To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed specifically for heavy-duty applications, direct-connect brackets install onto your Honda CR-V's frame to provide attachment points for a motor-home-mounted tow bar. Front arms are easily removable when not in use.
Features:
Note: Direct-connect base plates will work only with the Roadmaster tow bars that slide into a trailer hitch, such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, and Falcon 2. These base plates will not work with tow bars that require a hitch ball.
Direct-connect brackets do not require a crossbar because of the heavy-duty nature of your vehicle's frame. Thus, installation is simplified, the hookup process is faster, and the total appearance is enhanced.
Note: The EZ Hook safety cables included with Roadmaster's Sterling tow bars will not work with direct-connect base plates. These cables connect to an anchor plate on the Quick Disconnect crossbar, which will not be present when you are using these base plates.
The drawbars, or front arms, on the direct-connect base plate kit are simple to mount and remove, easily securing with pins. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Average Customer Rating: 4.8 out of 5 stars (386 Customer Reviews)
Designed specifically for heavy-duty applications, direct-connect brackets install onto your vehicle's frame to provide attachment points for a motor-home-mounted tow bar. Front arms are easily removable when not in use.This whole system is great!!! Even being a female, it takes less than a minute to connect or disconnect, just a couple of small receivers stick out of the front of the car. And they are removeable when not towing. My brother even bought a set for his Class C. It is difficult to back up in the Class C, IT is ok as it is quick to disconnect, so no worries.
I have it it over a year now and preforming flawlessly!Install went well. this so much easier than when I was using a tow dolly. flat towing is really the only way to go
I was able to install this with the included instructions and video. I thank the company for checking on me one year after I purchased it. I would definitely shop at e-trailer again!
This was a perfect fit for my 2005 Honda CR-V. Easy installation
Great service - fast ship and complete order arrived together. Not your issue - but Roadmaster should label braces R and L or DS and PS. I had to call their technical line to clarify as they are very slightly different. I asked their tech assist guy to please have then include a photo in instructions to identify the correct installation sides.
Kathy G.
4/12/2023
About 8K tow miles and very happy with our roadmaster base plate and hitch.
install was easy with simple tools.. it fit perfectly without any modifications.
Very easy install on my 2005 CR-V. It sit's nicely tucked into the grill. I did not have to any cutting. It makes your CR-V stronger by replacing a thin frame piece with strong steel crossmember.
Everything lined up nicely - no holes to ream out and no banging on stuff to make it fit. The paper instructions left me unsure about the placement of a bolt, but the video cleared it all up.
Our CR-V looks almost stock with the adapters removed. Good product! Entire installation took about two hours.
Matt
12/5/2021
No worries. I install the tow bar and go.
Very solid and relatively easy to install. However the directions were written by lawyers rather than mechanics. The two side plates look almost identical but are different, and the directions do not say anything about this or advise how to tell them apart. Pictures in the instructions could be larger. This item was installed on a 15 year old vehicle.
etrailer did their part - good pricing and fast delivery. Their website can be difficult to navigate but help is available by calling. The installation video is excellent, and is what convinced me to buy this and to install it myself.
James
4/18/2021
The baseplate is sturdy and fit the holes in the frame. Once I accepted that the front license plate needed to be relocated, installation took about a day. In addition to the baseplate itself, the safety cables and brake wiring need connection points, which result in more holes in the grille. The design of the baseplate ignores the fact that wiring connections from RV to tow are needed - having a mount for the wiring plug would have been a big help. We have towed several thousand miles with no problems with the baseplate.
Very detailed instructions for installation on 2005 Honda CR-V. A couple of minor discrepancies as in number of bolts to remove on bumper, but easily handled. Fit perfectly with ZERO trimming of bumper. THANKS!
Everything fit good. Instructions were clear. Have not had time to enjoy product much but when I did It all worked well.
Installed easily and works as it should
Priced right
Installed easily. Can't wait to use it.
I installed the Roadmaster MX Direct Connect Base plates on my 2001 GMC Yukon XL myself. To ensure I could measure torque with the basic tools I own, I did have to remove all the front body parts like bumper, grill headlights, air dam, etc. I was a little disappointed that two of the horizontal Roadmaster pre-drilled holes did not accurately lined up to the factory horizontal holes in my frame ends. I had to use a drill bit to elongate the holes abount 1/4 in to get the 1/2 in mounting bolts through. Then torqued everything to 56 lb-ft with red threadlock on bolts, nuts. I've towed this 6K lb Yukon since last September, about 9,000 miles on trips and the braces themselves are rated at 8K each, so it's held up well. I did have to work with Roadmaster tech in Wash State to ensure I ordered the correct part numbers as etrailer seemed less certain. But etrailer did provide the parts on time and packaged reasonably well as they're not lightweight items. The rear-most mounting bolt requires the installer to drill a 13mm hole into the cross member connecting front frame box rails. Measure twice, drill once.
Excellent service -- ordered online afternoon of July 13; shipped same day and arrived two days later. etrailer video was helpful in outlining steps for installation - especially fascia removal prior to actual install. Installation took about 3 1/2 hours which includes fascia/grill removal and reinstall. Did need to secure additional fender clips to reinstall fascia - many broke during removal as almost 20 years old -- available aftermarket from Dorman. Order arrived correct with all parts/no damage. Fit was excellent. Will order from etrailer again
Really easy install. This is my 4th vehicle I've installed a base plate on so I already had a good idea of what was going to happen. Instructions say the bumper stays on but six 10mm, two 7mm bolts and 4 plastic retainers and you have a ton more access with it off. Everything bolted up real nice.
I originally purchased a Blue Ox baseplate to install since I already had a tow bar. Upon removing the front grill, I was surprised to find the used Element I had purchased already had the front bumper caps removed and 2 braces installed. Thanks to the photos on etrailer reviews and product info, I was able to determine that the vehicle had previously had a roadmaster baseplate installed! I purchased this unit and it fit perfectly onto the already installed braces. Seems very solid and high-quality so far.
The coupling pin point end up being too low relative to the ground. . Therefore to remain within the required 3 inch horizontal limit for the tow bar, a 6 inch drop must be added to the towing vehicle. This creates a significant problem for a motor coach. On rises and falls of the road surface ( speed humps, etc.), the drop of 6 inches creates a rub condition between the drop hitch, safety cable, brake air lines and the road surface. If the adapters where engineered to be extended and the pin coupling points were raised 3-4 inches, the problem would be solved. It appears this designers considered aesthetics more than integrated functionality. Other than the fact that I must disconnect the tow vehicle, remove the tow bar and remove the drop hitch to traverse forward in situations and on many occasions , it is a functional base plate.
Easy install, remove factory tow hooks slide new brackets in, mark and drill 2 half inch holes for each bracket install and torque all bolts, simple install quality Roadmaster product with excellent workmanship.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Troy
8/15/2023
Everything I have bought at etrailer has been spot on. Great service. Always happy with the fast shipping