bing tracking image
  1. Roof Basket
  2. Inno
  3. Small Capacity
  4. Square Bars
  5. Aluminum
  6. Cargo Basket
Inno Shaper 100 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 41-7/8" - 110 lbs

Inno Shaper 100 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 41-7/8" - 110 lbs

Item # IN569
Retail:$269.99
Our Price: $242.99
You Save: $27.00
Roof Basket
Shipping Weight: 23 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Clamps to square crossbars. Great Prices for the best roof basket from Inno. Inno Shaper 100 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 41-7/8" - 110 lbs part number IN569 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Photos

Inno Roof Basket - IN569

  • Small Capacity
  • Square Bars
  • Inno
  • Aluminum
  • Cargo Basket
  • Short Length
  • Silver

Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Clamps to square crossbars.


Features:

  • Cargo basket lets you transport gear on the roof of your vehicle
    • Keeps wet, soiled, or oversize gear out of your vehicle's interior
    • Maximizes your vehicle's cargo-carrying capacity
  • Aerodynamic, low-profile design helps reduce drag and wind noise
  • Tapered side walls and flat cargo area make it easy to load and unload gear
  • Easy, clamp-on installation to square crossbars
    • Mounts around bars with hand knobs and brackets
  • Rustproof and lightweight anodized aluminum construction
  • Silver powder coat finish resists corrosion


Specs:

  • Application: square crossbars
    • Minimum crossbar spread: 20"
  • Minimum crossbar length: 50"
  • Weight capacity: 110 lbs
  • Dimensions:
    • Exterior: 46-5/8" long x 41-7/8" wide x 3" tall
    • Interior: 41-3/8" long x 39-3/8" wide x 2-1/8" tall
  • Interior leg mounting dimensions:
    • Inside mounting position: 36-3/8" or more
    • Outside mounting position: 36-3/8" or less
  • Carrier weight: 17.4 lbs
  • Limited lifetime warranty


The Shaper 100 cargo basket is a lightweight option for transporting gear on your roof. It maximizes your cargo-carrying capacity, and it keeps damp or dirty gear out of your vehicle's interior. The aerodynamic shape helps to reduce drag and wind noise, and the low-profile design and flat cargo area make it easy to load gear. The basket mounts to square bars with included hardware. And it's constructed of aluminum with a silver powder coat finish so it won't rust if you leave it on your roof.


Aerodynamic Shape

Inno Shaper 100 cargo box

The Shaper 100 front panel works like a fairing to direct air up and over the basket. This reduces drag and wind noise as you drive. And the basket sits flush with the top of your crossbars to create a low profile.


Easy-to-Load Design

The basket has tapered side walls that allow you to easily load your gear. The floor is made of flat panels that make it easy to shift and properly position cargo.


You can secure your gear to the basket with straps, rope, or a cargo net (sold separately). If using a cargo net, attach the net hooks to the bottoms of the side walls or the front and rear panels. Straps or ropes should be routed under the basket and around your cargo to secure it in place.


Simple Installation

The basket installs easily on square crossbars with brackets and hand knobs. Simply set the brackets over your bars, swing the T-bolts into place under the bars, and tighten the hand knobs to secure the basket in place.


Rubber pads are included to cushion the bottom of the basket where it rests on your crossbars. This will protect the crossbars from scratches and help to reduce road noise.



IN569 Inno Shaper 100 Roof-Mounted Cargo Carrier - 110 lbs

Installation Details IN569 Installation instructions




Customer Reviews

Inno Shaper 100 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 41-7/8" - 110 lbs - IN569

Average Customer Rating:  4.4 out of 5 stars   (14 Customer Reviews)

Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Clamps to square crossbars.

by:

Sturdy and easy to put together!



by:

The rack was fairly easy to put together. Just use hand tools and take your time. The instructions said to lay out the floor slats inside the frame before installing, make sure you do that because do to the shape you cannot put them in after the frame is put together (I learned the hard way). Also this basket was for my Tesla Model 3 and the T-Slot bolts are too short to work without bending down the brackets. I have a support ticket with Inno to see if they have longer T-Slot bolts ( guessing they need to be around 1 3/8” to 1 1/2” long. The ones it comes with are only 3/4” which is fine if you have a flat T-slot equipped roof rack but the Tesla roof rack is curved so the attachment bolts need to be longer. Also I had to use the included plastic spacer and one I made from some left over laminate floor to wall spacers and 7 stainless steel washers to fill the gap the curved rack makes between it and the basket. See pictures. It does work and does not look too bad.



