To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
BedRug truck-bed liner upgrades your Chevrolet Colorado bed with a rail-to-rail, 3/4" thick layer of tough polypropylene to cushion valuable loads and help keep cargo from sliding. Looks and feels like carpet but is more than rugged enough for heavy use.
Features:
Specs:
The BedRug truck-bed liner protects your fragile cargo and your vehicle's bed from life's bumpy roads. The 3/4" thick, carpet-like liner covers your whole bed - walls, floor, and tailgate.
A built-in hinge at the tailgate helps to prevent gravel, mulch, and other small objects from falling in between the truck bed and tailgate.
Haul furniture, pet kennels, electronics, and any other breakable or sensitive cargo using this cushioned bed liner. The non-slip surface helps to keep items from skidding around in your truck bed and suffering damage. Sliding cargo can also cause an uneven distribution of weight in the back of your truck. Steering and braking are more difficult if the load in your truck bed isn't evenly distributed. The BedRug helps to keep your load where you put it, giving you better control of your truck. The soft padding is also friendly to your knees when you're working in your truck bed or crawling around under your camper shell.
The BedRug works as hard as it plays. You can haul concrete, gravel, lumber, mulch, and more without harming your BedRug liner. Its UV-resistant surface can stand up to shoveling and other heavy-duty use. It even resists battery acid, oil, and bleach.
BedRug doesn't absorb liquids - water runs right off the waterproof foam - so you can hose it off, let it dry, and sit in it later for your tailgate BBQ. It also resists mildew and won't stain.
The BedRug's customized fit and simple, do-it-yourself installation mean that you get a smooth, snug liner for your truck bed. You can remove and reinstall factory tie-downs through the BedRug or just cut small slits so that they fit through the liner. The BedRug comes in five pieces that zip together and install with hook-and-loop strips similar to Velcro.
This liner is perfect for people who use their truck on the job and for fun. It lets you use your truck bed as padded seating at the beach or as safe transport for your antiques and collectibles. Pets love the soft lounging surface, and their scratching won't damage it. Haul a load of lumber in the morning, and then spread out a sleeping bag at night for some truck-bed stargazing.
Besides offering a high-end look for your truck compared to other types of bed liners, the BedRug offers a slip-resistant, cushioned surface to help protect what you carry in the back of your truck. Spray-on or drop-in liners don't offer the same level of shock absorption and skid prevention for your load.
BedRug installation doesn't require the surface-prep sanding that spray-on liners need, so it won't damage your truck bed's paint finish, and it can be removed later if needed. This means that you can install the BedRug quickly and easily - no need to pay someone else or bother with a service appointment.
Drop-in liners tend to scratch your paint finish as they vibrate in the back of your truck, and when water gets trapped between a drop-in liner and your truck bed, rust can result. The soft surface of the BedRug won't scratch your bed. And because BedRug doesn't absorb water and dries quickly, it helps to prevent rust.
Spray-in or drop-in bed liners can crack and fade, suffering the wear and tear of normal use. BedRug stands up to heavy-duty use without the surface degrading.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, Colorado owners. Today on your 2019 Chevrolet Colorado, we're going to be taking a look at and showing you how to install the BedRugs' custom-fit bed rug for your Colorado's truck bed. The bed rug's going to be a great way to protect the bed of your truck, just like with any other cargo liner. Whether it be a drop in or a spray in. Except this is also going to provide an extra layer of cushion. So if you have certain objects that you like to haul but they're a little more sensitive, this is going to be a great option to get it transported safely to your destination.And while this is great for those more sensitive items because it gives you a soft surface, don't be afraid to use it like a regular truck bed.
It's a carpet-like material but is extremely durable. So you can go ahead and throw wood back here, throw in some mulch and use your shovel and just dig right in and scoop it out. You're not going to tear this.And if you're worried about what's it going to look like when I throw some dirt and mud back there Well, just like your truck bed and any other liner, you can spray it out with a hose and clean it just like those. It's made as a anti-absorption fabric, so it's not going to hold and absorb water. So it will dry quickly so it's not going to mildew.It's custom-fit to the contours of your Colorado's truck bed, so it's going to drop right in and it's going to look great.
