand

Video Transcript for Review of Risk Racing Wheel Chocks - ATS Magnetic Adjustable Dirt Bike Stand - RR45QP

Hi everybody. Andy here with etrailer.com and today we're gonna take a look at this Risk Racing, ATS magnetic, Adjustable Dirt Bike Stand. The chassis for every dirt bike year, make and model, are designed a little differently, and as a result, not all bikes sit level, on a traditional dirt bike stand. The front or back tire will often touch the ground, when placed on a stand. And aftermarket skid plates, can also affect this angle, leaving the bike dangling low on one side or the other. This adjustable bike stand, is going to let you level any bike that you may have, to clean or service it.

The stand features these aluminum turn buckles, with lock nuts right here as you can see, that are going to allow you to get that perfect angle, and lock it into place. So let me see if I can give you a brief demonstration of that. So I'm gonna turn these turn buckles here, and as you can see, I am able to raise this, and you're gonna be able to raise this quite a bit. And then when you find that height that you want, you're just going to turn these lock nuts there. And then that's going to lock those, lock that height adjustment in place.

So this is going to be very easy to adjust. I'm gonna go ahead and loosen up my lock nuts here, get those out of the way, and then lower it. Let me turn it this way just so you can see. And as you can see, the top is lowering, and I'm gonna make, try to make that just a little bit even again, just like that. So it's gonna be very easy to use, very convenient, and it's going to let you get just that right height adjustment, that you we're going to need.

Let me give you an overhead look. I want to show you the top here. We have this rubber traction top. This is going to keep your bike from slipping off the stand. This top is chemical resistant.

It's thick, it's going to be hard wearing. And if you notice the bolts that hold this pad into place, sit just below the rubber top, meaning your bike is only ever going to sit on the rubber itself, and it's not going to make contact with these bolts. So that's a nice feature. If you notice there is an oil drain hole in the center, of this durable top plate, that's going to make changing your oil easier, if your drain plug is on the bottom of your bike. And just to give you the overall measurement of the pad, of the top here, as you can see, we're sitting right at 11 inches. So this is going to be 11 inches square. And then, taking a look at the side here, we do have magnetic sides. That's going to let you keep loose bolts, and parts within arms reach. So, I just grabbed some bolts, or some lug nuts here, that I found in my studio, just to kind of give you a demonstration of what that's going to look like. I've got my pocket knife here, so as you can see, it's gonna hold it in place. And on the other side here, you can put some smaller tools there, so you can keep 'em on hand. So, this is really handy feature, if you're needing to remove some bolts, or washers, or nuts, or something like that for a quick service, you can put 'em right there, and not have to worry about potentially losing those parts. This is a very durable construction. This is made out of a powder coated steel, so it's ultra durable. This weighs a little over 13 pounds, about 13 and a half pounds. And just some overall dimensions of the stand itself. The overall width at the widest point, we're sitting at about 16 and three quarters inches wide. The overall length, we're sitting at about 16 inches long. And then the overall height, when this is level, and you don't really have that height adjusted taller, we're sitting at about 17 inches tall. Now another recommendation that I would like to make to you, is the Risk Racing Factory Pit Mat. And I have an image of that mat on your screen. If you're going to be using this stand on a floor like a polished cement floor, and you're wanting a little bit of grip in between your stand and the floor, this Factory Pit Mat from Risk Racing, would be a great item for you to consider. It's going to give you that traction, that grip that you're looking for. So if you'd like to check that out as well, I do have our item number for that mat on your screen. You can just take that item number, and put in the search field of our website, and it'll take you to that mat, and you can add that to your order, if you so desire. Well, that's going to conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.