Summer Starts Here - Save up to 70%
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. And today, we're going to take a look at the zero to 150 PSI digital tire inflator. Now, when you hook an air line up to this inflator and then clip this hose onto your valve stem, this tire inflator will air up your tires just by squeezing this trigger. It is a 14 inch long hose. And as I mentioned has this clip on chuck that you can put onto the valve stem.
Clip it on there and it'll lock it into place. Now, this inflator will measure your tire pressure from zero to 150 PSI on your LCD display right here. And I want to zoom in just to show you what that display looks like. Basically, it has two buttons underneath. The blue one is a light button.
So if it's at night and you need to read it, you can push on the light. Push it again and it'll turn the light off.The other red button is the unit button. So once you push the unit selector, you can see it'll zero out. It'll show PSI. If you want to change the reading from PSI, you push it again.
It'll go to BAR. Push it again, it'll go to KPA. And push it again, it'll go to kilogram force per square centimeter reading. And then, again, it'll go back to the PSI.Now, if you do want to turn it off you just hold down on that red button. It'll turn the system off.
Now, this is accurate within 0.5 PSI. Right here it has this built in pressure release button that you can push to lower the pressure. So basically, if you air it up and you go over the air pressure, you can just push this and bring it down to where you want it to be. And you can see it is a nice back lit blue LCD display. We'll zoom back out.Now, it does come with two AAA batteries. They're installed back here to power your display here. Comes with the quarter-inch male inlet down here that your air hose or air line will connect to. A nice little feature it has is right next to the air line. If you unscrew this knob here and pull it all the way out, it's an actual valve core removal tool. You can put that into your valve stem and remove the valve core if need be. And if you're not using it, just go ahead and screw it back into place. But that should do it for the review on this zero to 150 PSI digital tire inflator.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.