Single-Axle Trailer Hangers for Double-Eye Springs - 3-1/4" Front, 7/8" Rear

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Hangers - DX54CR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexter single axle trailer hangers for 1-3/4 inch wide double eye springs on 2,000 pound to 7,000 pound axles. Now, this hanger set here will include the 3-1/4 inch tall front hangers and the 7/8 inch tall rear hangers for mounting your springs to your 2,000 pound to 7,000 pound single axle trailer frame. It includes the two 3-1/4 inch tall front hangers. And when we say the height, when you measure the height, it's not from the bottom to the top, it's measured from the center of that bolt hole to the top. So on this one, if we take our ruler and we go center to the top, you can see there's your 3-1/4 inch measurement for the tall front hangers.

On the rear, it's the same way. You don't measure overall top to bottom. You'll measure center where the bolt hole goes to the top. So in this if we do it is right about 7/8 inch tall rear hangar. Does have the steel bushings in it you can see.

Now, the shackle straps, the bolts, and the components for mounting your axle to the springs are sold separately. This will attach two 1-3/4 inch wide leaf springs to your trailer frame. And I do recommend to use the table that's listed on the product page of this part number and it'll help you determine the hangar location based on the type of leaf springs you're using. These parts here will achieve 4-3/4 inch or 5-3/8 inch clearance between your trailer frame and the axle depending on your axle size. But that should do it for the review on the Dexter single axle trailer hangers for the 1-3/4 inch wide double eye springs on 2,000 pound to 7,000 pound axles.

.