You can see how it just forms and molds right to it. You can even see the brace pillars on the side as it's molded around those factory ones underneath.If you're installing this for more sensitive items, or really doesn't matter what you're putting back here, but you want to protect those items as well, so it goes great with a tonneau cover. We have tonneau covers available here at etrailer.com so you can get a stylish carpet in the back with a stylish tonneau cover on top. It's also great for camper shelves, especially if you like to spend some time back here tailgating.Now that we've gone over some of the features, let's go over the installation together so you can have the confidence to do it at home. We'll begin our installation by cleaning out our truck bed.
You'll want a clean surface to work with when putting your carpet in. I've already got ours cleaned out so we're ready to start putting the carpet in.We'll then take the hook and loop fasteners that come in our kit and attach it to the underside of our carpet. The instructions lay out where to place these, but it's pretty obvious for the most part. The long one is going to go on the outer edge here, and you will have to trim this to fit. And there are going to be several small ones that you'll place on the one that's towards the inside.
We'll also have a couple here that'll run down as well. Those all just push in place.We're going to do the same thing with our side pieces. So put all those on as well. For the side pieces that run down the truck bed rails, you'll find some small markings to help you position those. It's kind of just like a little indented line there and that'll help you position your small pads when spacing them apart.We can now zip the two pieces together. This'll be easier if you do it just outside on the floor in your garage. Line up the ends, slide them together, and then just run the zipper down. Just take your time going around the corners. It is going to be a little bit difficult to make that turn. We can then flip it inside out and set it inside the bed.Once you've got it positioned in there, take one side and peel it back, exposing our adhesive. Peel the adhesive backing off of it. Then we can roll it down into place, making sure it stays all the way up against the cab there. Then you can stick it down. You'll then want to hold it in place for about 15 to 20 seconds to ensure a good adhesion.We're now going to repeat this for all the remaining adhesives. We're going to start working our way from the center and then work our way out. So underneath here at the bottom first. Then we'll do our back, our sides, and work our way towards the back. If they don't line up properly, just peel your hook and loop off and move it over until it lines up with a flat surface. We've got all of ours lined up pretty well, so we're just going to pull all these off and then stick it in place.On the sides, when you get towards the top, we're going to be tucking it under the rails. And now you do have the option here if you have a tow hook, you can make a slit in the fabric to poke it through if you so desire. We're going to repeat that on the other side as well. And then we'll repeat that same process when we get our way down here to the tailgate. With our tailgate stuck down, we can then close it and make sure everything fits properly. And that completes our installation of BedRugs' custom-fit bed rug for your 2019 Chevrolet Colorado.
Average Customer Rating: 4.9 out of 5 stars (37 Customer Reviews)
BedRug truck-bed liner upgrades your vehicle bed with a rail-to-rail, 3/4" thick layer of tough polypropylene to cushion valuable loads and help keep cargo from sliding. Looks and feels like carpet but is more than rugged enough for heavy use.The bedrug is a great product. Love the price & the ease of the installation.
Great product. Great fit. Packaging was less than expected
These are excellent, wish I would have bought one years ago. I have a cap on the back and this makes it nice and comfortable for truck camping as well as holds up for hauling items and keeping them from sliding around. Will definitely be in every truck I buy going forward.
Fit remarkably well. Even though manufacture didn't recommend trucks with 5th wheel package. I made some adjustments to fit my gooseneck tow package. I like the way it looks and feels.
Fits great, my stuff doesn't slide around and has held up well.
The product is high quality, durable material. It fits well and is made with precision. Delivery was timely and it was well packaged. I found lots of detailed instructions and a video online, including the brief installation instructions in the box. It was important to have carefully reviewed all of these before starting installation. This install took a lot longer than expected in order to meticulously follow all instructions.
