Summer Starts Here - Save up to 70%
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (JL69349) and race, outer bearing (LM67048) and race, grease seal, grease cap, and threaded wheel bolts are included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a brief look together at this agricultural trailer hub assembly. Now, this hub is designed for use on your 7,000 pound trailer axles with agricultural spindles without brakes. On your screen, I am including the model numbers of the TRP spindles that this assembly is going to work with. So this is going to be a great assembly to consider for your farm trailers. And as you can see right here, we do have a grease Zerk fitting that's going to make for fast and easy maintenance and lubricating.
We have these six 1/2-inch by 20 threaded wheel bolts that are included and also the grease seal, the grease cap, and the bearings are gonna come with this assembly. And on your screen, I am listing the information about the bearings and the races and the seal. The races are pre-installed into this assembly, so you can see the races here. But as for that inner bearing that we have right here, as we have engraved on the bearing itself, maybe you can see that there. This is going to be a JL69349 inner bearing.
It's gonna fit into place right there. And then for our outer bearing, as we have engraved there, this is an LM67048, and that'll fit into place right there. And then the grease seal is AG-GS-25661625SL. And then I have the race information there for you as well. And again, those races are pre-installed into this assembly.
And the bolt pattern is a six on six inches. And in case you don't know the first number in the bolt pattern, is the number of bolts that we have here. And then that second number is the diameter in inches of the circle on which those bolts sit. So to determine the bolt circle diameter on an assembly with even numbers, you're just going to measure from the center of one bolt to the bolt directly across, and that'll give you that measurement. The weight capacity at 20 miles per hour is 3,560 pounds.
The pilot hole diameter is 4.62 inches, and the grease cap flange diameter is 2.446 inches. And this has an offset of 1.12 inches. Well, I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.