by:

Well designed , low profile and light .Had to make a very minor adjustment to the rear T-slot hardware part to make it fit on my Prius standard roof bars . Other than that …. Very happy !!!



by:

Very pleased with the product and support provided by the etrailer team. The installation to the existing racks was quite easy. George from etrailer provided me with the contact of the manufacturers (Californian-based) which was great for a successful assembly. Recommended product and thumbs up to the etrailer team.



by:

Light, strong, easy to put together and install.
Only complaint is self tapping screws holding the 4 flat panels in place do not sit flush and hold tight. Instructions warn not to over tighten as I am sure this has been a problem others had.
Panels tend to rattle with no load on them.



by:

Very disappointed in this rack. Bought an inno rack thinking it would be higher quality than a Chinese rack off [other retialer], but wish I saved the $XX and just went with something else. The screws for the slats fit into a slot on the bottom of the slats. The frame isn't threaded which leaves the screws crooked and mildly stripped because you're creating your own threads in the aluminum frame. The slot also isn't threaded, leaving the slats to rattle around. There is also no channel on top of the slats for t-bolts, and the instructions say not to put a hook on the frame which significantly reduces usable area if you need to secure to the slats. I'd rather have bought a $XXX rack, gone to Home Depot for some upgraded hardware, and replaced every year or two rather than spend the $XXX on this rack. ETrailer return policy is unused/uninstalled, which really only leaves you the opportunity to return if you've simply had a change of heart rather than disappointed in a poor product. Would strongly recommend to purchase something else off [other retailer].



by:

Great product so far expedited shipping overall very well please product looks sturdy and well built




by:

Put this on my wife’s 18 Cherokee trail hawk. Needed a bit more room for luggage. There has been a bit more wind noise with this rack. It is pretty light which makes it easy to remove. It has a decent payload and my wife likes the look. Happy wife, happy life...



by:

Great job!



by:

Low profile-Sturdy



by:



by:



by:


