To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (191 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.I purchased this hitch for my '16 Subaru Crosstrek. It arrived quickly and install took about 30 minutes. As you can see in the photos, it looks well integrated (not like an add-on). Using it with a Yakima Holdup bike rack.
Very pleased with the customer service from etrailer.com. A friend recommended to me and I will do the same.
:-)
Hitch fit just as indicated. A bit of a pain enlarging holes but fortunately it was accomplished using a drill and boring tool. Whoever came up with the jig to pull the bolts through the holes is a genius. To anyone installing this or a similar hitch just “READ” and follow the instructions. Was able, though a bit tough installing by myself. Good luck torquing the bolts.....was able to get the forefront bolts to but getting the torque wrench on the back bolts was impossible, using a good socket wrench was the best I could do. On to the lighting assembly.....
Ross
6/25/2019
Great, used it for a new bicycle rack. Worked great. Thanks
Installation was a little tricky, doing it by myself without a lift. I used pieces of bicycle inner tube on the bolts to help prevent them from slipping back into the frame rail. Once I secured the nuts, I removed the inner tube pieces and carefully put the spacers in. All went good.
My wife and I installed this on my her Impreza 5-Door so that we could use the Thule TH990XT to carry our bikes. Installation requires us to enlarge two holes in the subframe. After that, the installation was extremely easy if you have two people working on it. The hitch receiver looks great and does not stick out beyond the bumper at all. We don't even notice it when the bike rack is not on there.
This hitch fit our 2013 Subaru Impreza Sport perfectly. Watching the video of this hitch being installed was very helpful. I watched the video several times during the installation process to make sure I was doing it properly. I backed the rear wheels onto car ramps to create an adequate working space. My only suggestion would be to make the 1/2" bolts a little longer to make threading the nut on easier.
The hitch arrived quickly from etrailer! I purchased a discounted model with a few cosmetic scratches on it? Guess what the scratches are hidden by the bumper of my 2014 Subaru XV Crostrek! Install took approximately 60 minutes. The paper instructions weren't easy to understand, but after watching the install video from your site, a couple of times it went smoothly!
I have also purchased the Swagman Chinook 2 bike platform carrier to be installed soon.
The hitch install took me a couple of hours including gathering all the tools, and waiting a bit for the touch up paint to dry around the enlarged holes. It was very easy and I was able to do it by myself. The complaint I have is someone at etrailer put their sticker upside down on hitch.
Easy installation. The fish wire worked great! I had my doubts at first.
This will make transporting my bicycles a piece of cake.
P.S. I installed the hitch on a Crosstrek Hybrid, fit perfectly.
What a great hitch and heavy duty.
I use it for a bike rack and it keep the bikes far from the rear door as the hitch is flush with the bumper.
It only took about 1 hour to install.
The hitch was an easy install. My friend JP did not believe the fish method would work. He changed his mind. The install took about an hour. Works great with my bike rack. Will recommend to others.
Good price, shipped right away. A mechanic friend installed for me, though I could have muddled through myself and bashed a knuckle or two. It has worked perfectly! No complaints, completely satisfied with the product. My picture isn't of the hitch, but what it allows :)
Very satisfied with the product! The installation was as easy as it looked on your [online] videos (which are really helpful by the way)! Delivery Time was great as well.
Thanks for a job well done!
easy install, just be sure you have the correct brackets with the correct sized bolts! (The ones that go inside the frame rail) There are two different sizes.
A friend of mine helped me install the hitch on my car, and it installed just as the directions and video indicated. Though it was tricky at times, the video was very helpful and I am very happy with the product.
Great instructions, good quality, but a huge pain to install if you have any sort of aftermarket exhaust. If you have an aftermarket exhaust where the tip is extended beyond the normal tip length, I highly recommend taking the exhaust off before you try to install it. It fits with my Borpa 11843 axleback but it may not fit at all with a different one.
Bolted up great. Did it by myself in under 30 minutes. And customer service was great. I ordered the wrong one to start with and they helped get the correct one for me!
Prompt shipping, great product and thanks for including items to help make installation easier.
Hitch was a great addition to my car. Use for bike carrier, easy to install and instructions were spot on. etrailer's customer service was outstanding and would purchase other product when needed.
Evk
10/4/2022
Hitch is working out great. Quality product.
Easy install, very nice to use, highly recommended for the price.
Super easy to install. Minimal amount of filing/drilling necessarily. Self install took about 25 min start to finish.
Had the local repair shop install the hitch. Cost less than $100. It's barely visible from the rear. Holds our bike rack steady. Very pleased with the hitch, the price, the prompt delivery and the courteous service from etrailer.
A. D.
10/11/2018
Absolutely no problems after a year of use. Very pleased.
No surprises, very quick and easy purchase and shipping
Loved the directions and video for installation. The pull wire was great but I used a piece of looped electrical wire to help grab it through holes to save time. I used a cooler to sit the hitch on which made it very easy for me to start the nuts on the back bolts. A great custom fit which made the job easy enough for one person at 40 - 50 minutes.
Stepheng
3/5/2017
very happy with hitch
The packaging was excellent! It took about an hour to install on my 2014 Subaru Impreza sport wagon. I couldn't be happier with the fit and sleekness, it's hardly noticeable. Now, you will see bad reviews on this hitch but I would say the majority of them are because the instructions weren't properly followed. You must pay attention to the (bolts and spacers) hardware that's included, their not all the same size!
R L.
3/7/2018
Still great after a year. Solid hitch, highly recommended!
I used a dremel tool to expand just two corners of the holes on the car frame instead of making the entire holes larger. The point is to get the plates and the bolts through it, so it's not necessary to make the entire hold larger. Kind of like o->{} instead of o->O.
After getting the bolts in place, I used a bunch of strong magnets to hold them there, just so I don't accidentally push them back in while putting the hitch in place. Remember there are two different sizes of bolts/nuts/fish-wires.
Everything went smoothly until the last torque'ing part. There's barely enough room on the left side (without the exhaust pipe) to make this happen. On the right side, it's practically impossible without lowering the muffler. I got the left side exactly at 110/70 ft-lb, but I had to wing it for the right side. That's the only reason I knocked one star off.
All in all, I managed to do it all by myself and it looks nice. I like how it points up ever so slightly, too.
Richard L.
5/31/2016
Hitch has been great. The rear-end of the car sagged with any load on it, so I swapped the rear springs with stiffer, but still standard height, ones made by King Springs. The car is perfect now.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Trysh
8/7/2017
Still vary satisfied with the hitch. I use it mostly for attaching my bike rack. Even bought a Subaru cap to put on it when not in use.