Corrosion-resistant, 14" steel wheel features a 5 on 4-1/2 bolt pattern and meets Department of Transportation standards.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this Dexstar blue steel conventional trailer wheel. Now this sturdy steel wheel is made here in the USA. (steel clanging) And as you can see, it features this dark blue finish with a conventional design. And hopefully you can see, I know it's a little bit dark with this finish, but inside the center here of this wheel, we do have this ring with these nubs here that's going to allow you to pop a cap over that, over the center there.
And this does meet DOT specifications. And this wheel's gonna have excellent corrosion resistance with this dark blue finish. Now lemme go ahead and get my tape measure here and give you some measurements. So, looking at the diameter, and I am measuring bead seat to bead seat, so where the tire is actually going to meet the wheel. So measuring that bead seat to bead seat, as you can see, we are sitting at 14 inches in diameter.
And then again, measuring bead seat to bead seat, so that's gonna be from here to here where that tire is going to sit in there, we are sitting right at 5 1/2 inches, so 14 inches in diameter, 5 1/2 inches wide. Our pilot diameter is 3.19 inches. And on our bolt pattern, this is a five on 4 1/2 inch bolt pattern. And in case you don't know, the first number in the bolt pattern is the number of bolt holes. The second number is the diameter in inches of the circle on which those bolt holes sit.
So, to determine the bolt circle diameter on wheels with an odd number of bolt holes, as we have here, you're simply going to measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. The wheel stud size is 1/2 an inch by 20. This wheel has a capacity of 1,870 pounds. So, if you are looking for a conventional trailer wheel with this dark blue finish, this is going to be a great wheel to consider that meets the capacity and the bolt pattern and the size that you're looking for. Well, I think that's going to wrap up our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thanks for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.