14
14

See what our Experts say about this Inno Roof Basket

  • Which Position Does Mounting Hardware Get Installed On Inno Shaper 100 Cargo Basket IN569
    That is correct. To install the Inno Shaper 100 # IN569 on your 2023 Subaru Crosstrek you'll need to have a stay measurement shown in the below diagram of 36-3/8" or more to have the mounting hardware in the inner position. If you have a measurement of less than 36-3/8" you'll need to position the mounting hardware to the outer position.
    view full answer...
    Image 1 for
  • Can Channel Mount Hardware be Installed on Silver Inno Shaper 100 Cargo Basket
    The Inno Shaper 100 Roof Cargo Basket - Channel Mount # INXA569 is what you'll need to use if you want to install the cargo basket via the T-Slots on your crossbars. The Inno Shaper 100 Roof Cargo Basket - Square Bars # IN569 you're interested in has a different mounting hole configuration so the hardware used in the channel mount setup is, unfortunately, different. I confirmed this with my contact at Inno.
    view full answer...
  • Will Inno Shaper 80 Roof Cargo Basket IN568 Fit Rhino-Rack DS1375B 2500 Square Crossbar Roof Rack
    The Inno # IN568 Shaper 80 Roof Mounted Cargo Basket is designed to fit Inno's square crossbars which measure 1-1/4 inches wide by 7/8 inches tall, which is the same exact size as your Rhino-Rack 2500 series square bar roof rack. So, the Shaper 80 basket will work perfectly with your existing roof rack.
    view full answer...
  • Roof Rack for Mounting Solar Panel on RV with Factory Rain Gutters
    The Inno Feet for Square Crossbars # INSD referenced in your question are designed to attach to factory rain gutters like what it sounds like you have on your RV. Installing these feet along with a pair of square crossbars like the 71 inch # IN434 should work well to mount your solar panel on the roof. I do also recommend adding a cargo basket like the Inno Shaper 100 # IN569 to the crossbars to provide a flat and stable mounting surface for the solar panel.
    view full answer...
  • Can Inno Shaper 80 or 100 Roof Basket Attach to Thule Aeroblade/Wingbar Crossbars
    Yes, we do have versions of the Inno Shaper 80 and 100 that will fit into the top channels of your Thule Wingbar/Aeroblade crossbars. For the 100 you'd want the # INXA569 and for the 80 you'd want the # INXA568 and you'd be set!
    view full answer...
  • Inno Roof Platform/Basket Fit for 2021 Subaru Crosstrek with Factory Roof Rack
    The Inno # IN569 Shaper 100 roof basket is only compatible with square profile crossbars that measure no more than 1-1/4 inches wide by 7/8 inches tall, so unfortunately it won't work with your existing roof rack. This being said, I do have a similarly-sized Inno roof platform that would work for you. The Inno # INA510 Roof Deck 39-1/2 x 43-1/4 is compatible with round, square or elliptical crossbars, so it'll work just fine with the crossbars on your Crosstrek, as long as their distance...
    view full answer...
  • Cargo Basket For 40" Crossbar Spread On Tear Drop Trailer
    I have an option for you but 40" would be too much crossbar spread because the Inno Shaper 100 Roof Cargo Basket part # IN569 is only 46-1/2" long. I recommend Rhino-Rack XTray Pro Cargo Basket part # RRRMCB03 which is 58-1/4" long x 41" wide but will fit a crossbar spread 25-1/2" - 43-1/4" so it will fit your cross bar spread as long as the bars are round, square, aero or elliptical and no larger than 3-1/2" wide x 1-1/4" tall. This is the most cost effective option that will fit your...
    view full answer...
  • Is There a Way to Add the Inno Shaper 100 Roof Rack to My Non-Square Crossbars on My 2018 QX60?
    I have a basket solution for you. While there is a way to attach the Inno Shaper 100 if you have aero-style crossbars on your 2018 Infiniti QX60, but the solution will only work if you have compatible t-slot channels in your current crossbars. I went ahead and attached a picture of the required t-slot dimensions to this answer. I recommend that you measure your channels to make sure the Shaper 100 will fit. Also, Inno only provides this basket in a black finish. This is the # INXA569. If...
    view full answer...
    Image 1 for
  • Roof Cargo Carrier Recommendation for Popup Camper Roof Rack
    For your application I recommend going with the Inno Shaper 100 # IN569 if your roof rack has square bars, or the Inno Roof Deck Platform Rack # INA510 if you have any other style of crossbars. These cargo carriers have an aluminum construction so if water happens to get inside the bars it won't rust like the steel carriers do. The Shaper 100 weighs in at 17.4 lbs and has a weight capacity of 110 lbs which will be perfect for you since the weight of the cargo basket will factor in to the...
    view full answer...
  • Recommended Large Aluminum Roof Tray/Basket for 2002 Lexus LX 470
    It sounds like you are looking for a large aluminum roof basket/tray for your 2002 Lexus LX 470 and if that's the case we do have some great options but maybe not exactly what you are looking for due to budget constraints. In regards to the material, aluminum is great because it's super lightweight and durable but one thing it is not is cheap. The Inno Shaper 100 Roof Cargo Basket part # IN569 is our best option for you based on what you described. If you are willing to consider steel,...
    view full answer...
  • Recommendation for Attaching Solar Panels on the Roof of a 2010 Ford E-350 Van
    For a roof rack to fit your 2010 Ford E-350 Van, I recommend the Inno Square Crossbars, # INB165, and Inno Feet for Square Crossbars, # INSD. The square load bars measure 65 inches long x 7/8 of an inch tall X 1-1/4 inches wide. The two crossbars have a weight capacity of 220 lbs. The Inno feet # INSD use the rain gutters of your vehicle to attach to the roof. The feet include a special wrench that will allow you to munt the feet to the van. The wrench makes installation quick and easy. For...
    view full answer...

Do you have a question about this Roof Basket?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Installed by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee John S
Video by:
John S
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Ronnie R
Written by:
Ronnie R
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.