Roadmaster Stop Light Switch Kit - Chevrolet Malibu w/ Adjustable Pedals

See what our Experts say about this Roadmaster Tow Bar Braking Systems

• Parts Needed to Flat Tow a 2009 Saturn Aura
  If you are under the 3,500 lb capacity of the hitch you have on your 2002 Fleedwood Tioga, even just by a little bit, you should be fine. You will want to verify the weight of your vehicle though at a weigh station just be sure that the advertised curb weight is accurate. Also, you will need to make sure you don't ever load any cargo in the vehicle when you are flat towing it as that would put it over the 3,500 lb mark. For a base plate kit for your 2009 Saturn Aura you would want the...
  view full answer...
• Parts Needed to Flat Tow 2007 Saturn Aura
  According to the owner's manual, a 2007 Saturn Aura can be flat towed so long as the vehicle is facing forward and it is run for five minutes before being towed and during each RV fuel stop. You'll also need to pull fuse "IGN SENSOR" to prevent the Saturn's battery from draining. There are a number of parts you'll need in order to flat tow your Aura, starting with base plates. The Roadmaster EZ # 523145-1 are a confirmed fit, and I recommend using the Roadmaster Falcon 2 tow bar # RM-520...
  view full answer...
• Accessing Brake Stop Lamp Switch to Flat Tow 2007 Chevy Malibu
  I'm assuming that you're wanting to flat tow the vehicle. Rather than using the # RM-88400 on the 2007 Malibu, Roadmaster instead recommends using the stop light switch kit, part # RM-751210 if the vehicle has the optional adjustable pedals or # RM-751210 if the vehicle does not have that option. According to the owner's manual, before flat towing the ignition sensor fuse needs to be removed. The fuse is located on the passenger side of the center console in the location shown in the photo...
  view full answer...
  
• Availability of Roadmaster Stoplight Switch for 2004 Chevy Malibu With Adjustable Pedals
  We do indeed carry the stoplight switch for a 2004 Chevy Malibu w/ the adjustable pedals. The part number is # RM-751210.
  view full answer...
• Base Plate and Tow Bar Recommendation for a 2011 Chevrolet Malibu
  Of the base plate options that fit your 2011 Chevrolet Malibu I recommend the Roadmaster EZ base plate kit because the installation will be a little easier and will not require you to remove and reinstall the headlights. The EZ base plates are compatible with all Roadmaster tow bars. The Falcon 2 Tow Bar, # RM-520, is our most popular Roadmaster tow bar. Along with a base plate kit and tow bar, you need safety cables, tow bar wiring and a supplemental braking system to complete your flat...
  view full answer...
• Parts Needed to Flat Tow a 2008 Chevrolet Malibu with a StowMaster Tow Bar
  To flat tow your 2008 Chevy Malibu with a Roadmaster StowMaster tow bar, you will first want to add a set of base plates. Since you will be using a StowMaster tow bar, I recommend installing the Roadmaster EZ Base Plate Kit, # 523145-5. The Quick Disconnects, # RM-222, are required for the StowMaster tow bar to connect to the base plate. If your StowMaster tow bar does not have the vehicle side Quick Disconnects, then you will need those as well. I also recommend checking your owners manual...
  view full answer...

Do you have a question about this Tow Bar Braking System?