Summer Starts Here - Save up to 70%
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (LM501349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, Steve here with etrailer.com. Thank you for joining me today while we take a look at this Ag Trailer Hub assembly for 7,000 pound rated axles with the six on six lug pattern. Now this trailer hub assembly, like I said, is for ag purposes, so like your farm trailers, that kind of stuff. You can see here it's got a nice built-in grease circ fitting. That's gonna make, you know your lubrication and your maintenance really easy as far as re-greasing those periodically. You will get the grease seal, the cap, the inner, and the outer bearing and the races.
You can kind of see 'em there, they're already pressed in from the factory, which is really nice, you don't have to worry about pressing them in or having to press to get 'em in there. Again, it is for 7,000 pound axles agricultural spindles. You could use this on your TRP spindle, part number SP-356200-130. It does have a speed rating at 20 miles per hour and a capacity of 3,500 pounds. Again, it is a six on six lug pattern.
You're gonna get the wheel studs and nuts already pre-installed as well. The pilot hole back here is 4.62 inches across, and the grease cap flange diameter is 2.44. So that's gonna fit on this side, the outer side here. Now it will have an offset of 1.12 inches. And as far as your bearings, like I said, they're included.
Your inner bearing, that's the bigger one that goes in first. That is part number LM501349. It's got a diameter of 1.625 inches. Your outer bearing the smaller one, that's part number LM 67048, and it's got an inner diameter of 1.25 inches. Again, your race is already pressed in and those part numbers, you can find them on the website or engraved in the race itself.
Grease seal again is included as well. It's right here and the inner diameter is two inches even and the outer diameter is 3.066 inches wide. Well, that's gonna do it for our look today at your agricultural trailer hub assembly for your 7,000 pound axle with a six on six lug pattern. I'm Steven with etrailer.com. Stay safe out there on the farm.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.