The problem I have is with the velcro adhesive tape used to hold the Bedrug to my Honda truck bed. I followed every direction very carefully to the letter. Despite all my efforts to ensure the tape would attach properly, several of the white-backed tape strips, particularly the long edges at the tailgate and in-bed trunk failed to completely adhere. Both have been peeling up and been a total pain to keep in place. Also, the sidewall needs additional attachment points around the light cutouts and power outlet access door to remain secured. The kit should have only the high strength (Red) tape for a better installation.
This has been my third BedRug that I have installed in my trucks, as always the fit and finish is perfect! I think this is the most versatile bed protector on the market. I would recommend BedRug to anyone in need of a bed protector.
I love it, easy to install, looks good, easy on my old knees, easy to clean an keeps things from sliding around the bed, I highly recommend it!
I love this bedliner. It’s very easy on the knees I can climb around in the back of the bed and it’s great.
I have hauled dirt and bark. I do put a tarp down but it never catches all of it. I just get most of it out and then get the vacuum out and clean it up. This is the only liner I will ever put in the back of a pick up again
For this truck, I wanted to try something different from the usual hard plastic bed liners or the rough spray-in products. Initially, I'd thought of just a rubber bed mat... But then I discovered the BedRug full bed liner. This product provides a real high-class look, while being durable when necessary. It's a great addition to the retractable hard cover we have also installed!
The directions that came with the product were useless, Youtube to the rescue. The fit was not as good as I had hoped, there were wrinkles on the sides, and there are places where the sides zip together that liquids will be able to get underneath the bed rug. I am concerned that the zippers may rub the paint off the floor of my truck. I do like that the rug covers the gap between the floor and the tailgate when the tailgate is open. I am not impressed with the product and would not recommend to anyone.
Delivery took only a few days, price was better than my local truck accessories shop. I have a BedRug on my 2012 F150 and I love it. Have yet to install this on my F350 but I'm sure it will be as good as the first. It definitely makes camping in the bed much more comfortable. It also makes loading and unloading the bed easier on your knees. Thanks eTrailer.com!!
Great product! Had one in my previous truck. Easy to install, looks great, optimal protection & easy on the knees when crawling around inside the bed. Wouldn't consider putting anything else on my truck bed! Professional, courteous & quick shipping from "etrailer" was a bonus. Will continue purchases from them in the future!
The staff @ E-trailer did an excellent job keeping me informed of the order status and delivery status of all the items I ordered. The items all came in in great condition and functioned as they were suppose to.
Other than replacing a couple of velcro supports, the bed liner is great!
I have been very pleased with this product. It lives up to the description of the product on their website. I would definitely recommend this product to a friend. I have used this in my truck to haul kayaks, firewood, and supplies and it still looks like new. Thanks
Greg
it went very smoothly. i never thought it would go as easy as the video , but i was pleasently surprised just how easy it was! being as my truck has a cap on it with windows, i am doing a little modification to "conceal" my stuff in the back of my truck. when i am done , i will send you pictures! thank you again for everything!
Great people to work with. I dealt with Jake Hermann. He was extremely helpful and made sure it was all installed correctly. Fit like a glove.
This is my fourth Bedrug—love the great KNEE PADDING in the truck bed floor—for my NEW KNEES! Great sound abatement too!
Great product, not to hard to install, I've done 3 of them so I am getting faster at it...I love having this in my trucks as it keeps things clean and not sliding around...highly recommended.
I'll never own another truck without one! We absolutely love it and it was simple to install (pro tip: install prior to a couple HOT days so the wrinkles it has from being packaged smooth themselves out)
Great product, quality material and it fits like a glove. A year later and still looks like new.
had this in my previous Tacoma, so happy got it again for my new Tacoma.
Awesome product, awesome fit!
Excellent product...very happy with it....exceeded expectations
Do you have a question about this Truck Bed Mat?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lavern H.
10/5/2018
My bed rug still looks like new yet. Its holding its shape & the fasteners are keeping it in place. LOVE IT !!!