Summer Starts Here - Save up to 70%
Leaf-spring mounting hangers include 4-1/4" tall front hangers, 3-1/2" tall center hangers, and 5-1/4" tall rear hangers. Equalizers, shackle straps, bolts, and components for mounting axle to springs sold separately.
Features:
| Leaf Springs | A - Distance Between Front and Center Hangers | B - Distance Between Center and Rear Hangers | C - Distance Between U-Bolts | D - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|---|---|
| SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) | 28-3/4" | 28-3/4" | 33-1/2" | 5-1/4" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
| SP-160275 (E5226) | 29-3/4" | 29-3/4" | 34-1/2" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
| SP-161275 (E5115) | 32-1/2" | 32-1/2" | 36-3/4" | 4-3/4" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a look at these Tandem Axle Trailer Hangers for your two inch Slipper Springs. These leaf spring mounting hangers are going to attach four two inch slipper leaf springs to your trailer frame. And they are designed for use on trailers with Tandem 3,500 pound, to 8,000 pound axles. Now on this product page, there is a table that you can use to determine the hangar location, based on the type of leaf springs.
And these hangers will achieve a four and three quarter inch, five inch, or five and a quarter inch clearance between the trailer frame and axle, depending on your axle size. So this is going to include two front hangers, two center hangers, and two rear hangers. Let me go ahead and retrieve my ruler, and just give you the measurements of these hangers. So measuring the front hangers first, we're gonna be measuring from the center of the bolt hole to the top of the hangar. So as you can see, our front hanger measures right at four and a quarter inches.
And then our center hanger, we are sitting right at three and a half inches. And then finally, our rear hangers, again from the center of the bolt hole all the way to the top. We are sitting right at five and a quarter inches tall. Now, equalizers, shackle straps, bolts, and the components that you're gonna need for mounting your axle to your springs are sold separately. That's gonna wrap up our look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Leaf-spring mounting hangers include 4-1/4" tall front hangers, 3-1/2" tall center hangers, and 5-1/4" tall rear hangers. Equalizers, shackle straps, bolts, and components for mounting axle to springs sold separately.Very impressed with my entire order!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.